Lubricant pumps

Flow: 0 us gal/min - 160 us gal/min
Length: 450 mm
Width: 333.5 mm

... double-diaphragm (AODD) pump is engineered to safely seal when pumping aggressive chemicals. The 2" AODD pump offers an ideal combination of flow, size and portability, with a maximum flow rate of 163 ...

Flow: 0 m³/h - 2 m³/h
Head: 15 m
Fluid temperature: 0 °C - 60 °C

... fluids for this Atex pump range include; water, diesel, kerosene, Jet A1 fuel, petrol, alcohol, gas oil, solvents, toluene, acetone, trichloroethylene, white spirit and any other low viscosity compatible fluids. These ...

Flow: 4 m³/h - 140 m³/h
Pressure: 4 bar - 48 bar

pumping of media with solid contents pumping of media low to high viscosity continuous, gentle and low-pulsation flow précisé dosing flow in proportion to speed ADDITIONAL OPTIONS: • open hopper • feeder • explosion protection • ...

Flow: 10 m³/h - 1,400 m³/h
Weight: 142 kg - 1,956 kg

The Linatex pump, type III R, belongs to the latest generation of successful wear-resistant and corrosion resistant slurry pumps and has an improved efficiency. It has in practice proven durable Linatex ...

Flow: 1,000 m³/h
Pressure: 5 MPa
Fluid temperature: 30 °C - 230 °C

... are located on the same horizontal line, vertical installation, small footprint, easy installation. The pump has a separate bearing frame and the bearings are grease lubricated. The pump ...

Flow: 0 m³/h - 540 m³/h
Head: 2 m - 40 m

Nozzle diameters from 80 to 200 mm Continuous priming by vacuum pump Efficiency high Engines diesel or petrol Solids passage from 40 to 67 mm Impeller semi-open Air-oil separation system ...

Flow: 30,000 m³/h
Pressure: 2.5, 3.75 MPa
Fluid temperature: 105 °C

... )type series pump is new generation single stage double suction split casing centrifugal pump that is designed and produced by foreign advanced manufacturing technology of 1990’s 20th century. Application ...

Flow: 0.8 l/min - 7 l/min
Pressure: 10,000 psi

Compact three stage pump. The single valve block can be replaced by component FP-4, thereby allowing 2 or 4 tools to be driven simultaneously. Three stage induction motor driven so brushless. ...

Flow: 0 m³/h - 20 m³/h
Power: 80 W
Length: 485 mm

Marine Bilge Pump BK/BK-S Series BK-12 "NEW BILGE KING" Necessities for Boat • Auto-stop feature prevents dry running, increases pump performance and life. • Easy to use starter switch. Integrated ...

... -gas mixed transportation pump is specially designed for the oilfield industry. The oil, gas, water and solid mixed transportation greatly reduces the production cost and improves the... The oil-gas mixed transportation ...

Weight: 13.2, 14.2 kg

Heavy duty siphon & air hand-held pump Hand-held siphon pump Direct transfer pump Suitable for petrol, oil, diesel, water etc. Also acts as an air pump for ...

Flow: 30 m³/h
Head: 30.5 m
Power: 2.5 kW

Our best-selling PD pumps feature non-turbulent flows, continuous dry running and automatic self-priming. Quality-engineered, these pumps are durable and are easy to operate and maintain and are among ...

Flow: 15, 11, 6 us gal/min
Pressure: 307, 207, 172 Pa
Weight: 14.8, 17.2, 15.9 kg

The Muncie Power S Series hoist pump was designed specifically for use on small single or tandem axle dump trucks. The S Series hoist pump features a roller bearing design and can ...

Flow: 0 m³/h - 31.8 m³/h
Head: 0 m - 435 m
Power: 0.37 kW - 5.5 kW

... completely with Stainless Steel, which reduces corrosion and gives a good overall appearance to the motor. The motors are compact and weigh substantially less, which facilitates transportation storage & installation. The ...

Flow: 20 l/min
Pressure: 20 bar
Fluid temperature: 60 °C

Three-diaphragm pump with reinforced Polypropylene circuit, Kynar/AISI 316 valves (LFP version), AISI 316 diaphragm mounting components, Viton seals. Version: SP (cylindrical with shaft key), CR (reduction gearbox ...

Flow: 5 l/min
Pressure: 2 bar - 7 bar
Head: 70 m

New pump line with a brand new designing that offers reinforced pumping potentials. The updated designing provides even bigger performance provided with economy Benefits • Optimal performance • Economical air consumption, ...

Flow: 0 m³/h - 42 m³/h
Head: 1.5 m - 16 m
Power: 0.75 kW - 1.5 kW

... fluids. It is also prohibited to position or to remove the pump by the electric cable. Maximum temperature of the pumped fluids: - Continuous duty: 50°C. Minimum pumping level: 10 cm. above the pump body. ...

... setting of extremely small pressures. The technical data are based on an air inlet pressure of 8 bar. The pumps of course also function perfectly at low pressures. Krautzberger diaphragm pumps ...

Flow: 0 m³/h - 54 m³/h
Head: 0 m - 16 m
Power: 0.5 kW - 2.6 kW

... control can be connected. Maximum cable length of the pumps is 10 m. 3-phase pumps with level control (US 151 DS, US 152 DS and US 251 DS) have a CEE-Plug with phase inverter. The sewage pumps ...

Flow: 0 m³/h - 60 m³/h
Head: 0 m - 50 m
Length: 330 mm - 800 mm

... the range. There is also a model with a special flange support for hydraulic motors for installation on tanker trucks. These pumps are suitable for transporting various types of liquid, such as oil, wine, liquors and ...

Power: 0.37 kW - 4,500 kW

4” rewindable oil filled submersible motors characterized by high torque, strong mechanical structure, high reliability. Suitable for vertical and horizontal operations.

Flow: 8 m³/h - 260 m³/h
Power: 0 kW - 15 kW
Fluid temperature: 40 °C

... motor and water pump assembly into one, with simple structure, convenient installation remove, cover a small area, easy to use and maintain, safe and reliable operation, no water polluted, etc. Use Condition: The ...

Flow: 0.43 l/min - 30 l/min
Pressure: 465 psi - 42,500 psi
Width: 180 mm

... liquid pump for pressure testing, chemical injection and hydraulic power. Compact in size, minimal weight and ability to operate in many environments. Hydratron AZ-1 Single Acting Air Driven Liquid Pump ...

Flow: 20 m³/h - 125 m³/h
Pressure: 16 bar
Head: 20 m - 125 m

... base with the motor. How can centrifugal pump pump oil？The support of LQRY series waste oil transfer pump adopts the structure of double-end ball bearing support. The front end is ...

Flow: 55, 70 l/min
Pressure: 8 bar
Head: 0 m - 70 m

1/2'' (12.7 mm) Alumınıum Body Dıaphragm Pump Maximum Capacity : 55 lt/min Fluid Inlet-Outlet : 1/2'' NPT Max. Fluid Outlet Pressure : 8 Bar Housing Material : Aluminium Center Section Material : Polypropylene Diaphragm ...