Liquid flow meters

Volumetric flow rate: 0 l/min - 500 l/min
Process pressure: 140 mbar - 4,000 mbar
Precision: 0.5 %

The DM500 tester is the evolution of the DM400. It uses the same measurement technology, a mass flow meter. It’s intended for all applications requiring flow control, can be integrated ...

Volumetric flow rate: 1 l/min - 350 l/min
Process temperature: -20 °C - 60 °C
Precision: 2.5, 5 %

To capture gas flows away from the source of the leakage rate, measured by sampling at high speed, thus there is a dilution of the surrounding air. Accurate sample flow rate and natural gas concentration ...

Process temperature: -40 °C - 350 °C
Process pressure: 1.6 MPa - 4 MPa
Precision: 1, 1.5 %

... series Vortex Flow Meter can be used to detect and measure the flow of all kinds of gas, fluid and steam. 1% accuracy stainless steel steam gas liquid ...

Volumetric flow rate: 0.8 l/min - 33,880 l/min
Process temperature: -29 °C - 71 °C
Process pressure: 10, 7 bar

The Tucor Ultrasonic Flow Meter Assembly (“UFM-A”) is a flow meter for the modern age of irrigation, with a design optimized for retrofit. Capable of measuring ultra-low ...

Process temperature: 0 °C - 50 °C
Process pressure: 0.45 MPa
Precision: 1, 0.35 %

... coefficient is less than 0.02%F.S./℃(zero)，0.05%F.S./ ℃ (span). 　　3. Metal-Sealed Models and High Purity Feature 　　The wetted flow path of-the-the-line CS200 MFC is constructed from surface-passivated stainless ...

Volumetric flow rate: 2 l/h - 100 l/h
Process temperature: 150 °C
Process pressure: 34, 15 bar

For very small flow rates Measurement according to the oval gear principle For thin-bodied up to viscous liquids Low friction resistance Very precise dosing possible High resistance Wide range of ...

Process temperature: -180 °C - 650 °C
Precision: 1, 0.5, 3 %

... Hydronic balancing Injection systems Demineralized water Cold – / Heat exchangers Clean Rooms Temporary replacement inline flowmeters Verification inline flowmeters Leakage- / ...

Volumetric flow rate: 20 l/h - 640,000 l/h
Process temperature: 0 °C - 120 °C
Process pressure: 0.1 bar - 11 bar

Magnetic-inductive flow meter VOLUMTEC Construction according to hygienic design standards, all Measurement in both flow directions Adjustability of the illuminated LC-Display Self-monitoring ...

Volumetric flow rate: 0.6 l/min - 700 l/min
Process temperature: -40 °C - 120 °C
Process pressure: 150, 250, 300, 420, 160 bar

The FTB200 series flowmeter contains a magnetic detector and a magnetically permeable rotor (impeller). The flow of the medium drives the rotor (impeller) to turn. The rotational speed of the rotor (impeller) ...

Features Low Cost, Small, Lightweight, and Portable High Accuracy Gauss or Tesla Display Units 0.1 mG /.01?T resolution Low Battery Detection

Volumetric flow rate: 30 l/h - 640,000 l/h
Process temperature: 0 °C - 130 °C

Magnetic inductive flow and volume measurement of media with a minimum conductivity >5 µS/cm | With IO-Link Now with IO-Link: Discover the advanteges in our new IO-Link Brochure! For liquids, mash ...

Volumetric flow rate: 0 m³/h - 1,140 m³/h
Process temperature: 200 °F
Process pressure: 100 psi

FLO-METER™ FLOW MEASUREMENT FOR GASES AND LIQUIDS The UPC-Marathon Flo-Meter™ is a rugged and cost-efficient flow meter for gases ...

Volumetric flow rate: 5 m³/h - 2,400 m³/h
Process temperature: -40 °C - 200 °C
Process pressure: 0 bar - 200 bar

... is very suitable for opaque, corrosive or dangerous fluids used in most industrial processes. Its robust design enables the flow of viscous fluids or gases to be measured under particularly severe operating conditions. Indication ...

Due to its design, the 4L flow meter is especially well suited for installation in panels and wall mounting. With the available standard measuring tubes it can be used for many measuring ranges. Protective ...

Process temperature: -450 °F - 450 °F

... Turbine Flow Meter made up with 316 stainless steel material and is used for transferring and flowing applications. This device is equipped with a blade rotor and flanges that is also made from stainless ...

Process temperature: 500 °C
Process pressure: 600,000 Pa - 42,000,000 Pa

LG Venturi Flow Meters Flow element, also known as differential pressure flow meter, consists of a primary detection piece (flow element) ...

Process temperature: 60 °C - 100 °C
Process pressure: 0 bar - 16 bar

Flowmeter according to the variabel area principle for liquids

Volumetric flow rate: 260 us gal/min - 52,000 us gal/min
Process pressure: 0 bar - 27.58 bar

... insertion flow meter that is intended to be retrofitted into an automatic control valve. It provides an accurate flow measurement data without installing a separate meter. ...

Process temperature: 0 °C - 150 °C
Process pressure: 0.2 bar - 300 bar

A turbine flowmeter operating on the Pelton wheel principle for low flowrate applications on low viscosity fluids. Conventional axial flow turbine meters become increasingly difficult ...

Process temperature: -40 °C - 70 °C

MULTIPHASE FLOW METERING Flowatch 3I The Pietro Fiorentini Multiphase and Wet Gas Flow Meters are non intrusive, inline systems providing real time measurement of oil, water ...

Volumetric flow rate: 0.2 l/h - 44,000 l/h
Process temperature: -10 °C - 260 °C
Process pressure: 0 bar - 29.4 bar

... Series, manufactured by Oval Corporation, is a positive displacement flow meter designed to provide an accurate liquid flow rate measurement. It has a maximum nominal ...

Volumetric flow rate: 1 m³/h - 4 m³/h
Process temperature: 50 °C
Process pressure: 0.3 bar - 16 bar

... starting flow and is permitted for all installation positions. The meter is equipped with an 8-digit glass/copper register (IP68) and a modulator disc. This enables electronic, non-reactive scanning ...

Volumetric flow rate: 0.2 ft³/s - 10 ft³/s

... station. FLYGT FLOW METERS The MagFlux electromagnetic flow meters combine high accuracy, stability and low maintenance to deliver linear readings over a large range ...

Volumetric flow rate: 10 l/min - 150 l/min
Process pressure: 0 bar - 3.5 bar

FMS-P is a digital flow meter designed to control the transfer system, allowing the fuel to be supplied only to authorised users. The authorisation is given by the owner of the system (MASTER) who can ...

A fast and easy change of the factory preset parameter allows the operation friendly display and the sensor keys – without opening the housing. The “Easy-Up” function guides the unpracticed user step by step fast and safe through the ...