DN: 1 in
Temperature: 0 °C - 150 °C
3-way vacuum valve with right-angle body Function VACUUM/ VACUUM-BREAKER when used with vacuum pumps Function DIVERTER VALVE when used with blowers Double-acting pneumatic actuator Upon request NO ...
DN: 0.5 in - 2 in
Pressure: 16 bar
Temperature: -20 °C - 80 °C
... PA66 cylinder Valve status indicator Closing against flow Applications Water and other liquids in which debris is contained Please check Chemical Compatibility Chart to verify ...
DN: 15 mm - 25 mm
Pressure: 0.2 bar - 17 bar
Temperature: 210, 80, 200 °C
The ADCA PRV25 is a series of direct acting pressure reducing valves designed for use on steam, compressed air, water and other gases and liquids. These regulators are suitable for reducing ...
VALSTEAM ADCA Engineering S.A.
DN: 0.25 in
Pressure: 0.2 bar - 200 bar
Temperature: 80 °C
... series of direct acting, spring loaded, piston sensing pressure reducing valves. These regulators are designed for use with nitrogen, compressed air, water and other gases and liquids ...
VALSTEAM ADCA Engineering S.A.
DN: 15 mm - 20 mm
Pressure: 3 bar - 200 bar
Temperature: 0 °C - 80 °C
... series of direct acting, spring loaded, piston sensing pressure reducing valves. These regulators are designed for use with nitrogen, compressed air, water and other gases and liquids ...
VALSTEAM ADCA Engineering S.A.
DN: 1 in - 10 in
Pressure: 0 bar - 400 bar
Temperature: -120 °C - 650 °C
... one device including one upstream valve, one quick action line blind and one downstream valve. The mechanical safety interlock between the Line Blind and the valves prevents any operation ...
DN: 2 in - 24 in
Pressure: 16 bar - 250 bar
... entry ball valves are used in piping systems where the top of the valve can be removed to gain access to the ball and seats without removing the entire valve from the piping system. Typically ...
Athena Engineering S.r.l.
DN: 2 in - 40 in
... - Offered with self relieving seats or optional double piston sealing. Special seat compounds are also available. - Each valve meets API-6D, API 6FA and Nace requirements. - Optional stem extensions, actuators, pipe ...
Athena Engineering S.r.l.
DN: 1.5 in - 80 in
Pressure: 2.2 MPa
Temperature: -29 °C - 425 °C
... ATHENA manufactures a wide range of eccentric butterfly valves, including double eccentric butterfly valves and triple offset butterfly valves, as well as other high performance butterfly ...
Athena Engineering S.r.l.
DN: 3, 0, 4 in
Pressure: 230 mbar - 8,000 mbar
Temperature: -20 °C - 40 °C
... subsequent amendments. Valve is used to prevent any possible overfill during charging hazardous or dangerous fluids. Application: petrochemical. food. pharmaceutical & more. Valve opens and closes automatically No ...
DN: 3, 4 mm
Pressure: 230 mbar - 8,000 mbar
Temperature: -20 °C - 60 °C
... subséquent amendments. Valve is used to prevent any possible overfill during charging hazardous or dangerous fluids. - Application: petroc hernie al. food. pharmac eutic al & more. - Valve opens and ...
DN: 3 in
Pressure: 230 mbar - 8,000 mbar
Temperature: 60 °C
... subseguent amendments. Valve is used to prevent any possible overfill during charging hazardous or dangerous fluids. - - Application: petroc hernie al. food. pharmac eutic al & more. - - Vaive opens and closes automatically. - ...
DN: 4, 8, 6 mm
The Burkle 2 and 3-way valves are utilized for transferring liquids or gases in order to release, block, or divert the direction of the flow. The PVDF-transparent framework allows optimum chemical resistance ...
DN: 0.375 in - 2 in
Pressure: 10 bar
Temperature: -20 °C - 150 °C
... the flow of the liquid. Return Spring: Often, there is also a return spring that pushes the armature or piston into a closed position when the coil is not energized. Orifice or Valve: The orifice or ...
DN: 0.375, 0.5 in
Pressure: 0 bar - 6 bar
Temperature: 0 °C - 100 °C
PVA float valve series PEKI-VA made of stainless steel in 3/8 and 1/2″ Our PEKI mechanical brass valve series has been manufactured for decades from high-quality hot-pressed parts and precision turned ...
DN: 0.375, 0.5 in
Pressure: 0 bar - 5 bar
Temperature: 0 °C - 70 °C
... of the PVA 480 Compact Float Valve Series Revolutionary Design: Developed by our experts and sold with patent protection for many years, the PVA 480 series offers an extremely space-saving solution in the float ...
DN: 1.5 in - 56 in
Pressure: 0.3 psi - 8 psi
Temperature: -15 °C - 80 °C
... Presssure Sustaining Valve, also known as Back Pressure Valve, or Back Pressure Sustaining Valve, is a valve that maintain required pressure of inlet port by opening ...
DN: 0.5 in - 3 in
Pressure: 0 psi - 144.2 psi
Temperature: 0 °C - 80 °C
Model ST-FG Float Valve Switch, also known as Float Ball Switch, is a type of level sensor, a device used to detect the level of liquid within a tank. How does a Float Valve Switch ...
AWF
AWF
DN: 4, 6 mm
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 150 °C
... stickings and detachment liquids. Function: Nebulizer for fluids with Venturi effect with adjustable spout by means of a knurled ring nut Activation Pneumatic: the aspiration of the liquid happens ...
