Lever valves

DN: 25, 50, 16, 40 mm
Pressure: 4.5 bar - 7 bar
Temperature: 100, 80, 50 °C

The low-priced mini vacuum gate valve is well suited for industrial and R&D applications. It is often used in pipings of industrial systems.

DN: 0.5 in - 0.75 in
Pressure: 172 bar - 207 bar

... Adjustable flow control valve. AFD series Applications Dependably adjust and maintain a constant flow downstream from the valve with Cross flow control valves. Using the lever ...

DN: 76, 92 mm
Pressure: 2.8 bar
Temperature: 125 °C

... ignition will not work. The engine will overspeed, leading to mechanical failure or explosion. The 4260 Air Intake Shut-off Valves effectively shuts down a runaway diesel by closing off engine intake air. Features ...

DN: 0.25 in

... digital readout in the handle allows qualified technicians to easily adjust the valve to achieve a highly accurate flow. Valve pressure drop can be read through the valves integrated ...

DN: 25 mm - 150 mm
Pressure: 0 bar - 100 bar
Temperature: -20 °C - 60 °C

... off the flow of gas as the pressure increases or decreases below the affixed rate. The sleeve type valve does not need outer bypass in opening the valve. It has various Pressure Equipment Directive 97/23/EC ...

DN: 0.5 in - 2 in

Series B6080, B6081 2-Piece, Full Port, Bronze Ball Valves are used in commercial and industrial applications for a full range of liquids and gases. It features virgin PTFE seats and seals. The B6080, B6081's full port ...

These AWH butterfly valves are synonymous with quality, reliability and high hygiene standards. Supplemented with a comprehensive range of accessories, these valves therefore offer the ideal solution ...

DN: 8 mm - 80 mm
Pressure: 64 bar

Investment casting, hexagon, reduced bore, with lever. Parallel BSP thread to DIN/ISO 228 Housing and ball made of 1.4408. Sealing material PTFE, for screw pin to DIN 3852 Part 2 Form A. We reserve the right to alter dimensions.

DN: 10 mm - 100 mm
Pressure: 16, 10 bar

• Threaded seal-carrier for upstream maintenance without emptying the system. • Handle built-in tool for easy adjustment of the threaded seal-carrier (and ball torque). • “Antiblock” system that avoids ball blockage. • 100% factory ...

DN: 1 in - 2.5 in
Pressure: 70, 100 bar
Flow rate: 80, 1,600 l/min

Characteristics Type AA - Female Threads Type ED - Swivel Nut TypsizeQ max.P max. B31½”/2”800 l/min (211 US gpm)100 bar (1450 psi) B52½”1600 l/min (423 US gpm)70 bar (1015 psi) Connection possibility: - 1”, 1¼", 1½", 2" and 2½" - ...

DN: 4 mm - 38 mm
Pressure: 350, 400, 500 bar
Temperature: -20 °C - 80 °C

Connection 1 + 2 BSP cylindrical internal threads Sealing form 1 + 2 for screw-in pins with shapes A, B and if necessary E Note Bitte die Bedienungsanleitung für Kugelhähne beachten. Bitte die zul. Druckangaben ...

Pressure: 30 psi - 150 psi

Walchem’s Multi-Function Valves (MFV) provide anti-syphon, back pressure, bleed, drain and pressure relief for your 11, 16 and 21 size E class metering pumps. These valves will prevent syphoning when ...

DN: 40 mm - 125 mm
Pressure: 6, 16 bar
Temperature: -20 °C - 80 °C

The asa butterfly valve with SAE and DIN flange connections allows the combination with an elastic element (rubber compensator expansion joint) to make a short compensating and economical connection with the pump port. ...

DN: 0.15 in - 1 in
Pressure: 10 bar
Temperature: 93 °C

Combines three valves in one: Isolation Valve, Check Valve and Companion Flange Free floating flange allows easy alignment and installation of pumps Prevents gravity circulation Isolates ...

DN: 80 mm
Pressure: 10 bar
Temperature: -40 °C - 180 °C

Features •Maximum mounting flexibility •Superior corrosion resistance •Extended lifetime •Minimized operating costs Specifications •Design - ISO/DIN •Nominal Pressure = 10 bar •Disc Lining = PFA •Body Lining = PTFE ...

DN: 0.25 in - 2 in
Pressure: 27.5 bar

These ball valves are 2-way floating ball type. They Provide quick, reliable and easy on/off control for manual release, isolating valves and drains.

DN: 15 mm - 50 mm
Pressure: 100 bar
Temperature: -20 °C - 100 °C

industry, high temperature, high pressure PRESSURE PFA/PS in bar BALL : stainless steel 316 - SEALS : PTFE SPECIAL : ISO EN 5211 top connection, actuation possible

DN: 0.375 in

Ball valve • Very suitable for quick shut-off valve (open-close) • Can be operated under maximum pressure • Connection: 3/8" NPT female (2x)

DN: 4 mm
Pressure: 500 bar

... SAE J 514 (UN/UNF), ISO 8434-3 (ORFS), DIN 2353/ISO 8434-1 (24° taper, light and heavy series) Ball Valve Mild Steel, zinc/iron-plated 3-way Ball Valves 24° 06L

DN: 40 mm - 300 mm
Pressure: 10, 16 bar
Temperature: -15 °C - 130 °C

... Contact sealing Heat EPDM Disc material Ductile iron GGG50 coated Connection between flanges Operating system Lever

DN: 0.5 in - 2 in
Pressure: 25, 16 bar
Temperature: -5 °C - 90 °C

... temporarily dunng 1 hour max ) • - Max Pressure Ps ( excepted drain valves types ) : 40 bars up to DN 3/4*, 25 bars from 1“ to 1*1/4.16 bars over • - Max pressure Ps for drain valves types : 25 bars ...

DN: 12 mm

This is the LBS-PN 64 series of ball valves from FG Inox. It is engineered from an AISI 316 stainless steel and is made with a female threading type on both ends. The series comes in 8 variants that have diameters ranging ...

DN: 1 in - 4 in

... Ball type Flush Bottom Tank Valves are used for discharging of material from reactor vessels and tanks. Our Ball type Flush Bottom Tank Valves are available in full bore, reduced bore, manual & actuated ...

DN: 8 mm - 50 mm
Pressure: 138 bar
Temperature: -20 °C - 160 °C

Barstock ball valve monobloc type class 800 in stainless steel A479 316/316L, full bore, F/F ISO 7/1 threading or F/F NPT, Fire safe, Antistatic device.

DN: 0.5 in - 4 in
Pressure: 20 bar
Temperature: 0 °C - 200 °C

Stainless steel ball valve Elephant BV.CF.Fp.316.200 290 psi, full port, compact flanged connection Class 150, with ISO 5211 mounting pad and handle is used as shut-off valves in water supply systems, ...