Liquid flow meters

Volumetric flow rate: 0 l/min - 700 l/min
Process temperature: -60 °C - 210 °C
Process pressure: 0 bar - 400 bar

Consisting of two high-precision gears, the measuring unit is driven by the liquid flow based on the displacement principle. The gears run in an almost contactless manner in the measuring chamber. The ...

Volumetric flow rate: 0 l/min - 200 l/min
Process temperature: -10 °C - 120 °C
Process pressure: 0 bar - 240 bar

... by the liquid flow based on the displacement principle. The gears run in an almost contactless manner in the measuring chamber. The bearing consists of ball and plain bearings. The measuring principle ...

Volumetric flow rate: 0.4 l/min - 3,750 l/min
Process temperature: -40 °C - 210 °C
Process pressure: 0 bar - 480 bar

... screw spindles with rolling-element bearings for low friction. The liquid flow makes the spindles rotate (displacement principle) and runs through the device in axial direction. Flow ...

Process temperature: -30 °C - 160 °C
Process pressure: 0 bar - 40 bar
Precision: 1, 0.5 %

The Fix-mounting ultrasonic flow meter can be applied to a wide range of pipe flow measurements. Applicable liquids include pure liquids as well as liquid ...

Process temperature: -30 °C - 160 °C
Precision: 1 %
Repeatibility: 0.2 %

The Pannel mount type ultrasonic flow meter can be applied to a wide range of pipe flow measurements. Applicable liquids include pure liquids as well ...

Process temperature: -30 °C - 160 °C
Precision: 1 %
Repeatibility: 0.2 %

... Explosion proof type ultrasonic flow meter can be applied to a wide range of pipe flow measurements. Applicable liquids include pure liquids as well ...

Precision: 0.2 %

... ADVANTAGES OF ELECTROMAGNETIC FLOWMETERS OVER OTHER FLOWMETERS · There are no mechanical parts that prevent the flow and reduce the pressure. · Measurement scale; It is ...

Mass flow rate: 2.2 kg/h - 243,954.9 kg/h
Volumetric flow rate: 0.5 m³/h - 14,000 m³/h
Process pressure: 1 bar - 25 bar

... Spectral analysis, improve the ability of anti-interference and vibration resistance * A variety of measuring medium: vapor, liquid, gas and natural gas, etc. * Low power consumption, one dry cell can maintain 1 year * ...

Process temperature: -30 °C - 110 °C
Repeatibility: 0.2 %

... DN6000 according to sensor sizes. The absence of an inner coating (concrete, fiberglass, etc.) in the pipes that these model flow meters will be used in, the fact that the pipes are not rusted, damaged, ...

Volumetric flow rate: 18 l/min
Process temperature: 0 °C - 90 °C

... between tube and transducer •No external electronics for a compact design and simple handling •Customer calibration for different flow rates

Volumetric flow rate: 0.3 l/min - 140 l/min
Process temperature: -20 °C - 70 °C

SONOFLOW CO.55 CLAMP-ON SENSOR - NON-CONTACT FLOW METERS FOR LIQUIDS IN FLEXIBLE TUBES The ultrasonic clamp-on flow meter SONOFLOW CO.55 measures ...

Volumetric flow rate: 14 l/min
Process temperature: 10 °C - 50 °C

The hybrid flow-bubble sensors of the series SONOFLOW CO.56 Pro V2.0 and SONOFLOW CO.56 combine accurate flow measurement and reliable air bubble detection in liquid filled medical tubing. ...

Volumetric flow rate: 0.2 l/min - 100 l/min
Process temperature: -10 °C - 60 °C
Process pressure: 16 bar

... Aggressive Liquids, Wine, Liquids with conductivity> 20µS/cm Documentation included - English instructions manual, Italian instructions manual, Test report Explosion protection - Safe zone Integrated ...

Volumetric flow rate: 0.1 m³/h - 9.5 m³/h
Process temperature: -20 °C - 130 °C
Process pressure: 0 bar - 64 bar

The RIF100 is an electromagnetic flow meter that utilizes Faraday's principle to measure the velocity of the liquid and convert it into a signal proportional to the flow. Among ...

Volumetric flow rate: 120,000 l/h
Process temperature: -30 °C - 300 °C
Process pressure: 40 bar

The RIV500 series of Flowmeters in AISI316L is suitable for medium and high flow rates of liquids, even corrosive, even at high pressures and temperatures. They are available with local ...

Mass flow rate: 1 kg/h - 200 kg/h
Process temperature: 5 °C - 50 °C

... thermal OOL mass flow meter can be easily integrated into new or existing industrial systems. Its robust housing contains IST AG's well-established OOL technology that makes the corrosion resistant ...

Volumetric flow rate: 0.1 m³/h - 61,072 m³/h
Process temperature: -25 °C - 180 °C
Process pressure: 40 bar

Electromagnetic induction flow meter Suitable for conductive fluids Size from DN 10. to DN 2200 Flanged / Threaded UNI-ISO-ANSI Electrodes in SS316L-Hastelloy C-Titanium-Monel-Tantalio-Tungsten Internal ...

Volumetric flow rate: 0.1 m³/h - 61,072 m³/h
Process temperature: -25 °C - 180 °C
Process pressure: 40 bar

Model AI.MF1000R Electromagnetic induction flowmeter Suitable for conductive fluids Size from DN 10. To DN 2200 Flanged / UNI-ISO-ANSI threaded Electrodes in SS316L-Hastelloy C-Titanium-Monel-Tantalum-Tungsten Internal ...

