Stroke : 900, 600, 300, 150, 1,200 mm
Force: 89, 44, 22, 178 kN
Speed: 875, 1,000, 583, 1,500 mm/s
... flange mount motor (ASSIGN) • Long linear actuator – up to 48” (1200 mm) FTX Series high force electric linear actuators, the perfect hydraulic actuator ...
EXLAR
Translation-rotation unit •Adjustable speed •Simple and accurate positioning •Compact •Simple installation •Light
Stroke : 35 mm - 3,754 mm
Force: 420 N - 1,000 N
Torque: 0.1 Nm
Spindle, toothed belt or direct drives with metal strip cover The linear actuators with metal strip cover are an extension of the standard programme. The metal strip offers protection ...
Stroke : 14 mm - 271 mm
Force: 6 N - 92 N
Speed: 5.6 m/s
THE ST SERIES IS NOTABLE FOR: » Tubular linear motor » 3 phase technology » Actuator, components and module » High power density » High efficiency » Highly dynamic acceleration » Very long life-time » ...
Dunkermotoren GmbH
Stroke : 27 mm - 309 mm
Force: 51 N - 780 N
Speed: 5.9 m/s
The ServoTube Actuator is an optimal solution for industrial position control. Faster than a ballscrew with the clean reliability of a linear forcer. ServoTube is a cost-effective alternative to air cylinders ...
Dunkermotoren GmbH
Stroke : 33 mm - 318 mm
Force: 137 N - 1,860 N
Speed: 5.3 m/s
THE ST SERIES IS NOTABLE FOR: » Tubular linear motor » 3 phase technology » Actuator, components and module » High power density » High efficiency » Highly dynamic acceleration » Very long life-time » ...
Dunkermotoren GmbH
Stroke : 0 mm - 950 mm
Force: 10, 20, 30, 40 kN
Speed: 130 mm/min
... Operations: An dc electric motor drives via a gear a spindle. A stainless steel piston rod runs the linear move. To avoid a mechanical collision at the end positions of the actuator, ...
Force: 156 N - 2,313 N
The MXE-S electric linear screw actuator with a solid bearing design reduces stress concentration for optimal performance. The MXE-S electric linear ...
Tolomatic, TOL-O-MATIC
Metso’s Neles linear actuators designed for linear valves. VD diaphragm actuators provide the safe and reliable operation and is well suited for most of the control applications. ...
Metso Automation
Stroke : 100 mm - 200 mm
Force: 300 N - 600 N
L4.202 Linear actuators RA 60 K L4.202 Linear actuators RA 60 K max. lifting force 300 to 600 N stroke from 100 to 200 mm version with limit switches or stroke measuring ...
Stroke : 100 mm - 600 mm
Force: 1,000 N - 6,000 N
Speed: 0.01 m/s - 0.04 m/s
max. lifting force 1000 to 6000 N stroke from 100 to 600 mm version with limit switches or stroke measuring system
Stroke : 80 mm - 250 mm
Force: 4.5 kN - 12.5 kN
Speed: 0.03 m/s
L7.101 Linear actuators RH 1250 L7.101 Linear actuators RH 1250 max. lifting force 4.5 to 12.5 kN stroke from 840 to 250 mm manual-hydraulic version pump strokes ...
Stroke : 15 mm - 1,000 mm
Force: 10,000 N
Speed: 156 mm/s
The LD1000C linear actuator is ideal for the digitalization and control of vehicles, machines and building sections. It is extraordinarily robust and strong: The thrust force is up to 10,000 N and the ...
Stroke : 15 mm - 1,000 mm
Force: 10,000 N
Speed: 130 mm/s
... your desired color. The high quality and resistant linear actuator The LD1000E has a robust housing made of die-cast aluminium with a stable casing made of anodized aluminium profile and a lift ...
Stroke : 100 mm - 600 mm
Force: 6,000, 4,000 N
Speed: 0 m/s - 0.02 m/s
Intelligent linear actuator with high force The LD600 linear actuator is a very smart and powerful actuator that has been specially designed for indoor ...
Stroke : 12, 24 mm
Motorized Actuators (GCM-6101) are offered with varying travel by a stepping motor. They have compact structure and stable operation. They can provide precise positioning accuracy and be used with GCM-T series high-precision ...
Rod diameter: 8 mm - 50 mm
Force: 67 N - 889 N
Speed: max 1750.0 mm/s
... . Whenever possible, the load weight on the Roh’Lix linear actuator should be supported by a separate linear bearing assembly. Learn More about the Roh’Lix Linear Actuator Roh’Lix ...
Force: 20 N
Speed: 0.3 mm/s - 100 mm/s
The size 6 [14mm] hybrid linear actuator occupies a mounting footprint of 14mm square but provides over 20N of continuous thrust force. Size 6 hybrid stepper linear actuator ...
