ISO cylinders

Stroke : 25 mm - 1,000 mm
Bore: 32 mm - 125 mm
Pressure: 70,000 Pa - 1,000,000 Pa

Built for ISO 6431 Dimensional Compliance and Reliability ISO cylinders give you the freedom to use internationally compatible mountings and accessories. We updated our FAQ2R Series ...

Stroke : 20 mm - 1,500 mm
Bore: 25 mm - 200 mm
Pressure: 215 bar

... produce undercuts in plastic injection molds. These cylinders are compatible with ISO VG 46 mineral oils. The V215CR are long strokes hydraulic cylinders and offer strokes up to 1500 ...

Stroke : 390 mm

Overview Series BCK Stretching Cylinders are direct replacements for Krones® stretch blow molding machines. These cylinders mount into the same space and bolt patterns, provide significantly longer service ...

Stroke : 25 mm - 1,000 mm
Force: 28 N - 235 N

UNIVER pneumatic cylinders which comply with ISO 6431 and VDMA 24562 standards, take advantage of the improvements arising from the research of the last years; infact, they can fully satisfy the most ...

Stroke : 5 mm - 500 mm

Pressure: 0.1 MPa - 1 MPa
Rod diameter: 32 mm - 100 mm
Speed: 50 mm/s - 1,000 mm/s

... environment. Conformance to ISO 15552 specification. Available with comprehensive internationally recognised range of fixed and flexible mountings. •AISI 316 stainless steel Fits the chemical, food and pharmaceutical ...

Stroke : 10 mm - 300 mm

Bore Ø: 8, 10, 12, 16, 20, 25 mm Stroke: 10 to 300 mm • This Series complies with ISO 6432-CETOP RP 52P • With permanent magnet • Adjustable stroke end buffer (Models Ø20 and Ø25

Pressure: 50, 80, 100, 160 bar
Rod diameter: 12 mm - 140 mm
Force: 0.95 kN - 402.12 kN

TIE ROD CYLINDER (ZHZ) BY AHP MERKLE •Hydraulic Cylinder according to DIN/ISO 6020/2 •Maximum operating pressure: 160 bar •Piston diameters from Ø 25 mm to Ø 200 mm •Multiple mounting ...

Stroke : 1,000, 5,000 mm
Force: 1.2 kN - 2,010.6 kN
Speed: 0.5 m/s

Hydraulic cylinders in accordance with ISO 6020/1 The range of hydraulic double-acting CMB 05 series cylinders and servo-cylinders has been developed to meet the most ...

ISO-VDMA STANDARD CYLINDER MCQV No lubrication Special housing and bushing enable self-lubrication of the piston rod. High quality and long service life Hard anodized aluminum cylinder ...

Stroke : 1 mm - 50 mm

Stroke : 25 mm - 1,000 mm
Bore: 32 mm - 320 mm
Pressure: 0.5 bar - 12 bar

ISO 15552 FARBO pneumatic cylinders are manufactured on CNC machining centres to guarantee low dimensional tolerances and unvarying performance over time. The barrels and end-caps are fully anodized ...

Pressure: 200 bar - 250 bar
Rod diameter: 45 mm - 70 mm
Speed: 0.5 m/s

At Bastimec we offer an extensive range of standard single-acting cylinders for various applications such as lifting platforms, trailers, etc ... All of our cylinders are manufactured under strict quality ...

Bore: 32 mm - 100 mm

VDMA / ISO Cylinders • Meet ISO 15552 and VDMA 24562 standard specification. • Avialable in 32, 40, 50, 63, 80 & 100 mm bore dia. • Cylinder in compact & streamlined ...

Stroke : 0 mm - 2,000 mm
Pressure: 250 bar
Rod diameter: 25 mm - 220 mm

Type 46 cylinders are engineered in a modular system. All mounting types with the exception of the type "trunnion" are based upon one basic form and are built by screwing mounting components. Different piston rod ends ...

Pneumatic stainless-steel cylinders in double and single-effect for linear actuation, suitable for corrosive environments Main features Heads in stainless steel AISI 316 Stem in stainless steel AISI 316 Tube in ...

Stroke : 20 mm - 50 mm
Bore: 20 mm - 50 mm
Pressure: 160 bar

... Caracteristics The CC short-stroke hydraulic cylinders can meet the need for small-sized presses. The main feature of these cylinders is their reduced overall dimensions, compared with ISO ...

Stroke : 3,000 mm
Pressure: 160 bar
Rod diameter: 12 mm - 140 mm

Tie-rod cylinder - ISO 6020/2 • Tie rod construction • Easy replaceability of the cylinder due to normed DIN standard sizes • 13 types of attachment • 2 seal variants

Stroke : 0 mm - 1,800 mm
Bore: 25 mm - 160 mm
Pressure: 0 bar - 280 bar

... the end of the piston stroke; - rephasing cylinders (master and slave cylinders); - cylinders can be provided with pilot check valves and other valves as agreed with the customer. For ...

MRHQ Rotary Gripper Pneumatic Cylinder Our MRHQ Rotary Gripper Pneumatic Cylinder has high quality and good price.... Feature: 1.Gripper Inside Diameter/Size: ø10, ø16, ø20, ø25 2.Rotary gripper ...

Force: 98 daN - 157,079 daN
Speed: 0.5 m/s

Bloc cylinder Power supplies and possible fasteners on each side of the cylinder Operating pressure 500 bar Bore Ø16 to Ø200 mm Seals Iso Double seal on rod ...

Stroke : 10 mm - 1,000 mm
Pressure: 0 bar - 10 bar
Force: 482 N - 7,359 N

COVERS Painted die-casted aluminium TUBE Anodized aluminium PISTON NBR + Steel SEALS Poliurethane - NBR GUIDE BUSH Sintered bronze PISTON ROD Chromium coated steel MAX PRESSURE 10 bar WORKING TEMPERATURE From ...

Stroke : 10 mm - 500 mm

Available in bores Ø 8-10-12-16-20-25. Execution for high temperature on request. Models with or without cushioning. Extremely resistant thanks to the double rolling assembly procedure.

Features: Available in diameters from 25 to 200mm, and with any stroke length Tie rod cylinder Normal and strengthened rod Varied fixing elements Normal, high temperature and low friction sealing Adjustable cushioning ...

Stroke : 390 mm - 2,780 mm
Speed: 0.2 m/s

The item has a cylinder that conforms to the requirements of ISO 6020/2 and can work to a maximum working pressure of 200 bar. The test pressure is slated at 300 bar with the maximum working speed is ...