Linear actuators

Pressure: 2 bar - 8 bar
Torque: 5 Nm - 13,187 Nm
Rotation angle: 0 ° - 90 °

High-torque pneumatic actuator is a pneumatic actuator powered by compressed air, driven by the linear motion of the piston rack and pinion to the gear drive of the ...

Pressure: 2 bar - 8 bar
Torque: 5 Nm - 13,187 Nm
Rotation angle: 0 ° - 90 °

Maintenance-free pneumatic actuator is a pneumatic actuator powered by compressed air, driven by the linear motion of the piston rack and pinion to the gear drive of ...

Pressure: 3 bar - 8 bar
Torque: 8 Nm - 10,000 Nm
Rotation angle: 0 ° - 180 °

3 position pneumatic actuator is an actuator of special specification, which can provide 0°-180° three-position operation modes.The intermidiate position is operated through mechanical braking of two ...

Stroke : 10 mm
Force: 29, 11.5 N
Speed: 1 m/s

This actuator, can be used in any applications where force, throughput, long lifetime and reliability are required within a small form factor. It typically fits with the requirement of independent Z axis for testing handlers. Main ...

Stroke : 10 mm
Force: 29.5, 120 N
Speed: 1 m/s

This actuator can be used in any applications where force, throughput, long lifetime and reliability are required within a small form factor. It typically fits with the requirement of independent Z axis for testing handlers. Main ...

Stroke : 10 mm
Force: 200 N
Speed: 0 m/s - 1 m/s

The AQUARIUS ST is the new generation of ETEL’s short stroke actuators primarily dedicated to “Test & Scan” turret handler applications. Compared to its predecessor the AQUARIUS one, the ST series allows a higher force ...

Stroke : 100 mm

The pneumatic actuators are developed by Sirius Electric particularly suitable for automation and building of automatic lines. They come with slide movement carried out on high precision ...

Stroke : 0 mm - 100 mm

COMPACT 20 KHZ ACTUATOR for 20 kHz system particularly suited for incorporation on automatic lines.The movement occurs on precision prismatic guides with the use of a pneumatic cylinder with a diameter of 63 mm and stroke ...

Stroke : 0 mm - 100 mm

The USP- A is a unit manufactured by Sirius Electric. It is an electrical actuator applicable on automated assembly lines. It is an electric motor axis, particularly strong and without the use of compressed air, parameter ...

Stroke : 6, 20, 10 mm
Force: 2 kgf
Speed: 4 mm/s

Miniaturized AC servomotor linear actuators are a type of rectilinear actuator which achieves high precision positioning as well as miniaturization and weight reduction. The motor portion ...

Stroke : 10, 20, 6 mm
Force: 1.5 kgf
Speed: 4 mm/s

Miniaturized AC servomotor linear actuators are a type of rectilinear actuator which achieves high precision positioning as well as miniaturization and weight reduction. The motor portion ...

Stroke : 15, 10, 25 mm
Force: 6 kgf
Speed: 5 mm/s

Miniaturized AC servomotor linear actuators are a type of rectilinear actuator which achieves high precision positioning as well as miniaturization and weight reduction. The motor portion ...

Speed: 40 mm/s

AT series linear actuators This solution is generally adopted in highly compact machines including an unwind or rewind station. Assembly can be performed with frontal flange, foot or joints. Axial ...

Stroke : 13 mm - 38 mm
Force: 445 N

Stroke : 50 mm - 300 mm
Force: 1,600, 2,100 N
Speed: 20, 40, 2.7, 5 m/s

Actuator with Encoder: Actuator with Encoder, with 50 to 300 mm stroke, 2.7 to 40 mm/sec speed and load up to 1200 Nm, according to the supplied voltage which may be 12 o 24 V. It is suitable for all ...

Stroke : 50 mm - 300 mm
Force: 2,100, 1,600 N
Torque: 1,200 Nm

Actuator without Encoder: Actuator without Encoder with 50 to 300 mm stroke, 2.7 to 40 mm/sec speed and load up to 1200 Nm, according to the supplied voltage which may be 12 o 24 V. It is suitable ...

Stroke : 50 mm - 300 mm
Force: 1,600, 2,100 N
Torque: 1,200 Nm

... voltage which may be 12 o 24 V . Thanks to its telescopic worm screw, it is suitable for all actuation types requiring a linear movement. For more information, please refer to the technical data sheet where you ...

