Process temperature: 5 °C - 60 °C
... contactless drip chamber sensor SONOCHECK ALD monitors the liquid level in infusion therapy, dialysis or parenteral nutrition. Small foamy bubbles are ignored by the clamp-on sensor. There ...
Level range: 0 m - 100 m
Level switch fitted on the inside of the tank to activate a remote and/or local alarm when the tank requires refilling.
Process temperature: -40 °C - 100 °C
... Over Voltage Protection • 1mm liquid level detecting precision • Low Power: 5mA with output low • Temperature range: -20~55℃ or - 40°C~100°C • Highly chemical resistance material: Polysulfone or ...
Intellisense Microelectronics
Level range: 12 mm
Process temperature: -40 °C - 100 °C
The optical liquid level switch consists of an infrared LED and a receiver. In air, the light beam from the infrared LED is reflected back into the receiver. When rising liquid touches ...
Intellisense Microelectronics
Process temperature: -40 °C - 100 °C
Optical liquid level switches use the light reflection principle in the prism to detect whether there is liquid at the installation position of the sensor. These optical ...
Intellisense Microelectronics
... content from 0.001…2,5 mg/m³, 3…16 bar. Highly precise PID sensor, integrated mini catalyst for zero point calibration -Permanent, highly precise residual oil measurement (oil vapor) with PID sensor ...
... mobile measurement: The PID sensor is ready for measurement within about 30 minutes -OIL-Check 400 – residual oil measurement of the vaporous residual oil content from 0.001…2.5 mg/m³, 3…16 bar. Highly precise PID sensor, ...
Level range: 0 m - 2 m
Process pressure: 1 bar - 30 bar
Process temperature: -40 °C - 80 °C
The Level Sensors have the following Features: - G3/8" to G2", Flange (round and oval) others on request - PVC- and Silicone-cable - M12-connector - Alu- and ABS-enclosure - Grid: 5 or 10 mm - Overall ...
Process pressure: 1 bar - 60 bar
Process temperature: 0 °C - 125 °C
The Optical Sensors have the following Features: - M12, G3/8", G1/2", NPT - PVC-cable - M12-connector - NO in Air, NC in Air - PNP, NPN open collector - Temperature range upto +125°C - upto 60bar - upto IP67 - ...
Level range: 1 m
Process pressure: 1 mbar - 5 mbar
Process temperature: 120 °C
... of a fluid level Ready-to-use solution Self-powered Emission on event (Alert) Double level of detection Compatible with KARE© services EXAMPLE OF USE CASE Fluid ...
Process temperature: -20 °C - 70 °C
Capacitive level controls are widely used where it is necessary to control the level of substances both solid and liquid which may not be conductive. They are particularly used in silos ...
AECO
Process temperature: -20 °C - 60 °C
... current which is used to indicate the level. APPLICATIONS Capacitive level controls are widely used where it is necessary to control with a good safety margin of intervention the level ...
AECO
Process temperature: -20 °C - 60 °C
They work on the resistivity of liquids and sense the level via the electrodes placed in the conductive liquids. The presence of liquid between the ...
AECO
Level range: 4 m
Process pressure: 25 bar
Process temperature: 80 °C
- Liquid alarm sensor for conductive media - Includes line-break monitoring - Can be integrated in M&C universal filters with GL connection and flow chamber LS - Connection: ø 12 mm - With 4 m electrical ...
M&C TechGroup Germany GmbH
Level range: 4 m
Process pressure: 0 bar - 25 bar
Process temperature: 80 °C
- Liquid alarm sensor for conductive media - Includes line-break monitoring - Can be integrated in M&C stainless steel universal filters with condensate drain and flow chamber LS25 - Connection: 1/4" ...
M&C TechGroup Germany GmbH
Process pressure: 2 bar - 11 bar
Process temperature: 0 °C - 60 °C
... non-conductive media. The new liquid alarm sensor type KS3 replaces the KS2. The KS3 is an adequate replacement for the KS2.Ex model. The former KS2 plastic enclosure has been replaced by a rugged aluminium ...
M&C TechGroup Germany GmbH
Hydrostatic level probes - Any measurement range from 1 up to 500 m H2O - Integrated internal overvoltage protection circuit - Marine certificate DNV - ATEX Intrinsic safety
APLISENS S.A.
APLISENS S.A.
Smart level probes SGE-25.Smart and SGE-25S.Smart - Programmable zero shift, range and damping ratio - 4...20 mA output signal + HART protocol - Accuracy 0.1% - Integrated internal overvoltage protection ...
APLISENS S.A.
Level range: 6 m
... casing head IP 67 • The UFM is an ultrasonic sensor for continuous level measurement without contact with the fluid. Advantage • Principle of measurement without contact • Options for distance, ...
