Male-female fittings

Diameter: 4 mm - 14 mm
Operating pressure: 16 bar

... 10/7,5; 10/8; 12/9; 15/12; 16/12; 18/14; mm Fittings threads metric cylindrical: M10x1; M12x1,5; M14x1,5; M16x1,5; M18x1,5; M22x1,5 BSP GAS: G1/8; G1/4 Conical: 1/8 NPTF; 3/8 NPTF Series 9000 fittings ...

Diameter: 4 mm - 12 mm
Operating pressure: 40 bar

Series 1000 rapid push-on fittings can be easily installed. The push-on locking nuts can be tightened both manually and with a spanner even in case of stiff tubes like the PA or the Hytrel Polyester. The special shape ...

Diameter: 22, 26 mm
Operating pressure: 1.5 bar - 12.5 bar

Protecting the welder near the blow torch SUPER-PARFLAM safety plugs at the inlet to the blow torch allows connection / disconnection without the need to shut off the cylinders. Two safety functions compliant with EN 730-1 and ISO ...

Diameter: 3 mm - 12 mm
Operating pressure: 0 bar - 16 bar

Nickel-plated brass clean break coupling for thermal management SCG SCG non-spill quick couplings are perfectly adapted to connect cold plates with manifolds in thermal management projects. This compact quick disconnect is perfectly ...

Diameter: 24 mm
Operating pressure: 0 bar - 10 bar

Symmetrical full flow cooling coupling TDU The TDU 24 is a symmetrical coupling that ensures a direct flow of fluid for an optimal flow rate and pressure drop ratio of cooling applications. The specific locking system is independent ...

Diameter: 6.35 mm - 25.4 mm
Operating pressure: 20,000 psi

Cone and Thread Adapters and Couplings | #20M64K6-OP Male/Female Adapters create system flexibility by providing a one piece fitting with two different end connections. Item Information Parker ...

Diameter: 0.125 in - 2 in

... constant tension between the fitting body and fitting nut. CPI™ tube fitting are manufactured from heat code traceable 316 stainless steel. Other materials include 6Mo, Alloy 825, Alloy ...

Diameter: max 2.0 mm

Parker's two ferrule compression fittings, A-LOK® Tube Fittings are designed for leak-free connections in process instrumentation and industrial applications. Available in a wide range of materials, they ...

Diameter: 1.2 mm - 7.5 mm

Adjustable position 90 degree elbow fitting, from M3x0.5 external thread to M3x0.5 internal thread.

Adjustable position tee fitting, from M3x0.5 external thread to two M3x0.5 internal threads. Replacement O-Rings O-Rings in all available materials for both body and stud seals.

Diameter: 10 mm - 32 mm

Adjustable position cross fitting, from 10-32 external thread, to three 10-32 internal threads. Features Beswick’s trademark O-ring seal design provides a leak-tight joint.

Diameter: 0.13 in - 2 in
Operating pressure: 15 bar - 75 bar

... consist of steel, stainless steel, and brass. The seal material comprises of FKM, NBR, and EPDM. It also has a newly added male thread.

Diameter: 14 mm
Operating pressure: 7 bar

... efficient performance and are long-lasting. The socket is also compact with a 14mm OD sleeve and valve built into it. The couplings are compatible with a wide array of ends such as male/female ...

Diameter: 4, 6, 0.13 mm
Operating pressure: 10 bar

... a body made of plastic. It is ergonomic as the plug only needs to be pushed in to the socket for connecting, and a button is pushed for disconnecting. Both socket and plug have built-in valve types ...

Transition piece for transition from high-pressure internal thread to NPT external thread.

Transition piece for transition from high pressure internal thread to G external thread.

Transition piece for transition from high-pressure internal thread to G internal thread.

