Lubricant pumps

The SN-1 pump1 assembly is designed for pumping of high viscosity2 organic binding materials with viscosity up to 3 500 mm2/second and at temperature up to +180°C. This pump is used with waterproofing3, ...

Pressure: 220 bar - 315 bar
Fluid temperature: -15 °C - 80 °C
Weight: 3.4 kg - 3.7 kg

Double effect modular hand pumps to guarantee the flow in both lever movements. Ikron EP hand pumps offer a double-acting operation providing flow in both lever movement ...

Pressure: 700 bar

Ultra light manual and foot operated pump, glass fibre reinforced nylon tank, and aluminium body covered in nylon. Two speeds, very low force on lever, lever blocking system. Non-conducting ...

Flow: 125 l/min
Pressure: 5 bar - 11.5 bar
Fluid temperature: 0 °C - 55 °C

... hydraulic oil, brake fluid, water etc. for pneumatic use with a compressor or manual use with the integrated hand pump select a suitable probe and suck easily using the vacuum principle suction ...

Flow: 151 l/min
Pressure: 0 bar - 241 bar

... mobile applications for the Construction, Forestry, and Oil & Gas markets. They are available as a standard pump, clutch pump, and tandem pump. Markets: • - Aerial • - Forestry ...

... Imperial/205 L) in under 90 seconds! Reversible unit fills and empties a drum. The All Stainless Steel Reversible Drum Angel/Drum Pump is a maintenance free system to recover spilled liquids, coolant, sludge, tramp oil, ...

Flow: 0.1003 us gal/min
Pressure: 80 bar
Fluid temperature: 10 °C - 80 °C

Compact & Cartridge pumps are compact units that can supply a few lubrication points directly with the smallest quantities of lubricant. The GMK-A piston ...

Flow: 30 l/min
Pressure: -0.4 bar - 10 bar
Power: 1.1, 0.75 kW

Our pumps offer benefits and innovations at various mobile and stationary applications. Nearly 40 years experience in thermal systems, connection technology and pumps has made us a global leader in advanced ...

Pressure: 250 bar
Fluid temperature: -29 °C - -17 °C

... and inexpensive alternative to glandless centrifugal pumps. The eSPU6 pumps are not self-priming, which means that the pump circuit must be well vented. Advantages Canned pump: ...

Flow: 5.5 l/min - 88 l/min
Pressure: 0 bar - 10 bar
Power: 0.55 kW - 4 kW

Low noise emission High vol. efficiency Good suction performance Integrated clutch bell housing Gerotor principle Not susceptible to contamination Off-line filters and/or coolers are being used in hydraulic and lubrication systems ...

... A, lubrication: the first to perform the lubrication time when the boot time. B, intermittent: boot time to perform the first batch of time. C, memory: the time before the start of the boot time. 3 lubrication ...

Pressure: 3 bar - 7 bar
Weight: 1.5, 1 kg

In principle, the Directoiler is an air-operated piston pump that supplies small controlled amounts of lubricant. The Directoiler is used for controlled oiling of compressed air. The ...

Flow: 1,700 l/h - 15,000 l/h
Power: 0.5 ch - 3 ch
Weight: 5 kg - 22 kg

... greater chemical and wear resistance. The liquid ring pump achieves suction by simply filling the pump casing through one of the hose connectors. Suction is active in both directions of rotation. The ...

Flow: 145 l/min
Pressure: 50 bar
Power: 7.5 kW

4 DIAPHRAGM PUMPS | MTS - 145 N Product Feature Table CODE - MTS-145 N FLOW (Lt.Min.) - 145 SPEED (R.P.M) - 540 POWER(HP/KW.) - 7.5 PISTON - 4 PRESSURE(BAR) - 50 OIL TYPE - 20W50 OIL CAPACITY - 1.1 DIMENSIONS ...

Flow: 700, 95, 35 m³/h
Pressure: 2.5, 12 bar
Power: 90, 22, 3.8 kW

MODEL : As constructor of pump systems, Pierre Guérin has developed together with the PACKO Inox Company a complete range of centrifugal pumps. The PCP–FP series is dedicated to the Food & Beverage industry ...

... glandless transformer oil pumps. We offer a large range of such pumps, from which customers can choose a type that suits their specific requirements and ensures optimum operating conditions. Due to their ...

Flow: 0.48 l/min - 264 l/min
Pressure: 25, 100 bar
Fluid temperature: -30 °C - 300 °C

... malodorous substances are pumped safely. The product chamber in the gear pump is completely separated from the environment by a containment shell. The torque is transferred from motor shaft to pump shaft ...

Flow: 2.4 l/min - 4.8 l/min
Pressure: 100 bar - 700 bar

Voltage Petrol engine RPM 8.000/min Pressure 700 bar Oil flow 0÷100 bar 4,8 l/min 100÷700 bar 2,4 l/min Oil Tank capacity l 2,7 Weightkg 17 Dimensions mm 360x280x420

Flow: 7.5 l/min - 90 l/min

Hand wing pump Double acting, with lever Body cast iron - innerparts brass-packing cotton/PTFE Female thread BSPP Operating temperatures up to 80° C Pumping water, oil and fuels Including lever. Sigma ...

Pressure: 200 bar

Ideal tool to pierce shocks absorbers, to aspirate the oils inside and to make flow them into the tanks. Functioning completely oil-dynamic. Max pressure: 200bar.

Power: 15 W - 600 W

... electrical oil pump for thermal management and lubrification in IC, HEV and BEV systems. The pump is available as smart and non smart version. FACTS & BENEFITS Modular BLDC motor concept fitting ...

Flow: 11 l/min
Pressure: 825 bar
Power: 0.37 kW

... self-priming electrig gear-wheel pumps EP are designed to transfer and dispense oil. An integrated bypass-valve limits the max. oil pressure. The pumps feature a protected switch and must be shut off ...