IP65 motors

Power: 0.09 kW - 1,000 kW
Rotational speed: 1,500 rpm - 6,000 rpm
Operating temperature: -55 °C - 40 °C

Our robust explosion proof low voltage motors run for an enormously long time and with absolute reliability even under the most extreme conditions - both on the mains and on all available converters. Our Ex motor ...

Power: 0.12 kW - 7.5 kW
Torque: 1.5 Nm - 20 Nm
Operating temperature: -20 °C - 40 °C

... constant torque - More dynamic than conventional three-phase AC motors - Speed control via the integrated frequency inverter enables universal use - Optimized for use as geared motors with g500 gearboxes

Power: 1 kW
Rotational speed: 3,000, 2,100 rpm

... connections for power and encoder cables. Together with this universal connector system, the new 8LVA series offers either IP54 or IP65 protection (with optional oil seal) to handle ...

Power: 160 kW - 27,000 kW

... bearing • Rotor: wound and with collector rings • Brush holder: with motorized brush lifting system Motorized brush lifting implies important advantages in the performance of the motor ...

Power: 2,240, 1,000 kW
Operating temperature: -50 °C - 60 °C

... , and thus allowing even higher energy savings • High protection level, IP class up to IP66 • Safe area motors equipped with digital Smart Sensor, allowing easy access to motor ...

Power: 150 kW - 1,500 kW

... compared to air-cooled motors Patented high performance membrane LC motor is delivered with a waterproof breather plug which is air and steam permeable, but perfectly tight to liquids (mini IP66). ...

Intensity: 1 A - 6.1 A
Torque: 0.3 Nm - 37 Nm
Rotational speed: 0 rpm - 600 rpm

... Stepper Motors • Closed Loop Performance, No Hunting or Gain Tuning • AC or DC Input Types • Parallel Shaft and Right Angle Geared Types for Higher Torque, Space Savings • Electromagnetic Brake ...

Intensity: 1.68 A
Torque: 0.44 Nm
Operating temperature: -20 °C - 50 °C

... treatment on lead wire exit and endbell, IP65 protection class NEMA17(42mm) IP65 HB Stepper Motor Waterproof Stepper motor, high ...

Power: 3,000 W
Rotational speed: 300 rpm - 2,000 rpm

... according to NEMA MG1 • Welded casing, water-cooled stator with additional internal cooling circuit (radial fan NDE-sided on motor shaft) • IEC size 630 • Rotational-speed range in operation with VFD 300 – 2000 r/min • ...

Power: 0.55 kW - 22 kW

The compact unit, consisting of motor and frequency converter, offers outstanding cost advantages compared to conventional units: - no costs for drive configuration - thanks to the compact setup ...

Torque: 0.017 Nm - 50 Nm

... new motors' line, suitable for many different purposes. ● Suitable for many different application fields ● Advanced construction solutions: √ up to 40% torque increase than standard motors ...

Power: 0.06 kW - 315 kW
Torque: 2.5 Nm - 3,054 Nm
Rotational speed: 925 rpm - 2,990 rpm

... Degree of protection IP55, IP56, IP65, IP66 Température class 155 (F) according to 130 (B) or 180 (H) according to 155 (F) Cooling method IC411, ...

Vibration-proof IP65 stepper motor with custom spindle

Power: 0.55 kW - 7.5 kW
Torque: 1.8 Nm - 48 Nm

... active production. The FCM 300 induction motor is no longer available as a spare part. Limited supplies of frequency converters and accessories are available as spare parts. Integration of frequency converter and motor ...

Intensity: 4, 4.5 A
Torque: 0.8 Nm - 2.9 Nm
Operating temperature: 0 °C - 85 °C

... TXM24S-1RG integrated StepSERVO™ is a drive+motor unit, fusing a NEMA 24 step motor and a servo drive into a single device. Power to the drive, located at the rear of the motor, must ...

Power: 0.37 kW - 3,000 kW
Torque: 1 Nm - 50,000 Nm
Rotational speed: 300 rpm - 3,600 rpm

... protection classes: IP56 (protected against powerful water jets) IP65 (dust-proof) IP66 (dust-proof and protected against powerful water jets) IP67 ...

Power: 180 kW - 2,250 kW
Torque: 1,283 Nm - 20,615 Nm

... part of the trade fair SPS IPC Drives 2014, the ATB Group introduced its new transnorm motor range for the first time. The company will launch the surface-cooled motor already at the beginning of 2015. The ...

Power: 0.09 kW - 75 kW
Rotational speed: 3,000, 1,000 rpm
Operating temperature: -20 °C - 40 °C

... Ex-proof electric motors are designed to withstand gas or vapor explosions while preventing sparks that could come into contact with explosive gas or dust in the environment and cause an explosion or ...

Power: 150, 235, 312 W
Intensity: 7.4, 8.7, 4.9 A
Torque: 2.2, 2.8, 3.5 Nm

The new high-torque BLDC motors from ELRA have a significantly higher torque compared to standard motors of this size. The high-pole rotor design with a nominal speed of 750 rpm makes these motors ...

Power: 0.75 kW - 375 kW

• According to standards: • IEC 60079 – 0, 7 • IEC 60034 – 1, 2, 5, 6, 7, 8, 9, 12, 14, 30 • IEC 60072 • Ex db, Ex db eb / Ex-tb, Ex-tc • Temperature Class T3 • Zones 2 / 21, 22 • Max surface temperature [°C] T150, T135, T125, ...

Power: 0.4 kW - 19 kW
Torque: 3 Nm - 293 Nm
Rotational speed: 4,500 rpm - 6,000 rpm

... permanent magnet SPM or internal permanent magnet IPM motors are optimised for intermittent or continuous duty and dedicated to traction, steering or hydraulic systems. With ingress protection of up to IP67, ...

Power: 250 W
Torque: 0.7 Nm
Rotational speed: 3,000 rpm

NEMA 34 BLDC motor (86 mm) with protection class IP65 (except shaft outlet). This motor requires no additional Hall sensors and is therefore extremely fail-safe. The ...

Power: 0.18 kW - 500 kW
Intensity: 0.53 A - 863 A
Torque: 0.62 Nm - 3,210 Nm

D1 series motor for our company has the independent intellectual property exclusive design of a new series of products. This series of products include: D1C series motor: cast iron frame, end cover ...

Power: 0 kW - 12 kW
Intensity: 0 A - 380 A
Torque: 0 Nm - 21.8 Nm

... Water-Cooled Brushless Motor 12kw D85L134 motors are designed for high performance gearless use, and are ideal for underwater thruster applications where rapid acceleration and high speed are called ...

Power: 70, 114 W
Intensity: 6.9, 4.6 A
Torque: 0.35, 0.23 Nm

Operation: on the external standard controller (block commutation); Rotor position sensing by 3 hall sensors Connection: K4 terminal box for power supply and sensors Rotor: 4-pole neodymium magnet, low cogging torque due to continuous ...