IP67 I/O modules

• Safety fieldbox for EtherNet/IP with CIP-Safety • For connection of up to 8 safety switching devices • Integrated dual-port switch • Protection class IP66, IP67

The R95C is an IO-Link device hub that consolidates and sends discrete or analog signals to an IO-Link Master over a standard M12 cable. The R95C features eight input ports. For discrete hubs, each input port has two discrete channels ...

Featuring industry-standard top-exit M12 connectivity and 16 discrete PNP inputs, the R130C cost-efficiently integrates up to 16 non-IO-Link devices into an IO-Link system. Its compact size, along with IP65, IP66 and IP67 ratings, allow ...

Very safe mounting and high protection rating Digital inputs and outputs Fast detection and processing of analogue inputs Toolless mounting Three freely selectable directions of the flat cable

High vibration resistance due to full potting Sensor and actuator supply also possible with external voltage Reliable detection and display of peripheral and communication faults Addressing via infrared interface With ...

For the simple connection of binary sensors to any IO-Link master Data and energy transmission also possible with unscreened connection cable Clearly visible LEDs for displaying operation, switching status and error Robust ...

In addition to the ICE1 masters for PLC-based applications, two other modules are available for use in cloud-based and hybrid systems: the ICE2 (EtherNet/IP) and ICE3 (PROFINET) IO-Link master series. These support the industry’s leading ...

Compact modules with IP67 protection are now available, the PSS67 IO1 16FDI with SafetyNET p. Thanks to the fully encapsulated module electronics, the IP67 modules are particularly robust to dust and splashed water and guarantee full ...

With the PDP67 modules, Pilz offers solutions for decentralised applications directly in the field. Protection type IP67 means that the modules are resistant to dirt and water. The decentralised modules optimise installation and wiring ...

PROFINET device, EtherNet/IP device or Modbus TCP slave Integrated Ethernet switch Supports 10 Mbps/100 Mbps 2 × M12, 4-pin, D-coded, Ethernet fieldbus connection PROFINET S2 system redundancy ...

Glass fiber reinforced housing Shock and vibration tested Fully potted module electronics Protection classes IP65, IP67, IP69K M12, 5-pin, L-coded male connector for power supply Galvanically ...

PROFINET device, EtherNet/IP device or Modbus TCP slave Integrated Ethernet switch Supports 10 Mbps / 100 Mbps 2x M8, 4-pin, Ethernet fieldbus connection Glass fiber reinforced housing ...

remote I/O boxes transmit various input and output signals between master devices such as PCs or PLCs and secondary devices including sensors and actuators. The IO-Link master type ADIO-ILM can exchange signals from secondary devices ...

The PT series 5-pin M12 connector sensor distribution boxes offer flexibility for installing multiple sensors in various applications. With 4, 6, and 8 ports, the distribution boxes can supply power and receive signals for sensors using ...

GF 30% Polyamid 8(12)-32 VDC 1S Li-on Battery -40C +80C 1x IMU Sensor Up to 1 Frequency Input Up to 4 Current Inputs Up to 4 Resistive Inputs Up to 4 High-Side Outputs Up to 4 Low-Side Outputs Up to 1 Analog Output Up to 2 ...

GF 30% Polyamid 8(12)-32 VDC 1S Li-on Battery -40C +80C 1x IMU Sensor Up to 1 Frequency Input Up to 4 Current Inputs Up to 4 Resistive Inputs Up to 4 High-Side Outputs Up to 4 Low-Side Outputs Up to 1 Analog Output Up to 2 ...

GF 30% Polyamid 5(9)-12 VDC -40C +80C 1S Li-on Battery Up to 1 Frequency Input Up to 4 Current Inputs Up to 4 Resistive Inputs Up to 4 High-Side Outputs Up to 4 Low-Side Outputs Up to 1 Analog Output Up to 2 Solid State Relays

The xtremeBLOCK CANopen module combines many different I/O signal configurations. It offers a total of 12 inputs, eight of which can be parameterized as analog. The remaining four digital inputs can also be configured as frequency inputs ...

The xtremeDB -1 (pronounced: "dash one") CANopen module combines many different I/O signal configurations. It offers a total of eight inputs, up to four of which can be parameterized in analog mode. Two of the digital inputs can also ...

The xtremeDB -1 (pronounced: "dash one") SAE J1939 module combines many different I/O signal configurations. It offers a total of eight inputs, up to four of which can be parameterized in analog. Two of the digital inputs can also be ...

As a communication interface independent of the field bus, the sensors, actuators and I/O supporting the IO-Link protocol are IO-Link slave devices, which greatly improves the reliability of the devices. M12 series classification: - ...

PROFINET is an open industrial Ethernet communication protocol, designed to collect and transmit data in industrial systems, and can realize real-time data transmission and reception. It is a real-time industrial Ethernet. Since profinet ...

CC-Link IE Field Basic is a new member of the CC-Link IE protocol and was officially released in August 2016. This protocol is a bus network based on standard 100Mbps Ethernet, which is designed to provide a low-cost control network for ...

The SPC-SDIO-S0808SPK Intelligent Distributed IO is an affordable smart IO device developed by SonnePower. It features 1 CAN bus, 8 IO resources, and supports high-level voltage signal collection. With 3A output capacity, it can directly ...

SPM-SDIO-MD1 high-power IO module is equipped with 1 CAN bus, 1 DIH, 2 PWM outputs, and 3 H-bridge outputs. Additionally, this product features high protection level, high integration, and high response speed, making it an ideal choice ...

2 DIH inputs 1 PWM output with current feedback, rated current 6A 3 H-bridge outputs, rated current 15A 1 CAN, support CANOpen 1 status indicator All input ports support misconnection of power and ground. All output ...

The Profibus-DP IP 67 is a robust metallic slave that can be connected flexibly sing Ml 2 connectors to outputs and solenoid valves and/or inputs. Each connector can be used freely for • 1 Output + 1 diagnostic Input • 2 Outputs • ...