Jiangsu DINGS' Intelligent Control Technology Co.,
Stroke : 20 mm - 150 mm
... lead screw linear actuator and self-developed simple linear module, DLM 20mm series is compact and reliable structure of linear solution. DLM 20mm Series is good precision, ...
Jiangsu DINGS' Intelligent Control Technology Co.,
Stroke : 20 mm - 250 mm
... lead screw linear actuator and self-developed simple linear module, DLM 28mm series is compact and reliable structure of linear solution. DLM 28mm Series is good precision, ...
Jiangsu DINGS' Intelligent Control Technology Co.,
Force: 300 N - 1,390 N
Torque: 5.5, 2.5 Nm
Rod length: 500, 1,000, 300, 800 mm
... “light option” for simple manual adjustments Aluminium screw • Low-weight option thanks to aluminium screw and plastic slide bearin Screw cover •An elastic plastic sealing lip protects the screw Choice of guiding ...
RK Rose+Krieger GmbH
Stroke : 0.2 mm - 300 mm
Force: 8 N - 5,500 N
Torque: 1.5 Nm - 170 Nm
... screw with slide bearing (resistant to fine dust/abrasions) Covers •Slot cover, as dust protection or stroke limitation Carriages/fixing elements •Wide range of models facilitates connection to your designs •Option ...
RK Rose+Krieger GmbH
Stroke : 0.2 mm - 300 mm
Force: 100 N - 14,000 N
Torque: 20 Nm - 1,100 Nm
... motor-driven adjustments Screw with choice of slide bearing or ball bearing •Ideal for use in environments with fine dust/abraded particles due to slide bearings Carriages available with Optional ...
RK Rose+Krieger GmbH
Force: 3,400, 22,600, 14,400 N
Torque: 898.35, 428.4, 67.15 Nm
Speed: 3 m/s
... for his installation in the miniature world at Times Square, because of their public traffic. Our engineers chose a lifgo® linear 5.0 with helical gearing, as it took a very long distance that needed to be covered. The ...
Stroke : 305 mm
Force: 67 N
Torque: 1.7 Nm
... Performance in an Ultra-Compact 2-axis Design. Designed for easy integration in OEM assemblies, the Haydon Kerk Z-Theta offers linear + rotary point to point motion in an compact footprint. Unlike in-house component-up ...
Haydon Kerk Pittman
Stroke : 9 mm - 200 mm
Force: 2 N - 45 N
... Size 8 by Haydon Kerk Motion Solutions is a 21mm stepper motor linear actuator. Size 8, 21000 series linear actuators are available in three designs - captive, non-captive ...
Haydon Kerk Pittman
Stroke : 12.7 mm - 250 mm
Force: 15 N - 90 N
... Size 11 by Haydon Kerk Motion Solutions is a 28mm stepper motor linear actuator. Size 11, 28000 series linear actuators are available in three designs - captive, non-captive ...
Haydon Kerk Pittman
Stroke : 25, 35, 50 mm
Force: 140 N
Speed: 0.01, 0.01 m/s
... sector in general where robustness and high reliability over time is required even in harsh environments. This type of linear actuator differs from many others in its particular robustness, which is suitable ...
System di Rosati S.r.l.
Stroke : 44, 29 mm
Force: 140 N
Speed: 0.01 m/s
... PE40-25GE stroke = 44mm Max. force = 140N Translation speed (type A) = 5.8 mm/sec (no load) Translation speed (type B) = 11.6 mm/sec (no load) Double direction of travel Built-in FEED-BACK for ...
System di Rosati S.r.l.
Force: 300 N
Speed: 0.04, 0.07 m/s
Ambient temperature: -5 °C - 60 °C
... sector in general where robustness and high reliability over time is required even in harsh environments. This type of linear actuator differs from many others in its particular robustness, which is suitable ...
System di Rosati S.r.l.
Stroke : 835 mm - 4,900 mm
Force: 3.1 kN - 402 kN
Motor power: 0 W - 15,000 W
... marine, communications and food processing. Rolaram linear actuators not only match the load capacity of hydraulic cylinders and exceed the load capacity of of conventional electro- mechanical actuators ...
Stroke : 1,830 mm
Force: 450, 320 N
Torque: 5.6, 11.3 Nm
... Motor or screw brakes • Magnetic home and limit sensors • Single or dual carriages • Belt or helical gear, parallel or inline direct transmission • Water resistance protection
Kollmorgen Europe GmbH
Stroke : 25 mm
Force: 150 N
Speed: 600 mm/min
DL15 Series Linear Actuators Family: DL15 Series Linear Actuators Model: DL15-25-SV Price: $ 540.00
DELTRON
Stroke : 75 mm
Force: 150 N
Speed: 600 mm/min
DL15 Series Linear Actuators Family: DL15 Series Linear Actuators Model: DL15-DW-75-SV-PH Price: $ 938.00
DELTRON
Stroke : 75 mm
Force: 150 N
Speed: 600 mm/min
DL15 Series Linear Actuators Family: DL15 Series Linear Actuators Model: DL15-75-ST-C-PX Price: $ 752.00
DELTRON
Stroke : 50 mm - 400 mm
Force: 3,000, 4,000, 6,000 N
Speed: 4 mm/s - 21 mm/s
... dimensions with different weight） • Static bending moment: lateral loads are not allowed. JC35L30 is a durable yet quiet actuator. It has rich specifications and can be used to both push and pull applications. JC35L30 ...
