Lever valves

DN: 50 mm - 1,400 mm
Pressure: 16 bar

Rubberlined EVS Short pattern, from DN 50 with centring lugs Construction - Concentric butterfly valve with bonded vulcanised rubber linings Body type - Wafer type End connection - EN 1092 PN 6, 10 and 16 ASME ...

DN: 12.7 mm - 203.2 mm
Pressure: 1.6 MPa - 2.5 MPa
Temperature: 0 °F - 366 °F

China Wafer Pattern Ball Valve Manufacturer Shinjo Supplies Wafer Pattern Ball Valve

DN: 6 mm - 100 mm
Pressure: 14, 16, 18, 40 bar

* Ball valve made of brass * Full port design * Female threaded acc. to DIN ISO 228 * Lever Handle (red) * Marking according to DIN EN 19 * Blow-out proof stem with double O-ring ...

DN: 20 mm
Pressure: 1 bar - 38 bar
Temperature: -196 °C - 120 °C

... Divertor Valves are constructed from stainless steel and has brass-made inner parts. This valve is approved for operating in air gases, vapors and cryogenic liquefied gases. It also uses a PN50 flange ...

DN: 0.25 in - 4 in
Pressure: 40, 32, 25 bar
Temperature: -10 °C - 120 °C

• Full bore • Body, ball and socket hot stamped chrome plated brass OT58 • PTFE seats - O ring EPDM • Handle and nut chrome plated steel • Double o-ring stem anti leakage technology • Chrome plated stem with nut • ISO228 threadings • ...

DN: 50 mm - 250 mm
Pressure: 16, 19 bar
Temperature: -10 °C - 150 °C

GAS VALVES BF 32 BF32 butterfly valves are interception devices for average/low pressure gas pipelines. They may be used also for intercepting liquids when a hermetic seal, low pressure losses and ...

DN: 50 mm - 200 mm
Pressure: 10 bar - 16 bar
Temperature: 70 °C

optimised body design with guided float to ensure maximal protection of the bleeding and venting device | large bleeding or ventilation quantities owing to ventilation cross sections and connection flange dimensions of the same size | ...

DN: 0.25 in - 2 in

... BSP-Parallel FlowFull ConnectionsFxF ApplicationIndustry Stem configurationPacking Gland HandleLever BodyBrass ProductBall Valve Size 1/4" - 2'

Top Line Ball Valves are engineered to be the finest in the industry. Each valve is built to exacting specifications and is constructed to perform flawlessly in the most hostile environment. Top Line’s ...

DN: 15 mm - 600 mm

... meet ASME B16.10 long pattern. ● Gear actuator standard on 8–24"" (200–600 mm) SB-150/300 and 6 –12"" (150–300 mm) SB-600 valves. ● Memoryseal seats compensate automatically for wear and fluctuations of pressure and ...

DN: 20 mm - 50 mm

Sanitary Grade Threaded Butterfly valves Operating Principle Technical Parameter Installing Dimension Documents Downloads 1.Product Desciption: Specs: DN20-150，1″-6″ Standard：DIN、SMS、ISO Material：SUS304、SUS316L Application：beer ...

DN: 15 mm - 100 mm
Temperature: -20 °C - 300 °C

... Model NO.: Q41F Connection Form: Flange Nominal Pressure: 150lb to 2500lb Structure: Floating Ball Valve Function: Blow-Down Valve Application: Industrial Usage, Water Industrial Usage Class: ...

DN: 20 mm - 25 mm
Pressure: 13 bar
Temperature: -30 °C - 80 °C

... quickl valve can be installed in the piping and some important position such as outlet of compressor and upstream of pneumatic tools .Good for the separation ,adjustment and maintenance . Quick install . Provide ...

DN: 20 mm - 100 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 150 °C

Series B1 consists of wafer-ball-type shut-off valves, with the body in cast iron and a floating ball, manufactured in accordance with the severe product standards and the quality management of ISO 9001. Suitable for ...

DN: 1.5 in
Pressure: 16 bar
Temperature: -40 °C - 250 °C

The Perolo ND40 ATCO FULL BORE self-contained ball valve is designed to be used as an air inlet or as a fluid inlet/outlet valve. With its MAWP of 16 bars, this valve exceeds T22 requirements ...

Pressure: -1 bar - 20 bar
Temperature: -20 °C - 80 °C

Mini ball valves - 5600 series Areas of application : compressed air, oil, water Technical features - chrome-nickel plated brass body - ball sealings : PTFE - nylon 66 handle - oil-proof rubber packings NBR ...

DN: 15 mm - 50 mm
Pressure: 5, 0.5 bar
Temperature: -20 °C - 600 °C

DN: 15 mm - 150 mm
Pressure: 16 bar
Temperature: -40 °C - 150 °C

... resistant control valve, the valve body and the inner part of the whole lining of fluorine structure, effectively blocking the corrosion of the valve in the medium of corrosion of metal ...

DN: 15 mm - 300 mm
Pressure: 150, 300 psi

... of MNC 3 & 4 Way Ball Valve. This Ball Valve is available in sizes that range from 15 MM to 300 MM. Sturdy constructions, long service life, fine finishing are some of the main factors of our 3 & 4 Way ...

DN: 15 mm - 65 mm
Pressure: 1.6 MPa - 6.4 MPa
Temperature: -196 °C - 80 °C

Cryogenic Ball Valve Body: SS304, CF8 Bonnet: O6Cr19Ni10 Stem: O6Cr19Ni10 Seal Ring: PTFE Suitable Media: LO2,LN2,LAr,LNG,etc

DN: 12.7 mm - 203.2 mm

... Series is a two piece, full port, flanged end ball valve with an ISO 5211 compliant direct mount actuation pad. The 10E10 is available in sizes ranging from ½” to 8” with ASME Class 150 flanges. Valve ...

DN: 15 mm - 50 mm

Pennant ball valves have been designed for long life, economy, ease of operation and, above all, safety. The design offers safety features because it does not allow the seal to get squeezed and break due to line pressure ...

DN: 25 mm - 200 mm
Temperature: -200 °C - 600 °C

Neles series X modular ball valve, incorporates robust stem to ball connection in seat supported models. Application based seat selection assures valves are capable of delivering long lasting tightness. ...

DN: 100 mm

Multi-way ball valves from Böhmer, with three or four passages up to DN 100, are versatile in the truest sense of the word. Our valves are used for a variety of purposes. In shipping, for example, ...

DN: 25 mm - 32 mm
Pressure: 12 Pa

Description • The test and drain valve is a combined two position lever operated ball valve, sight glass and stop valve. • They incorporate a nominal bore drain valve ...