Volumetric flow rate: 0.1 m³/h - 61,072 m³/h
Process temperature: 40 °C - 180 °C
Process pressure: 40 bar

The AI.MF2000C series electromagnetic flow meters can be used to accurately measure the flow rate of any type of conductive liquid which are electrical conductors, caustic ...

Process temperature: -40 °C - 150 °C
Process pressure: 5 bar - 200 bar

The IFR1500 flowmeter is a device dedicated to measure injected volumes or masses but also the injection rate step by step from your injector. It is perfectly suited to the control of high energy multi-shot injection ...

Process temperature: -20 °C - 150 °C
Process pressure: 10 bar - 200 bar
Precision: 0.1 %

The IFR 6000-40000 (Injection Flow and Rate) flowmeter is dedicated to instantaneous flow measurement of large and very large injection volumes and injection rate. It makes possible controlling ...

Process pressure: 10 bar - 100 bar

The IFR 600 (Injection Flow and Rate) flowmeter is a device intended to measure injection volumes or masses but also the injection law step by step. It is used to control the high energy systems fitted ...

Volumetric flow rate: 2.5 m³/h - 25 m³/h
Process temperature: -20 °C - 60 °C
Process pressure: 0.2 bar - 16 bar

... Industrial flowmeters includes autonomous counters with electronic display only (LCD) and flow meters with LCD and output interface cable for sending ...

Volumetric flow rate: 0.7 m³/h - 7.2 m³/h
Process temperature: -20 °C - 60 °C
Process pressure: 0.2 bar - 16 bar

... Industrial flowmeters includes autonomous counters with electronic display only (LCD) and flow meters with LCD and output interface cable for sending ...

Volumetric flow rate: 1 l/h - 600 l/h
Process temperature: -20 °C - 60 °C
Process pressure: 2 bar - 25 bar

... fuel, mineral (heating) oil and other liquids with kinematics viscosity of 1.5 cSt to 6 cSt can be measured by DFM. DFM fuel flow meter is a tool for direct fuel consumption measurement, ...

DTJ6 flow meter adopts advanced technology, which can be widely used on different gasoline dispensers. This product has advantages as long using term, high precision, firm structure etc. It can be the ...

Volumetric flow rate: 5 l/min - 100 l/min

J100 flow meter adopts advanced technology, which can be widely used on different gasoline dispensers. This product has advantages as long using term, high precision, firm structure etc. It can be the ...

Volumetric flow rate: 5 l/min - 140 l/min

TANSUNO Type Flowmeter DTJ4, DTJ4A, and DTJ4B flow meter adopts advanced technology, which can be widely used on different gasoline dispensers. This product has advantages as long ...

Volumetric flow rate: 0.2 m³/h - 95,560 m³/h
Process pressure: 1.6, 1, 0.6 MPa

... SMT) are implemented to improve the reliability. Electromagnetic flow meter technical parameters Display: reaches 8element liquid crystal display, current clock to indicate flow ...

... SUTO ultrasonic clamp-on flow meter for water and other liquids S461 has all it takes to measure reliable, easy and accurate flow and consumption of ...

The SUTO S462 Clamp on Ultrasonic Flow Meter for water and other liquids offers our users easy installation, no process downtime, no pressure loss or leak and no contamination ...

Volumetric flow rate: 1 m³/h - 9,048 m³/h
Process temperature: -40 °C - 85 °C
Precision: 0.5 %

... input, 2 active analog inputs Reverse Flow - Instant measure and totalization of reverse flow Flow Cutoff - Adjustable. Below selected value, instantaneous flow ...

Process temperature: -40 °C - 100 °C
Precision: 0.5, 0.2 %
Repeatibility: 0.1 %

Flow measurement for conductive and chemically aggressive liquids Neoprene / PTFE coatings Power supply 85÷265Vac; 12Vdc; 20÷30Vdc/Vac Datalogger on USB pendrive Remote control via Smartphone Description RPmag ...

Volumetric flow rate: 0.1 m³/h - 18,000 m³/h
Process temperature: -40 °C - 100 °C
Precision: 0.5 %

... passive 4÷20mA, Pulse: open collector Reverse Flow - Instant measure and totalization of reverse flow Flow Cutoff - Adjustable in units of flow measurement. ...

Volumetric flow rate: 3 l/h - 250 l/h
Process pressure: 10 bar

... , alkalines, acids Direct visualisation of the measured values Accuracy class 4 Integrated mounting rail for flow data sensors Advantage • Measured measuring ranges oriented to practice according ...

Process temperature: -35 °C - 60 °C
Precision: 1 %

NON-CONTACT FLOW MEASUREMENT FOR WASTEWATER TREATMENT PLANTS, SEWERS AND INDUSTRIAL WATER CHANNELS The SQ-R measures continuously and contact-free the flow rate of effluent channels, ...

Process temperature: -35 °C - 60 °C

... - No structural work is necessary in the water - No threat to the system through flooding - Measuring range from +/- 0.10 to +/- 15 m/s (depending on the flow conditions) - Recognition ...

Process temperature: -35 °C - 60 °C
Precision: 1 %
Repeatibility: 0.1 %

... necessary in the water - No threat to the system through flooding - Low power consumption enables operation using solar cells - Recognition of flow direction - Measuring range from +/- ...

... Signature flow meter is designed for open channel flow monitoring applications. It supports flow measurement technologies including bubbler, non contact laser area velocity, ...

Volumetric flow rate: 0.025 l/h - 250 l/h

Used in workshop or laboratory, they are equipped with a flow adjusting valve.