Level range: 0 m - 6 m
Process pressure: 0 bar - 20 bar
Process temperature: -30 °C - 105 °C
Measuring resolution 5 – 10 – 20 mm. Local indicator 4 digit (9999) Display and electrical connection are independently rotatable 335°/343° The principle of operation is of potentiometric type, based on the gradual shutdown of a ...
VAL.CO srl
Level range: 0 m - 6 m
Process pressure: 0 bar - 50 bar
Process temperature: -30 °C - 105 °C
Measuring resolution 5 – 10 – 20 mm. Local indicator 4 digit (9999) Display and electrical connection are independently rotatable 335°/343° The principle of operation is of potentiometric type, based on the gradual shutdown of a ...
VAL.CO srl
Level range: 0 m - 5 m
Process pressure: 0 bar - 6 bar
Process temperature: -30 °C - 105 °C
Brass ─ Spansil Measuring resolution 5 – 10 – 20 mm Local indicator 4 digit (9999) Display and electrical connection are independently rotatable 335°/343° The principle of operation is of potentiometric type, based on the gradual ...
VAL.CO srl
Level range: 50 mm - 3,000 mm
Process pressure: 10 bar
Process temperature: -40 °C - 125 °C
The magnetic level sensors of the SRF-381 series are based on the action of one or more reed switches located inside the tube where the magnetic float moves. The magnetic field activates the relays ...
Level range: 0 m - 150 m
Process temperature: 0 °C - 70 °C
Hydrostatic level sensor measures the level with the help of liquid pressure, It transfers information to the control equipment by converting the pressure value formed ...
ENELSAN ENDUSTRIYEL ELEKTRONIK SANAYII A.S.
Level range: 4 m
Process temperature: -20 °C - 80 °C
+- 30% / 2W Max. 300mA M68*20 Connection 0.25-0.5 Sensitivity 0.02% Resolution, Max. 4 Meter Measurement Adjustable Blind Spot <100mm 15° +/- 2° Measuring Angle Free PC Software
ENELSAN ENDUSTRIYEL ELEKTRONIK SANAYII A.S.
Level range: 10 m - 30 m
Process pressure: -1 bar - 3 bar
Process temperature: -40 °C - 130 °C
Margin of Error: ±5 mm Process Connection: Threaded G1½ A or OPS. 1½ NPT, Flanged from DN 50 Operating voltage: 14… 36 V DC
ENELSAN ENDUSTRIYEL ELEKTRONIK SANAYII A.S.
The level CAP80 transducer delivers the measure of the fill level for tanks containing conductive and non-conductive liquids (water, water solutions, food liquids, ...
FIAMA
Level range: 100 mm - 3,000 mm
Process pressure: 350, 700 bar
Process temperature: -40 °C - 110 °C
The level transducers of the PCS III series are rugged, accurate, without mechanical wear between the measuring probe and the float, they are resistant to shock and vibrations and are equipped with protection against ...
S2Tech srl
Level range: 0 m - 200 m
Process temperature: 0 °C - 80 °C
... model LV35 submersible Liquid level transmitter is designed for use in applications where the pressure is created by corrosive pressure media. The pressure diaphragm is made from tantalum and the housing ...
Level range: 700 mm - 6,000 mm
Process pressure: 84,000 Pa - 107,000 Pa
Process temperature: -40 °C - 85 °C
LIGO SP-AF is a sensor line using capacitive technology with high accuracy up to 99.5%. The sensor with two output modes, Analog and Frequency, can be connected to any GPS device with a flexible range ...
Process temperature: -40 °C - 100 °C
Intrinsically safe level probe for all pressure measuring ranges within the limits between 0,1m water column (WC) and 250 mWC for level measurements in tanks, systems ...
ADZ NAGANO GmbH
Level range: 0 m - 35 m
Process temperature: -40 °C - 80 °C
... principle The so-called pulse procedure sends a short microwave impulse to the water surface. Afterwards the sensor remains in standby for a short time. Within this time the water reflects ...
Process temperature: -40 °C - 65 °C
... are designed to provide a high level of sensitivity, stability and durability for powder and bulk solids applications, as well as liquid and slurry applications. Monitors two-year warranty stands behind ...
... flood monitoring, waster water management, fill level monitoring in grains or fertilizer. The measurement is based on ultrasonic waves transmitted and reflected back from nearby objects. EM500-UDL Ultrasonic ...
Milesight IoT
The Guidense TDR100 is a guided wave radar (GWR) for continuous level measurement and point level detection in liquids and solids, with active analog and digital control output. Mechanical ...
LN Potentiometric Level Transmitter A top mount insertion probe, the LN is designed with process control in mind. Ideal for filler bowls, balance tanks, and pressurized vessels, the LN is immune to pressure or temperature ...
Level range: 0 m - 200 m
Process temperature: -40 °C - 85 °C
For sea water, dirty water, oil, solvents. CS-PT400-WH are level sensors with special structures for specific applications. The characteristics of the products are: high precision, small size, stability, ...
Please specify:
Help us improve:
remaining