ISO valves

DN: 0.125 in - 0.75 in
Pressure: 414, 1,035, 690 bar
Temperature: -40 °C - 121 °C

... ®, CTFE Valve Stem 17-4 Stainless Steel Remaining Parts -316 Stainless Steel, Brass Flow CapacityVA Series -Valve: Cv = 0.75 -VG Series Valve: CV = 2.0 Weight (approximate) -VA ...

DN: 1 in - 10 in

... MR0175-2002, MR0175-2003, MR0103, and MR0175/ISO 15156. -Ball seal inspection and replacement is done at the valve body inlet, without removing the actuator or disassembling the valve. -The ...

DN: 0 mm - 1,200 mm
Pressure: 0 bar - 830 bar
Temperature: -196 °C - 570 °C

... Nuovo Pignone Antisurge valve center of excellence is located in Bari (Italy), with capacity and aerodynamic noise testing facilities. The design and production are certified ISO9001 and ISO/TS29001. Nuovo ...

DN: 50, 15, 40, 25 mm
Pressure: 16 bar
Temperature: -15 °C - 130 °C

... and reliable control Features Regulating valve free of silicone grease with female thread DIN EN ISO 228-1 G for the control of cold/hot water in closed circuits In combination with AVP 142 and AV ...

... Continental has a full range of stack valves including check, flow control, relief, reducing, sequencing, shuttle valves and counterbalance valves – all manufactured to NFPA and ANSI/ISO ...

DN: 10 mm - 80 mm
Pressure: 10 bar
Temperature: 5 °C - 80 °C

Modular design Silicon-free Buttress thread for perfect fit of the union nut Integrated bracket for fix point mounting Easy switch between different configurations due to special features and fitting devices Seal ...

DN: 101.6 mm
Pressure: 207 bar
Temperature: -54 °C - 204 °C

... line exceeds preset value, the valve relieves pressure to port 4. Features Two valve functions in one, industry-common cavity. Adjustments cannot be backed out of the valve. Relief ...

DN: 25 mm - 500 mm
Pressure: 10 bar - 50 bar

... actuated on/off valves. The ball valve meets ISO standards. The valve is available with threaded ends, welding ends or flanges. It is also possible to combine different ...

DN: 28 in - 40 in
Pressure: 110 psi
Temperature: 175 °F

... each side of the valve for lower bolt tightening torque. Stem shall be of 304 stainless steel non wetted, 2-piece design fully engaging with the disc. Valves shall have a molded ISO ...

DN: 0.5 in - 2 in
Pressure: 138 bar
Temperature: 0 °F - 400 °F

The NIBCO® carbon steel ball valve provides bubble-tight shutoff at 2000 PSI. This valve is available with socket weld pipe connections and cast ISO mounting pad for actuation purposes. ...

DN: 50 mm - 400 mm
Pressure: 16 bar
Temperature: 50 °C

Resilient-seated gate valve with bolted cover connection and flanges according to the ANSI/AWWA standard. Proven design with innovative improvements, such as plastic sliding caps on the wedge, guarantee low operating ...

DN: 0.25 in - 2 in
Pressure: 6,000 psi

... ASTM-A351-CF8/ EN10213 1.4308), S-20C (ASTM-A216-WCB, EN10213 1.0619) Full port, Threaded end, Blow-out proof stem Mounting pad ISO 5211, Locking device, Casting handle

DN: 63 mm - 320 mm
Pressure: 4 bar - 7 bar
Temperature: 80, 50, 120 °C

Well suited as shut-off device for pumps. Key features are easy and fast maintenance and virtually shock-free locking.

DN: 15 mm - 250 mm
Pressure: 16 bar - 40 bar
Temperature: -5 °C - 200 °C

... Special types ball valve Monoball KHO Pre-insulated design for plastic casing pipe systems Pre-insulated drainage and vent port with stainless steel for the plastic casing pipe systems Top flange in ...

DN: 5 mm - 16 mm
Pressure: 0.5 bar - 10 bar
Temperature: -10 °C - 70 °C

... 34/EU (ATEX) available. (Chapter 13) A quick exhaust valve is used to increase the speed of a pneumatic cylinder. The flow from the control valve to the cylinder ports is unrestricted. If valve ...

DN: 50, 63, 90, 110 mm
Pressure: 3.5 bar

... connect pipe with internal diameter 38mm). • Easy to open and close. • Light weight. • It is provided with the valve a safety clip to fix the valve in open position. • Specially indicated for swimming-pools ...

DN: 15 mm - 200 mm
Pressure: 16 bar
Temperature: -60 °C - 200 °C

... adjustable stem sealing Specifications •Design - ISO/DIN •Nominal Pressure - 16 bar •Lining - PFA •Housing Material - EN-JS 1049 •Face-to-Face - DIN EN 558-1 and ISO 5752 series 1 •Flanges ...

DN: 40 mm - 400 mm
Pressure: 60 psi - 365 psi

... hydraulic, line pressure operated deluge valve, designed specifically for advanced fire protection systems and the latest industry standards. The 400Y-1MC is activated by a hydraulic relay valve which ...

DN: 15 mm - 50 mm
Pressure: 100 bar
Temperature: -20 °C - 100 °C

industry, high temperature, high pressure PRESSURE PFA/PS in bar BALL : stainless steel 316 - SEALS : PTFE SPECIAL : ISO EN 5211 top connection, actuation possible

DN: 100 mm
Pressure: 250 bar

... round body ball valves designed for use as on/off devices for hydraulic applications. For direct ISO flange connection according to ISO 6164. Pressure range: up to 400 bar / 5800 PSI ...

DN: 40 mm - 150 mm
Pressure: 16, 10 bar
Temperature: -10 °C - 200 °C

... antistatic device. Thanks to the ISO 5211 plate, an actuator can be installée! on the valve. SPECIFICATIONS : • - Full bore • - Anti blow-out stem • - PTFE packing and stem O ring in FKM • - ...

DN: 8 mm - 100 mm
Temperature: -20 °C - 230 °C

YR240 Brass ball valves PN 40 with pneumatic actuator -Full bore ball valve -Anti blow out stem -Top-flange according to DIN-ISO 5211 -Direct mounting TECHNICAL CHARACTERISTICS Temperature-20°-120°C Fluidair, ...

DN: 20 mm - 63 mm
Pressure: 10 bar

... Technical features • Polypropylene compression nut. • HDPE seats. • EPDM O rings. • Dimensions complying with EN ISO 1452 : Plastics piping systems for water supply and for buried and above-ground drainage ...

DN: 15 mm - 80 mm
Pressure: 10 bar - 400 bar
Flow rate: 0.1 m³/h - 6.3 m³/h

... limited by the design of the valve. The valve seat and plug are made of ceramic or solid stellite materials, the mechanical performance of which assures high durability of the product. We can adjust ...

DN: 8 mm - 200 mm
Pressure: 100, 16 bar
Temperature: -50 °C - 280 °C

... are conducted according ISO 5208 international standard. Fugitives Emissions Our valves are tested according TA LUFT 02/27/1986 (Pt 3.1.8.4) requisition. Measure show leakage rate much lower than ...