Zhejiang Jiecang Linear Motion Technology Co., Ltd.
Stroke : 50 mm - 400 mm
Force: 8,000, 10,000 N
Speed: 4 mm/s - 10 mm/s
... : gray IP grade: Max. IPX6 Stroke length: Patient lift version: 50-400mm(in steps of 4mm) Standard version: 50-250mm (in steps of 4mm) • Installation dimensions: Patient lift version： L=S+260（50≤S≤300，with ...
Zhejiang Jiecang Linear Motion Technology Co., Ltd.
Stroke : 50 mm - 300 mm
Force: 6,000 N
Speed: 4.5 mm/s - 9 mm/s
... anti-pitch option • Built-in electric limit switch • Weight:2.8kg(based different stroke) • Static bending load: no bending load JC35L23-QR is a compact and powerful actuator. It enables JIECANG to ...
Zhejiang Jiecang Linear Motion Technology Co., Ltd.
Stroke : 10 mm
Force: 29.5 N
Motor power: 20 W
AQUARIUS is an actuator designed for applications where force, throughput, durability and reliability are required – all in a compact form factor. It is ideal for applications that require an independent Z-axis for testing ...
ETEL S.A.
Stroke : 10 mm
Force: 31.4 N
Motor power: 20 W
AQUARIUS ST is the latest generation of our short stroke actuators specifically designed for “Test & Scan” turret applications. This series offers improved force control repeatability and higher throughput, which ultimately ...
ETEL S.A.
Stroke : 10 mm
Force: 11.5 N
Motor power: 12.4 W
Introducing TUCANA, an actuator that fulfils the requirements of applications that demand force, throughput, durability and reliability, all in a compact form factor. It is particularly suitable for independent Z-axes ...
ETEL S.A.
Stroke : 20 mm - 260 mm
Force: 1.5 kN - 200 kN
Speed: 2 mm/s - 40 mm/s
The Reineke RKA electro hydraulic actuator is a self contained actuators type. All relevant components as motor-pump unit, piston, servo valve or proportional control valve and mechanical ...
Stroke : 100 mm - 1,050 mm
Force: 75, 85, 150, 300 N
Speed: 250, 500, 800, 1,000 mm/s
Automation Series linear motorized modules integrate recirculating ball bearing system with a precision ball screw in a compact frame that meets the speed and precision requirements of modern production machinery. The ...
IntelLiDrives, Inc.
Stroke : 100 mm - 2,000 mm
Speed: 0.6, 0.2 m/s
Automation Series linear motorized modules integrate recirculating ball bearing system with a precision ball screw in a compact frame that meets the speed and precision requirements of modern production machinery. The ...
IntelLiDrives, Inc.
Stroke : 150 mm
Low profile motorized actuators with precision ball screw provide exceptional accuracy, repeatability and ultra-fine positioning resolution capability to 1 micron in a very compact, low profile unit. They are ideal for ...
IntelLiDrives, Inc.
Stroke : 50 mm - 500 mm
Force: 1,500, 2,500, 4,000 N
Speed: 5, 10, 20 mm/s
Designed and manufactured in Sweden, the Gammadrive actuator is the optimal choice for light industrial and furniture applications. With the small motor housing and the multiple mounting options to choose from, Gammadrive ...
Pressure: 3 bar - 8 bar
Torque: 8 Nm - 10,000 Nm
Rotation angle: 0 ° - 180 °
3 position pneumatic actuator is an actuator of special specification, which can provide 0°-180° three-position operation modes.The intermidiate position is operated through mechanical braking of two ...
Pressure: 2 bar - 8 bar
Torque: 5 Nm - 13,187 Nm
Rotation angle: 0 ° - 90 °
The JHA series low-temperature pneumatic actuator uses a complete set of special material internal parts that can adapt to low-temperature environments, enabling it to maintain excellent performance in some low-temperature ...
Pressure: 3 bar - 8 bar
Torque: 1 Nm - 1,600 Nm
Rotation angle: 0 ° - 90 °
... temperature: Standard 3.Product Features Double acting stainless steel pneumatic actuator have the below characteristics: ●Structure: compact rack and pinion pneumatic actuator. ●Used for angular ...
Please specify:
Help us improve:
remaining