Lubricated pumps

Flow: 0 m³/h - 700 m³/h
Pressure: 0 bar - 260 bar
Fluid temperature: 280 °C

Leistritz screw pumps in the L3 range are three-spindle, single-volute, self-priming displacement pumps. They are used to transport non-abrasive lubricating fluids. Series: ↗ low pressure: L3NG/L3NT ↗ ...

Flow: 0 m³/h - 250 m³/h
Pressure: 0 bar - 16 bar
Head: 0 m - 65 m

... Reliability: the pump is equipped with reliable oil lubricated bearing bracket, especially developed to be suitable even under heavy duty service. Design: UTN range share the same hydraulic design ...

Flow: 0 us gal/min - 200 us gal/min
Head: 0'00" ft - 55'00"
Power: 0.25 ch - 3 ch

... maintenance-free pump and motor design. This design provides a worry-free, install-and-forget operation. The design incorporates the patented XL-11® precision-crafted bearing system. Advanced fluid passage design and ...

Pressure: 16 bar

... hydraulics •Minimum service costs through minimised number of components and no setting work •Maximum reliability, as the pump does not require O-rings Specifications •Design - Long life grease or oil bath lubrication •Nominal ...

Flow: 0 l/min - 6 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m

MIDGETBOX diaphragm pumps are characterized by exceptional performance, power and strength, making them ideal for pumping liquids with high apparent viscosity even if containing suspended solids. Especially suitable in ...

Flow: 600 m³/h
Pressure: 16 bar
Power: 200 kW

... operation. Features Back pull out design Mounting dimensions and duties as per EN733 Standard Wide hydraulic ranges Pre lubricated sealed bearing ensures long life Application Water supply Irrigation Pressure ...

Flow: 0.17 m³/h - 41 m³/h
Pressure: 10, 9 bar
Fluid temperature: -40 °C - 150 °C

... flush line from pump discharge to remove solids build-up, ensuring longest possible seal life (note: no flush line on F & FH sizes). The grease-lubricated bracket bushing is not contacted by the pumped ...

Flow: 0 l/min - 1.6 l/min
Pressure: 10 bar - 200 bar
Fluid temperature: -30 °C - 130 °C

The HPP 200 is a very compact high-pressure pump that is particularly suitable for pressurization when pumping low-viscosity liquids. The basic version of the pump is designed for a continuous ...

Flow: 3.2 m³/h - 1,500 m³/h
Head: 5 m - 80 m
Power: 1.1 kW - 400 kW

... rigid sleeve coupling is used to connect shaft with easy dismantling. The gliding bearing can be lubricated by cooling water or self-cooling lubricated; The outlet flange is flexible half symmetric ...

Flow: 1, 1.5, 2.5, 3.5, 4.5 m³/h
Pressure: 40 bar
Power: 4 kW

... stages : : 6 Bearings : Sleeve bearing at the pump end, bail bearing at the drive end Lubrication : Plain bearing at the pump end lubricated by the pumped product, bail bearing at the ...

Flow: 0.15 m³/h - 30 m³/h

Rotary Gear Pump -Manufacturer, Expoter, Supplier Fluid Tech Systems offer “ROTOFLUID” brand gear pump Model “FT” (Rotary Gear Pumps) which is self priming, foot mounting type positive ...

Flow: 0 m³/h - 1,500 m³/h
Fluid temperature: 90, 100 °C

The pumps of the APM series are high pressure Multicellular Centrifugal Pumps. These pumps are used to transfer clean or slightly dirty fluids that do not contain abrasive materials. The ...

Flow: 0.9 m³/h - 420 m³/h
Head: 0 m - 642 m

... incorporation of the pump unit is simplifi ed by the linear position of stub pipes in the hermetic jacket space requirement is minimized due to compact design standardized design of the connections ...

Flow: 1,250 m³/h
Pressure: 10 bar
Head: 65 m

Self-Priming Centrifugal Pumps, with semi-open impeller, suitable for dirty or waste water applications. Solid passage size limit to 75mm (3 inches). The internal construction allows air to separate from water to achieve ...

... background, T-Series pumps address many of the shortcomings commonly found in today's air-driven liquid pumps. Premium T-Series pumps are built to run at their maximum rated pressure ...

Flow: 1,817 m³/h
Pressure: 150 psi
Head: 914 m

... , centrifugal pump designed mainly to handle up to 6% paper stock, water and other fluids found in all industrial, mining, steel, chemical and food process applications. Overview CHARACTERISTICS Single stage, overhung ...

Flow: 1 m³/h - 2,500 m³/h
Pressure: 0 bar - 40 bar

... contact with each other, but leave a small gap. Impurities in the medium do not cause direct wear (except flushing) on the screw teeth. Except for some small displacement pumps (2w.w4.0 ...

Compact structure, smooth and steady flow due to good design of hydraulic part; Forgings are used for key parts of pressure boundary to ensure product quality; KSB patented wear-resistant ceramic bearing can be ...

Pressure: 0 bar - 25 bar

Lubricating oil pumps / Grease pumps Gear pumps or Rotary lobe pumps Steimel lubricating oil pumps are suitable for use in oil supply equipment for ...

Flow: 0 m³/h - 3,000 m³/h
Pressure: 16, 25 bar
Head: 0 m - 180 m

... disassembly of the rotor group for maintenance or repair without distorting pump alignment and suction and discharge piping. • Impeller is double suction. • This feature increases pump suction performance ...

Flow: 10 m³/h - 40 m³/h
Pressure: 40 bar

... Gearbox coupled Pumps . Materials of the cold end and oil used in the gearbox are suitable for pumping oxidizing gases such as liquid oxygen (LO2) and liquid nitrous oxide (LN2O). Used as ground or truck mounted pump ...

Flow: 5 m³/h - 220 m³/h
Pressure: 40 bar
Head: 30 m - 400 m

... impeller. The remaining thrust can be borne by large-sized bearings. · Pumps with exchangeable wear rings are available upon request. · The pump series consists of 5 sizes. · Pump ...

Flow: 0 m³/h - 1,000 m³/h
Pressure: 30, 63 bar
Head: 0 m - 550 m

Multistage Multi Outlet Pumps are a design of pump which have a single inlet, but twin outlets delivering two discharge pressures simultaneously. They are utilized in high rise buildings as fire suppression ...

Flow: 1,000 m³/h
Pressure: 5 MPa
Fluid temperature: 30 °C - 230 °C

... are located on the same horizontal line, vertical installation, small footprint, easy installation. The pump has a separate bearing frame and the bearings are grease lubricated. The ...

Flow: 0 us gal/min - 750 us gal/min
Head: 540'00"
Power: 500 ch

The Magnum XP pump is single-stage, single-suction centrifugal mud pump. It is suitable for handling big capacity of abrasive, corrosive and plain tough slurries. The small footprint ...