Insulated DC/DC converters

Output voltage: 24 V - 220 V
Power: 500 W

The PWD 506 has a continuous rated power of 500 W and is available for input voltages and output voltages of 24 - 220 V.

Input voltage: 24 V
Output voltage: 12 V

High frequency voltage reducers in order to convert 24VDC direct current, into12VDC. Isolated from earth. A large selection of voltages: 17.0 to 32.0 VDC. Exit voltages: 13.6 VDC +/- 15%. Wide range: between 3 & 24 amps. ...

Input voltage: 30 mV - 400,000 mV
Output voltage: -10 V - 10 V

Deif's Ecom TDG-210DG apparatus is a CE-marked, DC/DC industrial insulation amplifier. This amplifier delivers galvanic separation capabilities between input and output components.

Input voltage: 12, 13.5 V
Output voltage: 10 V - 17 V

Last generation very compact and reliable DC-DC converter with input and output galvanic insulation. Floating polarity reverse facility, negative or positive to ground for telephone ...

Input voltage: 16 V - 70 V
Output voltage: 50, 9.6, 12, 5, 28 V
Power: 50 W - 403 W

The MilQor® series of Mil-COTS DC-DC converters brings SynQor’s field proven high-efficiency synchronous rectifier technology to the Military/Aerospace industry. These "off-the-shelf" ...

Input voltage: 48 V
Output voltage: 230 V
Power: 1,000 W - 4,000 W

... Technology The ECI technology offers both AC and DC inputs to provide a secured AC power while reaching a 96% conversion efficiency (reducing the number of power conversion under normal condition)! The DC ...

Input voltage: 11 V - 30 V
Output voltage: 250 V - 6,000 V
Power: 10 W

10W High Power on-board Miniature HV Module RD series is a compact on-board type power supply with such high voltage and high power as maximum 6kV@30W. With our original and high efficiency switching power conversion techniques, we realized ...

Input voltage: 3.3, 5, 12, 15 V
Output voltage: 3.3, 5, 9, 12, 15 V
Power: 1 W

Miniature surface mounted DC/DC Converters are an ideal and economical solution for many applications where noise reduction, voltage isolation, voltage conversion in distributed power systems is required. these converters ...

Output voltage: 3, 5, 12 V
Power: 300 W

High efficiency, high reliability 2:1 input range input and output isolation Soft start function, low inrush current Input over voltage and under voltage protection Over load, over voltage & short circuit protection +3.3V, +5V main ...

Input voltage: 11 V - 60 V
Output voltage: 13.8 V - 600 V
Power: 120 W - 420 W

Whether for a vehicle, communications tower site, or off-grid power system, ICT’s Isolated Series 2 DC-DC converters come with the added assurance of years of proven ICT reliability and ...

Input voltage: 48 V
Output voltage: 600 V
Power: 3,500 W

... bidirectional DC/DC Converters. EPCs (Epic Power Converters) are suitable for a large number of applications ranging from industrial ones to those in the field of renewable ...

Input voltage: 9.5 V - 75 V
Output voltage: 3.3 V - 15 V
Power: 15 W

... Potentiometer Output LED Indicator DIN Rail Mounting or Panel Mount Options The Recom Power Module takes a standard 15W-60W converter and mounts it on a PCB with screw terminals, an EMC filter, input protection circuitry ...

Input voltage: 0.7 V - 12 V
Output voltage: 3 V - 6,000 V
Power: 1.5 W

The G Series is a line of miniature high voltage converters that provide up to 6kV output, positive or negative, in a compact PCB mount package. The isolated output is directly proportional to the input, and is linear ...

Input voltage: 8 V - 48 V
Output voltage: 5 V

PC/104 DC to DC + 24-bit digital I/O card Input : +8V to +48 VDC Output : 5V @ 2A Overload/Overheat Protection 24-bit ditital I/O lines , emulate 8255 PPI mode 0 Transfer rate :300 KB/s (typical)