IP44 motors

Power: 10 W - 700 W
Rotational speed: 5,000 rpm
Diameter: 40 mm - 63 mm

APPLICATION - Industrial use DESCRIPTION - Ferrite magnets - According to IEC standards - Construction type B3, B14 or B5 - Insulation Class F - Heating Class F - Option: Tachymetric dynamo - Option : Encoder - Option: Brake

Power: 1.5 kW - 200 kW
Intensity: 4.25 A - 490 A
Torque: 539 Nm

... degrees C. The two kinds of motors have the same parameters. The motor has good closeness. The motor protection level for general places is IP44, ...

Power: 0 W - 23,000 W
Intensity: 0 A - 820 A
Torque: 0 Nm - 26 Nm

... brushless motors use a compact design with an external rotor that provides smooth, stable rotation. These motors are capable of achieving higher torque than its counterpart inner rotor designs. The higher ...

Power: 0.75 kW - 7.5 kW

The permanent magnet synchronous motors is suitable for low-speed and large torque occasions. •The motor shaft to go directly into the equipment •Concentrated stator winding,multipolar rotor design •Stable ...

Power: 70, 114 W
Intensity: 6.9, 4.6 A
Torque: 0.35, 0.23 Nm

Operation: on the external standard controller (block commutation); Rotor position sensing by 3 hall sensors Connection: K4 terminal box for power supply and sensors Rotor: 4-pole neodymium magnet, low cogging torque due to continuous ...

Power: 550 W - 37,000 W
Intensity: 1,500 mA - 69,800 mA
Rotational speed: 3,000, 1,500, 1,000, 750 rpm

... electromagnetic braking three-phase induction electric motor is a derivative product of Y(Y2)series three- phase induction electric motor by attaching a coaxial electromagnetic ...

Power: 0.18 kW - 1.1 kW
Rotational speed: 2,800, 2,850, 1,400 rpm
Diameter: 190, 156, 176 mm

... Ambient temperature: -15°C<0<40°C Altitude: Not exceeding 1000meters Protection type:IP44/IP54 Cooling type:IC 0141 Insulation class:B/F Rated frequency: 50Hz (60Hz is available ...

Power: 2.3 kW - 8.7 kW
Rotational speed: 1,320 rpm - 3,200 rpm

Torque: 4 Nm
Rotational speed: 300 rpm

Used in textile machinery, row winding, the weft tension torque, output, to row to tight winding. Specifications: Ability to load and balance. To ensure that the load constant speed, constant power or constant tension operation

Power: 0.37 kW - 5.5 kW
Rotational speed: 1,410 rpm - 2,940 rpm

YC SERIES CAPACITOR STATOR ELECTRIC MOTOR Housing:Cast-iron housing Capacitor start motor Centrifugal switch big torque Introduction YC series heavy-duty single-phase motors ...

Power: 0.25 kW - 2.2 kW
Intensity: 2.8 A - 8.52 A
Rotational speed: 1,400, 2,800 rpm

... phase dual - capacitor induction motor is designed and manufactured in according with national standard , newly developed by our company w ith low noise , compact dimension , Iight weight . easy maintenance . etc . These ...

Power: 100 kW - 50,000 kW
Diameter: 355 mm - 2,530 mm

... Protection level: IP44, IP54 Cooling method:IC611 Motor model: YR (YRKK, YRKS) Standard: IEC, DNV, GB YR (YRKK, YRKS) series 6kv, 10kv high-voltage three-phase ...

Power: 0.5 kW - 2,500 kW
Torque: 10.6 Nm - 15,102 Nm
Rotational speed: 280 rpm - 3,860 rpm

... protection IP23, cooling method IC06. Custom made customizations On request are available: A wide range of accessories such as encoders, tachometers, brakes, sensors and relays. Various mounting forms and cooling ...

Power: 750 W - 315,000 W
Intensity: 1.5 A - 559 A
Torque: 2.3 Nm - 2,019 Nm

... 4 poles electric motor has features of low speed and high torque. The voltage range is 200V-660V on request, and the frequency is 50 Hz and 60 Hz. The body is cast iron or aluminum and equipped with SKF ...

Power: 0.55 kW - 315 kW

... Power :0.55kw-315kw AC motor Operating mode :S1 Standard: IEC standards Frame size :80-355 cast iron frame Cooling method ;IC411 Frequency : 50hz or 60hz Insulation class : B ,F ,H grade Shell protection grade ...

Power: 160 kW - 25,000 kW

... - 　160～25000Kw • 　Poles： - 　2-24 • 　Voltage： - 　690～15000V • 　Frequency： - 　50HZ, 60HZ • 　Protection degree： - 　IP23、IP44、IP54、IP55 • 　Cooling ...

Power: 150 W
Diameter: 47 mm - 90 mm

... Induction motors are AC electric motors, in which the rotation speed of the rotor is lower than the rotation speed of the magnetic field of the stator: this difference in synchronicity ...

Power: 9,000, 7,500, 7,000, 10,000 kW

... strength. Marelli Motori motors for continuous duty operation are designed to meet vibration levels per IEC 60034-14, ISO 10816-1 and BS 5000-3. Shield Made of grey cast-iron (EN 1561 – GJL 200) up to 500 frame size ...

Power: 0.15 kW - 150 kW
Rotational speed: 500 rpm - 3,600 rpm

... Direct current motors with protection class ratings from IP 44 to IP 55 are especially suited for use in damp, extremely dirty or aggressive environments where a high ...

Power: 185 kW - 5,000 kW

... various comm.on machines and equipments such as compressors,fans,water pumps and crushers.Furthermore they can function as prime motor in relatively severe conditions includeing petroleum,chemical,pharmaceutical and mining ...

Power: 70 W - 1,500 W
Rotational speed: 1,600 rpm - 4,000 rpm

... • Warehouse Logistic Application: • Motors For Hydraulic Mini Power • Hydraulic Pumps Motors • Taillift Motors • Forklift Motors • Marine Motors ...

Power: 100 ch - 30,000 ch

... without the need of changing gearboxes, which enhances system efficiency. Options for various protection grades, including IP22/23/44/45/54/55/56, are available, in addition to complying with IEC, CNS, ...

Power: 180 W - 2,200 W
Intensity: 1.88 A - 120 A
Torque: 2.2 Nm - 3 Nm

YC series Capacitor-Start Asynchronous Motor Description YC series motor is of full-close rat-cage single phase capacitor-start asynchronous motor cooled by fan, the motor ...

Torque: 50 Nm - 120 Nm

The RMA 20 tube motor: Thanks to a steel gear unit and a fully-developed motor pack, this delivers great reliability and long service life. Torques of 50 Nm and 120 Nm. Much less expensive than its ...