Lubricant pumps

Flow: 0.7 us gal/h - 300 us gal/h
Pressure: 50 psi - 175 psi

... stainless steel fasteners and NSF certifications make this powerhouse pump perfect for water treatment applications. Compared to solenoid pumps or lost motion designs, the Series G pumps ...

Flow: 0 m³/h - 900 m³/h
Pressure: 0 bar - 16 bar

Leistritz screw pumps of the L2NG/NT series are twin screw single volute, self-priming positive dis-placement pumps for low pressure duty, suitable for transport of slightly abrasive and corrosive, high ...

Flow: 0 m³/h - 250 m³/h
Pressure: 0 bar - 16 bar
Head: 0 m - 65 m

... Reliability: the pump is equipped with reliable oil lubricated bearing bracket, especially developed to be suitable even under heavy duty service. Design: UTN range share the same hydraulic design with the UCL series ...

Flow: 0 m³/h - 22 m³/h
Head: 0 m - 454 m
Power: 0.37 kW - 7.5 kW

4"Deep Well Pumps 4SG(M) Model:4SG(m) SHIMGE Pump has been committed to technical researches, manufacturing Deep Well Pumps , as well as providing first-class Deep Well Pumps ...

Flow: 10 l/min - 850 l/min
Pressure: 0 bar - 100 bar

... three screw pump. Flow rate per revolution 9.8 - 307 cm3 in 14 steps. The three screws, the central driven screw – the power rotor – which meshes with the two sealing screws – the idler rotors –are the only rotating ...

Flow: 0 m³/h - 900 m³/h
Head: 0 m - 225 m
Fluid temperature: -50 °C - 350 °C

Horizontal or vertical electric or engine driven process pump DISCHARGE & PERFORMANCE • Delivery up to 200 mm FEATURES • Back pull-out arrangement • Bearing oil cooling arrangement • Steam jacket arrangement • ...

Pressure: 175, 210, 160 bar
Power: 0 kW - 10 kW
Length: 222 mm

Fixed Displacement Vane Pumps – PV2R Single Vane Pumps – These pumps are of high pressure and high performance, which have been developed especially for low noise operation. To comply ...

Flow: 0.4 m³/h - 350 m³/h
Pressure: 3,625 psi - 7,250 psi
Fluid temperature: 0 °C - 80 °C

Injection Pump Mine and oilfield pumps Overview 3ZB, 5ZB series are mainly used for high pressure water injection and booster injection water in a single well. Performance Structural Type: 3ZB ...

Flow: 720 m³/h
Pressure: 16 bar
Head: 110 m

Slurry pumps have been designed for pumping liquid containing solid particles. Slurry pumps changes in design and construction to adjust to multiple type of slurry which varies in concentration of solids, ...

Flow: 0 l/min - 1.1 l/min
Pressure: 0 bar - 2,500 bar
Length: 405 mm

... fluids The MPS is a handy portable air driven mini pump that can be easily carried because of its weight (less than 17 kg with a filled tank) and size (405 x 308 x 365 mm). Although this mini pump ...

Flow: 0 m³/h - 114 m³/h
Pressure: 14 bar
Fluid temperature: -29 °C - 427 °C

The 123A Series™ internal gear pump is the ideal solution for crude oil, fuels, lube oil, and more because of its ability to handle a broad range of viscosities with constant flow rate. Features & Benefits For refinery ...

Flow: 20 m³/h - 102 m³/h
Pressure: 6.9 bar
Fluid temperature: 232 °C

he Jacketed Gear Pump for Asphalt Pumping asphalt presents unique challenges. Frequent changes to temperature and fluid characteristics demand a pump that is robust and adaptable. Blackmer V Series ...

... kinetic energy that comes out from impeller into pressure to force oil circulation. The pump can be a part of the pipe line due to the inlet and outlet of the pump are in the same axis. Therefore, the ...

Flow: 30 m³/h - 5,000 m³/h
Head: 10 m - 400 m
Power: 4 kW - 710 kW

... efficiency, energy saving, reliable and good suction performance. Guide vane type pump body, compared with pump casing type pump body, the radial force is eliminated to ensure that pump ...

Flow: 0.03333 m³/s
Head: 2 m - 42.5 m
Power: 1.1 kW - 12.5 kW

Submersible pump, with oil bath motor, for cooling and lubrication of the bearings and a double mechanical seal, oil bath (motor side) and water bath (pump side). Suitable for construction ...

Flow: 0 us gal/min - 15 us gal/min
Pressure: 0 psi - 150 psi

... UTILITY PUMPS Designed for use where low flow or transfer duties in both domestic and industrial applications are required, these self-priming pumps can achieve suction lifts up to 26 feet. Simple design ...

Pressure: 720 bar

... stage foot pump. The pump is ergonomically designed, has a robust, compact construction, is service- and maintenance-friendly and combines a low operating force with a high oil output. ...

Flow: 0.9 m³/h - 36 m³/h
Pressure: 7 bar

Almatec E-Series State-Of-The-Art Plastic AODD Pumps The development of the E-Series was based on the extensive experiences with the proven pump models. The solid design with distinctive wall thicknesses, ...

... different lubricant types, reduces further particle contamination and eliminates messy lubricant spills. A variety of filter elements are available to meet recommended manufacturer cleanliness levels. To ...

The Macnaught 20L ATF Hand Pump is your reliable fluid transfer companion. This pump is equipped with an anti-drip aluminium nozzle, ensuring precision and cleanliness with every stroke. No more messy ...

Flow: 20 m³/h - 350 m³/h
Power: 5.5 kW - 75 kW

... capacity and lift for desander pump, desilter, mud cleaner, mud mixing device, mud pump supplement, etc.. Sizes range from 3 x 2 to 8 x 6, and customers can choose different models according to their ...

Flow: 0 l/min - 15 l/min
Pressure: 35 psi - 60,000 psi
Power: 37 kW

... waterjet life. APW A16 intensifier pump is a miracle and it realizes the dream of every waterjet users whoever used, maintained or researched waterjet. APW waterjet integrated SIEMENS motor, imports REXROTH hydraulic ...

Flow: 12 m³/h
Power: 0.37, 0.25 kW
Weight: 8, 12 kg

The FL20C centrifugal pump is well known for its small size and high performance. Despite their small size, these pumps can provide flows up to 12 m3/h with good outcomes. FL20C pumps ...

Flow: 8 m³/h - 37 m³/h
Head: 7 m - 40 m
Power: 0.75 kW - 7.5 kW

... operation, the pump is refluxed and stirred, and mechanically crushed to prevent blockage. The YW pump is a single-stage single-suction, submersible centrifugal pump. The hydraulic components, ...

Flow: 0.4, 0.2, 0.1 l/min
Pressure: 200, 320, 400 bar
Power: 1.1 kW

The pump is designed to lubricate friction nodes in machines and devices through dosing distributors (two-way feeders). It is recommended for use in high-load machines and devices, with a large number ...