Diameter: 6 mm - 100 mm
Operating pressure: 16, 20 bar

MALE / FEMALE 90° ELBOW - STAINLESS STEEL 316 Model : 5246)

Diameter: 8 mm - 50 mm
Operating pressure: 20, 16 bar

MALE / FEMALE UNION ELBOW - STAINLESS STEEL 316 (Model : 5251)

Diameter: 15 mm - 108 mm
Operating pressure: -0.95 bar - 16 bar

90° MALE / FEMALE ADJUSTMENT ELBOW TO PRESS - M TYPE EXAMPLE OF ORDER : 641102-15

Diameter: 3, 4 in
Operating pressure: 8 bar - 230 bar

VAPOR RECOVERY ADAPTOR WITH IN LINE DEFLAGRATION FLAME ARRESTER It's a Protection System with ribbon coil: deflagration in-line flame arrester in according with Directive 20H/34/EU and harmonized standard EN ISO 16852:2016 - Used for ...

Diameter: 2, 3 in
Operating pressure: 0 bar - 8 bar

It's a Safety accessory in according with Directives ATEX 2014/34/EU and PED 2014/68/UE. The dry quick coupling is used to prevent any possible leaking during the process of transferring hazardous fluids in différent fields of application ...

Diameter: 119 mm
Operating pressure: 0 bar - 8 bar

It's a Safety accessory in according with Directives ATEX 2014/34/EU and PED 2014/68/UE. The dry quick coupling is used to prevent any possible leaking during the process of transferring hazardous fluids in différent fields of application ...

Diameter: 3 mm - 14 mm
Operating pressure: 20 bar

The MA is our “Automatic push-in fitting” line. It enables quick connections with calibrated plastic hoses at any time, at any stage of the pneumatic circuit and by a simple hand movement. The connection and the fitting ...

Operating pressure: 25 bar

The CX is a “push on“ fitting made of AISI 316L, completely free of Orings since conceived for heavy duty applications involving high temperatures, aggressive fluids and where also FPM Oring would not be suitable.

Operating pressure: 20 bar

Push in fittings made of a materials "MIX", brass and Technopolymer. This line offers a more compétitive priced fitting then the whole brass version, without affecting the fitting performance. Recommended ...

This Union comes with male thread on one end and a female thread on the other, Permitting an array of combinations and lengths. • 316 Stainless Steel Male by Female ...

Diameter: 0.25, 0.125, 0.5, 0.375 in
Operating pressure: 150 bar

Stainless steel connections – Pure stainless steel fitting – For challenging applications Operating temperature -20°C to +150°C Materials Fittings made of stainless steel 1.4404 (AISI 316L) Seals ...

Diameter: 0.25 in - 2 in
Operating pressure: 0 bar - 60 bar

– For various applications – For connections from M5 to 2“ – With nickel-plated or polished surface Operating temperature max. +150°C Materials Brass (CW614N/ CW617N) nickel-plated and polished Thread DIN 3852 DIN 3858 Medium ...

Diameter: 1.6 mm - 11.5 mm
Operating pressure: 0 bar - 7,000 bar

MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 ...

Diameter: 3.2 mm - 17.5 mm
Operating pressure: 0 bar - 1,400 bar

MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 ...

Diameter: 3 mm - 20 mm
Operating pressure: 1,050 bar

MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 ...

Exd II C Reducers are used to provide a means of attachment between apparatus, pipes and mouthpieces of dissimilar thread forms. Threads: - BSP TAPER BS 21 - NPT (ANSI B1.20.1) Materials: - Mild steel zinc plated - ...

Exd II B 3 pieces Unionsare composed of three elements that screw on and turn independently, thus allowing the connection of rigid parts. Threads: -BSP TAPER BS 21 -NPT (ANSI B1.20.1) Materials: -Mild steel zinc plated -Stainless steel

Diameter: 11 mm

The system variacor®, patented internationally, allows, with these two joint-turning, to make flexible and directional all the rigid and semi-rigid pipes, whatever is their natures and applications. Cost saving : no more premature ...

Diameter: 11 mm
Operating pressure: 40 bar

Eliminates premature wear of the supply hose. Reduces muscle strain caused by the rigidity of the flexible, easy washing in places with difficult access. Durable, thanks to mechanical stainless steel components and Aluminium ...

Diameter: 7, 16, 11 mm

Essential for all the fields of maintenance and mechanical repair, cars, trucks, assembly lines... Also adapted to all the fields of maintenance and repair in general mechanics, truck garage, carrier, construction industry, shipyards, ...