Liquids separators

... content in the wastewater, for separate disposal or further processing. The separator has a total volume of 4 m³ and can separate up to 8 m³ of waste water per hour. The oil separator ...

The design and materials of this series were coordinated especially for operation in NH₃ systems.

Discards water easily and safely Easy operation Requires minimal installation and maintenance Meets environmental regulations thus improving the company image Excellent performance thanks to oleophilic ...

Flow: 126 m³/h

Air flow [m³/h] 126 Air flow [m³/min] 2,1 Connection G 1/2 Dimension [mm] 89x267 Weight [kg] 1,1

Flow: 1,700, 2,400 l/min
Width: 290 mm

... according to the Water Resources Act Extremely efficient - automatic isolation and multiple cleaning stages Cost-effective solution due to separate purification TIP: Compressed air condensate often consists ...

... engineered by Kingspan, is an oil-water separator that functions for the treatment of sewage from industrial processes. This device is installed on surface water drainage systems to secure the collection ...

CORRUGATED PLATE INTERCEPTION SEPARATION (COALESCING PLATE SEPARATORS) INTRODUCTION CPI Packages are commonly used to separate oil and fats with low specific gravity. The water flows through corrugated ...

... horizontal position. This position that is obtained at the end of the cycle by means of an electrical contact, allows the water to flow freely between two operations. A device cleans the comb at each rotation and ejects ...

Flow: 30, 60, 90 m³/h

... system that give to sandy waste water a rotational movement; this rotation facilitates the sedimentation process and, at the same time, keeps in suspension the organic matters. The hopper’s bottom is fed with clean ...

Flow: 2 m³/h - 100 m³/h

... this way it is possible to aid the sedimentation and to allow the discharge of material without liquid. The clarified water flows out from the top side of the decantation hopper. PRINCIPAL ADVANTAGES Efficient ...

Flow: 300 m³/h - 1,000 m³/h
Filtration size: 3 µm - 20 µm

The air stream enters the separator tangentially at the top, creating a rotating airflow (vortex). By centrifugal force the dust or liquid particles are moved along the outside wall where they are separated ...

Flow: 150 l/h - 250 l/h

The AUTOMATIC OIL SEPARATORS of the CLEAN OIL series are characterised by their versatility; in fact, for a diversified production facility, one centralised system can be used to serve several machine tools, thus ensuring ...

This magnetic separator is composed of a rotating shell magnetic drum, that rotates properly inside a tank to channel the liquid flows around the magnets that is immobilised inside the rotating shell. A ...

Flow: 6 us gal/min - 3,410 us gal/min

Use our centrifugal-action separator to remove grit, sand, metal chips, fines, and other heavy solids from liquids. Perfect for use as a pre-filter to extend the life of fine filtration systems. These ...

A CB reception-flotation is an industrial reception tank deployed to remove floating impurities thanks to its built-in extraction gutter. Construction made of sandblasted stainless steel 304. Robust stainless steel reception ...

For catalytic deferrisation / demanganisation to a concentration of 8 mg / liter in water Prantner recommends the filter material pyrolusite. Pyrolusite acts as an insoluble catalyst and accelerates the ...

... returned to the sump. • Removes tramp oil from coolants in a variety of applications • Runs continuously • Variety of filters and floats available • Optional UV module prohibits bacterial growth

Flow: 12 m³/h - 21 m³/h

Flotation is a separation technique that takes advantage of specific gravity differences between solids e the liquid in which they are contained, taking them to the surface by means of special gases (air nitrogen) or ...

... each other in Vibratory Separators (also called Sifters) by using a vibrating motion. The Vibratory Separator can be used for screening dry powder or granular products as well as wet products and liquids. ...

Length: 18 in
Width: 9, 13 in
Weight: 11.7, 21.4 lb

The Sludge Barrier is a compact and portable magnetic separation system that removes small ferrous chips and fines from the coolant tank preventing in-tank sludge build-up while simplifying recovery and disposal for ease of maintenance. ...

Width: 96 in

Utilizing Platform Strategy, Derrick’s versatile Modular Slurry Separation Plant can be used for various civil construction applications such as horizontal drilling, microtunneling, and slurry wall milling. The innovative design provides ...

Clansman wedges are designed with the same attention to maximise factors which affect reliability. Rod Pistons and cylinder bodies are made from a single piece of steel. There are 2 pumps to maximise speed and minimise oil heating. There ...

Flow: 130 m³/h

In Definitive Ecology’s grit treatment system the grit slurry is fed through an inlet flange into a tank in which the solid particles are settled. Floating particulate is removed also thanks to special flow deflectors and the layout of ...

Flow: 375 ft³/min

... manual), transport, dewatering and compaction 1 - Standard Classifier sands 2 - Classifier sands with rotary drum filter / Sieve Wedge Wire 3 - Classifier sand with ...