Stroke : 20 mm
Force: 25 N

... Protective Rating: IP54 Actuator housing Housing material: Black polyamid 30 % GF reinforced Application: Suitable for door latches, trunk lids and lift gates Design: Durable construction for long ...

Stroke : 50 mm - 500 mm
Force: 1,500, 2,500, 4,000 N
Speed: 5, 10, 20 mm/s

Designed and manufactured in Sweden, the Gammadrive actuator is the optimal choice for light industrial and furniture applications. With the small motor housing and the multiple mounting options to choose from, Gammadrive ...

Force: 450 N - 2,500 N
Speed: 5 mm/s - 110 mm/s
Ambient temperature: -10 °C - 60 °C

Three phase or single phase Motor CE Worm gearbox Acme lead screw or ballscrew (VRS) Chrome plated steel push rod Permanent grease lubrication IP 65, tested according to rule CEI EN 60529 - NB: only for brake motors standard IP54, IP65 ...

Force: 2.6 kN - 6 kN
Speed: 2.5 mm/s - 35 mm/s
Ambient temperature: -10 °C - 60 °C

Three phase or single phase Motor CE Worm gearbox Acme lead screw or ballscrew (VRS) Chrome plated steel push rod Permanent grease lubrication IP 65, tested according to rule CEI EN 60529 - NB: only for brake motors standard IP54, IP65 ...

Force: 0.6 kN - 10 kN
Speed: 3 mm/s - 100 mm/s
Ambient temperature: -10 °C - 60 °C

Three phase or single phase motor CE Worm gearbox Acme lead screw or ballscrew (VRS) Chrome plated steel push rod Permanent grease lubrication IP 65, tested according to rule CEI EN 60529 - NB: only for brake motors standard IP54, IP65 ...

Stroke : 100 mm - 700 mm
Force: 12,500 N - 55,650 N
Speed: 50 mm/s

Electromechanical linear actuators SEARD series are the natural EVOLUTION in the high added value market of the LUXURY YACHT, which is rapidly transforming itself by the means of new electromechanical ...

Stroke : 1 mm - 1,000 mm
Force: 1.7 kN - 100 kN
Motor power: 30 W - 3,000 W

Electric Linear Actuator featuring orthogonal-mounted motor, by the means of worm-screw/worm-wheel gear, for industrial application. 6 different sizes (ECO1, ECO2, ECO3, ECO25, ECO50, ...

Stroke : 1 mm - 2,000 mm
Force: 0.25 kN - 60 kN
Motor power: 70 W - 4,000 W

High efficiency Electric Linear Actuator, featuring in-line motorization (with or without precision planetary gearbox), suitable for industrial applications. 5 different sizes (ECU0, ...

Stroke : 12, 13 mm

Ton Capacity - 20/10 Piston area (cm2) - 28,3/15,2 Oil volume per stroke (cm3) - 54 Height (mm) A Min - 51 Height (mm) B Max. - 76 C (mm) - 49,3 D (mm) - 78 E Ø (mm) - 60/44 F Ø (mm) - 51/38 G Ø (mm) - 15 L ...

Stroke : 50 mm - 500 mm
Force: 6,000, 8,000 N
Speed: 3 mm/s - 8 mm/s

Features 1.Load thrust up to 8000N 2.Max. load pull 4000N 3.Color: Grey /Black 4.Max IP rating: IPX6W 5.24V DC permanent magnet motor 6.Stroke length:50-500mm(±2mm)8000N 7.Noise level≤48dB(ambient level≤35dB) 8.Safety nut: standard 9.Electrical ...

Stroke : 0 mm - 400 mm
Force: 0 N - 8,000 N
Speed: 6 mm/s - 10 mm/s

Features: 1.Thrust up to 8000N 2.Color: light gray or black 3.Manual lowering: red 4.IP rating: IP66 5.Input voltage: 24VDC/29VDC 6.Stroke length: 0-400mm(±2mm) 7.Retracted length: L=S+260 (S＜300)， L=S+290(300≤S≤400) 8.Noise ...

Stroke : 50 mm - 500 mm
Force: 0 N - 6,000 N
Speed: 3.9, 5.9 mm/s

Features: 1.Load thrust up to 6000N 2.Max. load pull 4000N 3.24V DC permanent magnet motor 4.IP Grade:Max.IPX6 5.color: Black/Grey 6.Noise levelc≤48dB (ambient level≤40dB) 7.Electrical limit switches : built-in 8.Safety Nut 9.Short ...