DN: 65 mm - 150 mm
Pressure: 16, 10 bar
... Galvanotécnica Use • For blockage of piping systems Fluids • Neutral media free from solids and aggressive liquid or gaseous media if the valve components that contact the media are resistant ...
DN: 25 mm - 1,000 mm
Pressure: 1 mbar - 16,000 mbar
Temperature: -40 °C - 230 °C
Plastic lined butterfly valves SBP are available in either wafer or lug style for on/off, throttling or control applications for liquid, powdery media or gaseous service. Main features • Large selection ...
Swissfluid AG
DN: 1 in - 3 in
Pressure: 50 bar
Temperature: -40 °C - 200 °C
Fully lined Ball Valves for shut-off and control of corrosive, permeating liquids or gaseous media. Main features • Two-piece body, metal-to-metal joint • Anchored lining with positive locking to ...
Swissfluid AG
DN: 25 mm - 80 mm
Pressure: 16 bar
Temperature: -40 °C - 200 °C
Fully lined short pattern, Wafer-style Ball Valves for shut-off and control of corrosive liquids and gaseous media. Main features • light weight and space-saving two-piece body with metal-to-metal ...
Swissfluid AG
DN: 32 mm - 900 mm
Pressure: 6, 2.5, 16 bar
Temperature: -20 °C - 200 °C
PTFE lined centric butterfly valve for corrosive fluids and high-purity applications. Designed and manufactured for over 20 years in Switzerland, Bianca is built for long-lasting use in highly demanding media and environments ...
InterApp AG
DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C
... the request of customers . The gate valve body is made of cast steel and it is suitably dimensioned to assure a high safety factor. The thicknesses are always higher than the mini-mum ones established for GATE VALVE ...
Di Nicola Infinam Srl
DN: 100 mm - 3,000 mm
Pressure: 16, 10, 25 bar
Temperature: -40 °C - 200 °C
... be used as a safety valve (positive safety valve able to close even in case of tampering) In addition to the above mentioned technical advantages there is a remarkable economical benefit as this valve ...
Di Nicola Infinam Srl
DN: 100 mm - 1,400 mm
Pressure: 2.5 bar - 64 bar
... of needle valve with the aid of actuators allows to utilize it in control systems with very différent functions. Water flow régulation actuated by needle valve is done by the horizontal ...
Di Nicola Infinam Srl
DN: 6, 4, 8 mm
Pressure: 0 bar - 20 bar
Temperature: 0 °C - 140 °C
... Römer flow and stop valve program consists of throttle, shut-off and check valves. The function fittings offer fine adjustment possibilities for the precise regulation of fluid flows. Throttle ...
AVS Römer
DN: 10 mm - 100 mm
Pressure: 16 bar - 64 bar
... sanitary ball valve made by positioning a precision ball with hole inside the valve body whose opening movement allows a product passage without restrictions thus reducing friction loss to a minimum. ...
BARDIANI VALVOLE S.p.a.
DN: 0.5 in - 2 in
Temperature: 14 °F - 356 °F
... to prevent water hammer on valve closure in liquid applications. Constructed of bronze, 316 Stainless Steel, and PTFE seals, the Series SAV-BT can be used in most gas, liquid, ...
... bubbles in a flowing liquid. During the liquid’s passage through a valve, the pressure drops from the inlet pressure (P1) to a minimum pressure (PVC) in the vena contracta, just past ...
DN: 15 mm
Pressure: 68 bar
Temperature: -20 °C - 200 °C
Introducing the RS PRO general purpose manual ball valve designed for industrial applications. Manual ball valves are used to operate shut off valves which control water ...
DN: 100, 32, 80, 40, 65 mm
Pressure: 28, 27.6 bar
Temperature: -50 °C - 105 °C
... Suction Stop Valves are used on low temperature applications to positively close suction lines and both liquid legs and gas returns on flooded evaporators. These piston type, gas pressure ...
Parker Refrigerating Specialties Division
DN: 0.25 in - 1.25 in
Pressure: 16, 25 bar
Temperature: -10 °C - 120 °C
... Mival ball valves are products of inginuity and brilliance. Widely familiar for their reliabilty and versatility. They are made from the highest quality of materials designed to last. The Mival ball valves ...
DN: 0.375 in - 1.375 in
Pressure: 0 psi - 225 psi
... evaporator regulating valves have a brass body, extended copper connections, and inlet strainer. They are available with a range of adjustable settings and optional pressure tap, the primary function of these valves, ...
Parker Sporlan Division
DN: 0.125 in - 0.75 in
Pressure: 414, 1,035, 690 bar
Temperature: -40 °C - 121 °C
... ®, CTFE Valve Stem 17-4 Stainless Steel Remaining Parts -316 Stainless Steel, Brass Flow CapacityVA Series -Valve: Cv = 0.75 -VG Series Valve: CV = 2.0 Weight (approximate) -VA ...
Emerson Automation Solutions - TESCOM
DN: 15 mm - 100 mm
Pressure: 16 bar - 40 bar
Temperature: -10 °C - 300 °C
Special features • - Consisting of globe valve and actuator • - Suitable for liquids, gases, and steam Accessories • - Type 2 N Strainer • - Type 2 NI Strainer Options • - Flow divider ...
SAMSON
Please specify:
Help us improve:
remaining