Lubricant pumps

Flow: 0 m³/h - 60 m³/h
Head: 0 m - 50 m
Length: 330 mm - 800 mm

... the range. There is also a model with a special flange support for hydraulic motors for installation on tanker trucks. These pumps are suitable for transporting various types of liquid, such as oil, wine, liquors and ...

Power: 0.37 kW - 4,500 kW

4” rewindable oil filled submersible motors characterized by high torque, strong mechanical structure, high reliability. Suitable for vertical and horizontal operations.

Flow: 8 m³/h - 260 m³/h
Power: 0 kW - 15 kW
Fluid temperature: 40 °C

... motor and water pump assembly into one, with simple structure, convenient installation remove, cover a small area, easy to use and maintain, safe and reliable operation, no water polluted, etc. Use Condition: The ...

Flow: 0.43 l/min - 30 l/min
Pressure: 465 psi - 42,500 psi
Width: 180 mm

... liquid pump for pressure testing, chemical injection and hydraulic power. Compact in size, minimal weight and ability to operate in many environments. Hydratron AZ-1 Single Acting Air Driven Liquid Pump ...

Flow: 20 m³/h - 125 m³/h
Pressure: 16 bar
Head: 20 m - 125 m

... base with the motor. How can centrifugal pump pump oil？The support of LQRY series waste oil transfer pump adopts the structure of double-end ball bearing support. The front end is ...

Flow: 55, 70 l/min
Pressure: 8 bar
Head: 0 m - 70 m

1/2'' (12.7 mm) Alumınıum Body Dıaphragm Pump Maximum Capacity : 55 lt/min Fluid Inlet-Outlet : 1/2'' NPT Max. Fluid Outlet Pressure : 8 Bar Housing Material : Aluminium Center Section Material : Polypropylene Diaphragm ...

Flow: 0.1 m³/h - 300 m³/h
Pressure: 0 bar - 48 bar

As sludge transfer pumps, the K range is high performance industrial progressing cavity pumps. This PCP, available in block or long coupled configuration, can be manufactured in different materials including ...

Flow: 5,000 m³/h
Head: 1,200 m
Fluid temperature: 200 °C

The pump shell is separated horizontally on the axis line, the upper part is the pump cover, the lower part is the pump body, the suction inlet and outlet are on the pump ...

Flow: 600 l/min
Pressure: 0.001 Pa
Power: 9.6 kW

The portable/mobile/ hand-carried fire pump pompa air api portabel Bomba contra incendios is composed of 4-stoke engine, priming device and centrifugal water pump. It’s a kind of multi-purpose pump, ...

... plate frame filter press and other equipment. The STD series screw pump is flange connection reducer motor direct-linked structure,which is compact and economical. STD Series screw pump ...

Flow: max 1200.0 us gal/min
Pressure: max 8.0 bar
Head: 310'00"

QC Series Centrifugal pumps are built and designed in compliance with 3A Standards, with the following characteristics:• Open Impeller• Volute casing with central suction• Fittings: Clamp (standard), Flange, NPT thread, ...

Flow: 0 m³/h - 30 m³/h
Head: 0 m - 50 m
Height: 226 mm - 960 mm

Summary of pneumatic air operated diaphragm pump QBY pneumatic air operated diaphragm pump is the one of the most innovative pump. For all kinds of corrosive liquid, with particles, ...

Flow: 0 l/min - 820 l/min
Pressure: 0 bar - 50 bar

Pumped Liquid Hydraulic oils, synthetic hydraulic liquids, native oils, lubricating oils Main Fields Of Application For generation of pressure in oil-hydraulic systems, lubricating oil supplying, general industrial ...

Flow: 330 m³/h - 48,000 m³/h
Power: 0.37 kW - 15 kW
Fluid temperature: -20 °C - 150 °C

... delivered to the outlet. With this circulation, the medium (material) is delivered through the pump continuously. Universal cam and rotor transfer pump is suitable to tenderly transfer high-viscosity ...

Flow: 430 m³/h
Pressure: 10 bar
Head: 90 m

RN pumps Centrifugal pumps with closed impeller according to EN 733 norms. Discharge sizes from DN 32 to DN 150. Use RN pumps can handle clean and non-aggressive liquids for the pump ...

Flow: 0 us gal/min - 6,600 us gal/min
Pressure: 0 psi - 150 psi
Head: 0'00" ft - 300'00"

TYPE MC Horizontal single-stage centrifugal pump in back pullout design. Pumping of abrasive and corrosive liquids All components which are in contact with the liquid are made of SICcast Suction flange: Axial Discharge ...

Fluid temperature: 0 °C - 120 °C

... High Temperature QED’s special AutoPump® AP4 Ultra models are available to pump fluids up to 250 ºF (120ºC), and are already proven in service. These high temperature pumps use the highly reliable AutoPump ...

Pressure: 1 bar - 200 bar

... metering pump. With extremly small clearances and an optimal gear geometry the ADP has a very high volumetric efficiency also at difficult combinations e.g. high pressure together with low turning speed ...

Flow: 0 m³/h - 400 m³/h
Pressure: 0 bar - 16 bar
Head: 0 m - 150 m

The chemical process pump "GCP" is widely used for chemical, Petrochemical industries. Media which can be easily pumped are Acids, Caustic, Amonia, Phoshate, Dyes, Oils, Solvants, Alcohol, Aromatics etc. Also suitable ...

Flow: 0 l/h - 43,800 l/h
Power: 0.37 kW - 3.5 kW

Stainless steel low-speed rotary pumps with flexible impeller; particularly suitable for transfer of delicate, fragile and viscous fluids, also with solid parts in suspension. Our pumps are widely used ...

Flow: 28 l/min - 148 l/min
Head: 15 m - 17 m

The best solution for suction and transfer of liquids, thanks to the strong self-priming capacity and the ability to run even with discontinuous presence of the liquid in the suction. The ECC series, made of brass CB754S with DC motor ...

Flow: 350 m³/h
Pressure: 16 bar
Head: 100 m

... the seal chamber on these pumps. The ZN series are centrifugal, single stage, horizontal shaft pumps. They have a self-balancing impeller (the balance is achieved through the rear end impeller blades).The ...

... Please note that the media temperature shouldn't surpass 70° C for common pump and 300° C for anti-high temperature oil pump. The pump has safety valve itself for protection when the ...

Flow: 160 m³/h - 306 m³/h
Pressure: 2 Pa
Power: 5.5, 7.5 kW

... Use built-in forced fed oil pump to ensure long-term continuous operation of the pump under normal pressure. ·Adopt air-cooled, oil-cooled, water-cooled and other cooling methods to ensure a good cooling ...

Flow: 18.3 l/min - 1,200 l/min
Pressure: 300,000 Pa - 1,450,000 Pa
Power: 1,500 W - 22,000 W

... built in.SS304 for option. Hot Tags: Kcb Gear Pump, China Kcb Gear Pump, Kcb Gear Pump factory, Kcb Gear Pump manufacturers, Kcb Gear Pump suppliers, ...