Lubricated pumps

Flow: 0 m³/h - 270 m³/h
Head: 0 m - 95 m
Power: 2.2 kW - 22 kW

The pump casing shall be of cast iron grade of FG 260 as per IS 210/ISO 186 with axial suction and radial discharge port, dynamically balanced impeller, steel shaft. The Pump shaft sealing shall be by ...

Flow: 6.66 m³/h - 12.6 m³/h
Head: 2 m - 26 m
Power: 4 kW - 7.5 kW

... prohibited to position or to remove the pump by means of the electric cable. Maximum temperature of the pumped fluids: - Continuous duty: 40°C; - Intermittent duty: 80°C. Minimum pumping level: 20 cm. above the pump ...

Flow: 0 m³/h - 570 m³/h
Pressure: 10 bar
Fluid temperature: -20 °C - 190 °C

... ratings over 30kW, but also available (on request) for smaller sizes, it is coupled on the base to a separate support with oil-lubricated double bearing.

Flow: 0 us gal/min - 1,450 us gal/min
Head: 0'00" ft - 110'00"
Power: 0.5 ch

This portable pump is perfect for boosting waterpressure, draining hot water tanks and general water transfer. Features include: One-piece cast aluminum pump and motor housing with integral carry ...

Flow: 20 m³/h - 125 m³/h
Pressure: 16 bar
Head: 20 m - 125 m

... . How can centrifugal pump pump oil？The support of LQRY series waste oil transfer pump adopts the structure of double-end ball bearing support. The front end is lubricated ...

Flow: 28 l/min - 266,880 l/min
Pressure: 7.5 psi - 20,000 psi
Power: 364 ch - 500 ch

JR500W pump is a horizontal single-acting reciprocating triplex plunger pump. Power end is self-lubricated by oil pump built onto the worm gear. Driven by worm pair, ...

Flow: 1 m³/h - 25 m³/h
Head: 9 m - 120 m
Power: 0.75 kW - 7.5 kW

Technical data Construction Vertical multi-stage close coupled pumps with suction and delivery connections of the same diameter and arranged along the same axis (in-line). All parts that come into contact with the ...

Flow: 430 m³/h
Pressure: 10 bar
Head: 90 m

RN pumps Centrifugal pumps with closed impeller according to EN 733 norms. Discharge sizes from DN 32 to DN 150. Use RN pumps can handle clean and non-aggressive liquids for the pump ...

Flow: 0 us gal/min - 6,600 us gal/min
Pressure: 0 psi - 150 psi
Head: 0'00" ft - 300'00"

TYPE MC Horizontal single-stage centrifugal pump in back pullout design. Pumping of abrasive and corrosive liquids All components which are in contact with the liquid are made of SICcast Suction flange: Axial Discharge ...

Flow: 600 m³/h
Pressure: 64 bar
Head: 400 m

... where the rotation is only allowed upon request. The impellers of these pumps arrive complete with balancing holes to lower axial thrust, and the shaft is backed by oil lubricated or grease roller bearings.

Flow: 0 us gal/min - 50,000 us gal/min
Head: 60 m - 210 m

Design Features of Hayward Tyler Vertical Turbine Pumps The VS range was designed specifically for the nuclear industry and offers three different impeller types. Each impeller type provides a different head-capacity ...

Flow: 1,379 m³/h - 3,060 m³/h
Head: 11 m - 63 m
Power: 0 kW - 1,200 kW

EHR Slurry Pump1. Frame Plate and Cover Plate: The outer casing is made of grey cast iron or ductile cast iron according to the working pressure, with split with split structure and blots connected，which ensuring security ...

Flow: 68.1 m³/h - 823.3 m³/h
Pressure: 175 psi

Cyclone Vertical Turbine Pumps Cornell Pump’s VT pump series (Cyclone) relies on our demonstrated superior hydraulics, in a submerged design. The proven quality of Cornell RB series ...

Flow: 0 m³/h - 550 m³/h
Head: 0 m - 110 m
Fluid temperature: 0 °C - 350 °C

... series Synthetic heat transfer media with low viscosities are delivered without any problems up to 350 °C Hydrodynamically lubricated sleeve bearing in SiC Low-wear impeller side chamber

Flow: 156 l/h - 1,458 l/h
Pressure: 4, 250 bar
Power: 0.18 kW - 0.75 kW

... bearing, fully lubricated in oil bath. Stroke adjustment can be carried with the pump at rest or in operation and it can be manual or automatic through automatic actuator driven by ...

Servo Piston Pump Shot Meter PVA’s SPP Servo Piston Pump system is the ideal choice for precise metered dispensing of heavily filled and abrasive materials. The SPP’s piston displacement design is equipped ...

Flow: 10 l/min - 250 l/min
Pressure: 70 bar - 250 bar
Fluid temperature: 25 °C - 90 °C

Three-es manufactures pumping sets with various flow and pressure characteristics, plug&play and optimised for any washing system. Each pumping unit is assembled using only high quality components. The ...

Flow: 720 l/h - 401,838 l/h
Pressure: 6, 16 bar
Fluid temperature: -20 °C - 250 °C

three-screw pumps consist of a broad range of low maintenance pumps for lubricating, non-abrasive and chemically inert liquids. 3S pumps are the best choise in many various industrial ...

Claw Pumps The new PA.155 Claw pumps create air volume and transfer it through the intake duct to the outlet duct by means of the rotation of two claw shaped rotors in a moulded chamber. The dry running ...