Jacks

Lifting height: 495 mm
Height: 80 mm

Jack for passenger cars and vans Very low minimum height of only 80 mm Wide and robust frame made of high-strength steel Precise and safe control whilst lowering Manual dead man’s release for optimum safety when ...

Compact and lightweight jacks for easy transportation. Load can be lifted with either toe or main plunger. Fitted with relief valve to prevent overloading. Excellent for lifting load in reduced access situations. ...

Lifting height: 14.8 in

Lock nuts for extended load holding. Grease fitting for added weather protection. Stop ring for piston blow-out protection. Plated piston to resist scoring & corrosion. Lock nuts for extended load holding.

Lifting height: 125 mm

The J20 is a single stage jack from Olmec. It has a maximum capacity of 20.000 5g per stage, with working pressure of 10 Bar - 143 p.s.i. The jack has minimum height of 225 mm, and a maximum cylinder ...

Lifting height: 110 mm
Stroke: 330 mm
Weight : 2,260 g

for all common passenger cars and small transporters light and compact shape Packaging contents: 1 Total length mm: 420 Width in mm: 85.0 Packaging height, mm: 104 Packaging width, mm: 126 Packaging length, mm: 442

Lifting height: 198 mm - 390 mm
Stroke: 122 mm
Weight : 4.28 kg

CP81 bottle jacks are supplied with one handle to pump - two parts to assemble/disassemble - with a small hook to work deep under the vehicle. Vertically applicable providing the pump points upwards. The fast-track lifting ...

Lifting height: 500 mm
Height: 200 mm
Stroke: 300 mm

... weight: 16kg Warranty period - 2 years Product weight - 16.00 kg Max. height - 500.00 mm Min. height - 200.00 mm Jack type - Pneumatic Maximum load (T) - 2.00 T Tariff code - Tariff Normal (TN) Warranty ...

Lifting height: 112 mm
Pressure: 8 bar - 10 bar
Weight : 16.5 kg

Pneumatically controlled jacks consisting of a highly resistant diaphragm and internal telescopic guide. These jacks are fitted with a limit stop device as well as a safety valve making them absolutely ...

... a skidding beam and strandjacks, heavy offshore platforms can be transferred from or onto barges. • DISCOVER OUR STRAND JACKS - Hydraulic jacking device using steel wire - For vertical lifting - Or horizontal pulling ...

Lifting height: 210 mm - 300 mm
Pressure: 8 bar

• Lifting crosspiece for cars and vans. • Low profile when closed to lift low profile vehicles. • Mechanical parking bracket to guarantee the maximum safety. • Maximum pressure valve to avoid loads exceeding the nominal capacity. • ...

Lifting height: 1,870 mm - 2,100 mm
Height: 850 mm - 1,250 mm
Weight : 27 kg - 135 kg

Hydraulic gear box and transmission jacks Pedal pump Chromium plated piston rod Proportional “dead man” descent control Castor wheels

Lifting height: 13.5, 12, 10.3 in
Height: 7 in
Stroke: 3.75, 3.38, 3.13 in

■ All the quality, features and lifting capacity of the standard jacks in short form. The 12 ton and 20 ton models feature screw extensions for added versatility. ■ All jacks operate both vertically ...

- enclosed housing with fixed rack - lifting claw capable for 100% rated load - with load pressure brake - available with safety crank or with ratchet safety crank - capacity W.L.L: 1.500 -10.000 kg

Lightweight 1.3 ton trolley jack Very light aluminium jack Ideal for break-down service Short 2 piece handle bar Equipped with carrying handle Fast stroke: with only 11 pump strokes up to the max. ...

Lifting height: 75 mm - 305 mm
Weight : 3.6 kg - 64.9 kg

... hydraulic jacks is very simple. Jacks are supplied ready for use, i.e. including hydraulic oil, operating lever and, where applicable, carrying handle and lifting claw. Aluminium jacks ...

Stroke: 22.3 cm
Pressure: 499 bar
Weight : 19.5 kg

Stanley’s self-contained hydraulic track jacks are proven tough with impressive power-to-weight ratios and lifting capacity. Features: Integrated pump/carry handle increases tool durability and improves ergonomics. ...

Lifting height: 175 mm

Aluminium mechanical jack, fitted with an aluminium body to reduce the weight. Special sliding pads are used instead of ball bearings. All jacks must be handled with care and are suitable for higher place ...

Lifting height: 1,500 mm

The lifting jacks DH-AB.100 are designed to optimize the efficiency in your commercial vehicle workshop and to enhance the comfort and safety of the mechanics working on the vehicles. In the tail lift industry, they can ...

Lifting height: 3.4, 5.1, 5.9, 6.3 in
Height: 3, 5, 6 in
Weight : 4.2, 5.3, 12.1, 17.6 lb

... SIDEWINDER MINI JACK FITS IN YOUR PALM AND DELIVERS 5, 10 & 20 TONS OF LIFTING FORCE. ■ Retracted height of just 63,5 mm for the smallest jack and 130,2 mm for the 20 ton, allows you to slip this ...

ST-HBT-11 Hydraulic A-frame Lifting Trolley is small, robust and powerful. Due to its loading capacity of 3000kg, the trolley can transport A-frame weighing up to 5000kg. Safe lifting and lowering operations can be performed with this ...

Lifting height: 350, 300 mm

The Rack Jack is manufactured by Carl Stahl, and is a manual lifting in accordance to DIN and factory standard with lifting housing and fixed claw. There is a spur wheel gear constructed from high-grade tempered steel ...

Trailer supports provide safety for uncoupled semi-trailers during loading/unloading operations.

Lifting height: 140 mm - 445 mm
Pressure: 6 bar - 9 bar

compressed air supported system for easy lifting super fast in operation and almost maintenance free 2 lifting balloons version highly resistant and stable balloons made of multilayer material perfect for tire ...