Liquid filters

Filtration size: 80 µm
Flow: 5 m³/h - 200 m³/h

... the industries are using filtering devices within their production units in order to perform different operations (clarification, extraction, equipment protection). E2SE designs and manufactures static and self-cleaning ...

Filtration size: 40 µm - 1,905 µm

TOP-FLO® in-line stainless steel filters and strainers are specifically designed for the removal of unwanted particles from process line content providing added protection and longer service life for pumps, valves, heat ...

Flow: 4 m³/h - 70 m³/h

Pressure filters for final suspended solids, odours, colour and metals removal. The pressure filters (with sand, activated carbon, zeolite or other filtering media) assure a high quality ...

Filtration size: 20 µm - 80 µm
Flow: 50 l/min
Fluid temperature: 20 °C - 60 °C

... requirement a deep bed band filter can be added with a magnetic filter for fine filtration of magnetic particles, smaller than the mesh size of the filter media. A BELKI Deep Bed Band ...

Operating pressure: 0 bar - 40 bar
Fluid temperature: -20 °C - 200 °C

The filters in series 10.000 are threaded Y filters, with a body made of CF8M stainless steel, which are manufactured in accordance with severe product norms. They are a prerequisite for protecting pumps, ...

Operating pressure: 10 bar
Flow: 48 m³/h - 192 m³/h

Applications The RSL disk filter station is composed of two or more Rotodisk filters, a filter equipped with a particular mechanical and hydraulic system that allows its automatic backwashing. ...

Pumps, control valves, traps or any other equipment controlling the flow of liquids or gases require proper protection with strainers for trouble-free operation. Sterlco® strainers are engineered for water or steam, and ...

... request. Brief introduction of multilayer sintered mesh filter： The multi-layer sintered mesh filter plate is divided into integral type and split type. The so-called integral type is a kind of filter ...

Flow: 120 l/min - 1,500 l/min

... parts. • Increased life of liquids. • Reduced tool wear. • Slower Fouling millstones. • Consistent quality of Filtration. • Reducing maintenance costs. • Reduced Footprint compared to a flat filter OPERATING The ...

Operating pressure: 10 bar
Filtration size: 0.25 µm - 0.5 µm
Flow: 20 m³/h - 40 m³/h

... bottom -draws the liquid into filter barrel through the pressure from pipe -the liquid media is filter bags (stainless sheet with holes support filter ...

Operating pressure: 0 bar - 25 bar
Filtration size: 100, 300 µm
Fluid temperature: 0 °C - 110 °C

Compact self-cleanig filter with front gauge socket, double threadings 1/2" & 3/4", available both with 100 micron mesh or 300 micron mesh Available sizes: 1/2" and 3/4" simultaneusly

Specifications Material - Metal Thickness - 0-5mm Mesh Size - 10-100cm Application - Liquid Use Color - Blue Feature - Corrosion Resistance, Dimensional, Durable, Hardend & Temper Surface Finishing - Polished Get ...

Operating pressure: 1.5 bar - 10 bar
Filtration size: 25 µm
Flow: 6,500 l/h - 30,000 l/h

- Very high-flow filters with cyclonic effect centrifugal pre-filtration. - Polypropylene filter body. - Flexible 25 micron polypropylene mesh filter. - Maximum pressure: 16 bars (bursting: ...

Filtration size: 50, 100, 5, 20 µm
Flow: 3.7, 4, 2.8 m³/h

... through the filter element and to the pure water outlet. Depending on the filter element, foreign particles the size of > 5 µm, 20 µm, 50 µm, 100 µm (DVGW version) are thus retained. Our ...

FILTER DESCRIPTION The traditional Fan-Coil filter has the filter media is supported by a coated rigid rod frame. There are three versions available: 1. Sythhetic G2/G3 material approximately ...

Operating pressure: 2 bar - 10 bar
Filtration size: 10 µm - 1,000 µm
Flow: 95 m³/h - 1,800 m³/h

Backflushing filter with three separate chambers (coarse filtration, actual filtration, dirt chamber) and filter screens with a fineness of 10 - 1000 µm. Timed fully automatic self-cleaning mechanism ...

Filtering a wide array of liquids Protection from obstruction for nozzles and other components In-line calibrated head loss In-line filters for any application Easy to install Available ...

Operating pressure: 0 bar - 25 bar
Filtration size: 20 µm - 2,000 µm
Flow: 50, 40, 55, 70, 100 m³/h

... Powder Cotaing Paint MaterialEpoxy Polyester The filter body is St-37 or stainless-steel optionality The filtering in pressured lines High performance during the back washing Extensive Filtering ...

... the KBF filter. In this case the filtering is performed not with paper but with a continuous fabric belt made of plastic. Basically the CBF filter works by the KBF principle, i.e. with ...

Operating pressure: 5 bar
Filtration size: 1 µm - 500 µm
Flow: 8 m³/h

... optimum cleaning efficiency with low water use. The cleaning system is triggered by measuring pressure difference between upstream and downstream; the cleaning frequencies therefore automatically adapt depending on the ...

Filtration size: 1 mm

Y-strainer in stainless steel with threaded ends. Insert in stainless steel.

Body Material:UPVC Screen:UPVC O-Ring:EPDM,VITON Size: DN15(1/2")~DN100(4") Standard: JIS,ANSI,DIN

Operating pressure: 87 psi
Filtration size: 13, 30 mm
Fluid temperature: 100 °C

Sterile Diamond® PureFlow™ syringe filters satisfy requirements of life science applications for sterilization of solutions or clarification of biological fluids. Sterile filters include a polypropylene ...

Operating pressure: 20, 80 psi
Filtration size: 1 µm
Flow: 0 us gal/min - 1.1 us gal/min

... and is cost effective. The filter has been tested in order to meet specific regulations related to the use of carbon as detailed in ANSI/AMMI/ISO 23500, specifically Annex F & G. The design includes 2 carbon block filters ...

... the maintenance of the filter system is required to ensure a proper function. DWA offers solutions in all areas of the mechanical filtration functions which can be found in water treatment: Pre-filtration ...