Port size: 15 mm
... recirculating cold water system with both inlet and outlet branch connections John Guest grey push-fit acetal cooling manifold fitting is intended for use on a 15mm water recirculation system. A 4mm restriction between ...
Operating pressure: 1,000 psi
... standard with MBC Series • Adapter plate for mounting on flat surfaces available for all manifolds • Make precise, professional installations easy ANVER quality manifolds have been designed to provide ...
Operating pressure: 16 bar
Port size: 25, 20 mm
Main advantages - Separation system for the condense - Easiness and quickness of assembling - Reliability and security - High flow rate - Wide range of accessories - Fire resistance: The system does not stroke or propagate any ...
Operating pressure: 700 bar
Port size: 0.38 in
Manifold, 4 ports - including Manometers, 4 needle valves w/pressure gauges, 3/8" connection Adjust each port manually, for the correct delivery of fluid for each application
Operating pressure: 0 Pa - 1,000,000 Pa
These block parts can be assembled freely into a variety of manifold blocks for concentrated branching. Even with about a half the size of steel piping, assuring the same flow rate. The appearance dimension is as ...
Operating pressure: 0 MPa - 1 MPa
Port size: 6, 8 mm
... series: fixed air outlet direction Any number of Blocks can be added. Best suitable when used with cylinders. The manifold can be used for circulating cooling water of about 40℃. Make sure to use PISCO Insert-ring ...
Operating pressure: 0 bar - 210 bar
Port size: 11.5 mm - 19 mm
Plates represented in the following catalogue have fixing holes in compliance with DIN 24340 standards in size NG6 and valve body cavity SAE. The products are made of aluminium alloy 6082-T6 in compliance with EN AW 6082 AlSi1MgMn and ...
EUROFLUID HYDRAULIC SRL
Operating pressure: 0 bar - 350 bar
Port size: 11.5 mm - 45 mm
The sub-plates represented in the following catalogue have fixing holes in compliance with DIN 24340 standards, with sizes NG6 - NG10- NG16-NG25. The products are made of cast iron GG25, according to UNI EN 16482 standard. The O-ring ...
EUROFLUID HYDRAULIC SRL
Operating pressure: 0 bar - 300 bar
CUSTOMIZED ALUMINIUM MANIFOLDS Available Alloys Alu 2011,6082,7075,2017,6026LF. Possibility to include surface treatment as Natural anodizing , Colored anodizing or Hard black anodizing Possibility to make some assembly ...
EUROFLUID HYDRAULIC SRL
VM-3 and VM-5 series valve manifold assembly functions as a mechanical solution to relative pressure transmitter system. Specifically, it executes tasks such as initializing a transmitter unit, and setting the zero position ...
VM-3 and VM-5 valve manifolds are utilized with pressure transmitters. These valves allow operations to be carried out on the transmitters, like the initiation of a transmitter operation or adjusting a zero dimension ...
The VM-2, which is manufactured by Aplisens, is a 2-valve manifold. This 2-valve manifold has a body made of 316-grade stainless steel. It has an input measurement of 1/2NPT F. and an output measurement of 1/2NPT F.
... lines (also known as vacuum gas manifolds) are a commonly used piece of chemistry apparatus originally developed by Wilhelm Schlenk. Schlenk lines basically consists of a dual manifold with several ...
Operating pressure: 3,000, 5,000 Pa
... devices in the field up to 5000psi Brass & Stainless Steel Options QTCM Brass Manifold - for pressure calibration from 0 to 3000 psi QSCM Stainless Steel Manifold - for higher pressure calibration ...
Ralston
Operating pressure: 60 bar
Port size: 0.13, 0.25, 0.38, 0.5 in
Standard fittings Type 100 – Brass fittings – High resilience – Nickel-plating for corrosion protection Operating temperature max. +150°C Dependent on the temperature range of the tube/pipe used Dependent on the pressure ...
Port size: 0.25 in
... removed as per need according to future requirements, in case customer wish to add on extra valve Inlet & exhaust on the manifold
This manifold is designed to incorporate a 0-8mm high vacuum valve as the vacuum shut-off. The front tube is for inert gases (17mm O.D.), with a 10mm hose connection. The rear tube is for vacuum (22mm O.D.), with two ...
Synthware glass
Forward facing 0-8mm high vacuum valves allow easy operation of manifoldinside of a fume hood. Main parts are spaced 100mm center to center.Adapter components or stoppers are available below, others need to be ordered separately. M330804 ...
Synthware glass
Port size: 8 mm
With 14/20 outer joint at the center to fit a rubber septum for keeping syringes under an inert environment, cutting down on the number used. Main tube is 22mm O.D. with right hose connections (10mm). Delivery ports have 8mm hose connections. Accessories: S181530 ...
Synthware glass
Port size: 0.75, 1 in
The DeltAll system has been specifically developed for the following applications: Distribution of both hot and cold water in sanitary applications Low temperature heating systems (with radiant panels) High temperature ...
Unidelta S.p.A.
Aircomp by Stampotecnica
... 10,000psi (670bar)rated. The two-valve isolating and venting manifold used mainly in gauge and static instrument applications such as pressure switches, pressure transmitters and manometers. The manifold ...
Alco
The stainless steel manifold for three or six filtration units is fitted with stainless steel units. The apparatus can be autoclaved and sterilized by dry heat at up to 180°C. Suitable only for vacuum operation. If flushing ...
Operating pressure: 0 bar - 210 bar
CETOP3 SINGLE MANIFOLDS BS3 SINGLE MANIFOLDS CETOP3 FLANGED WITH LATERAL USERS AND RELIEF VALVE The aluminum bases BS3 with side connections allow to assembly a single CETOP 3 solenoid valve. The ...
Oleoweb Srl
Operating pressure: 0 psi - 10,000 psi
Port size: 0.16 in
Combines isolating and venting in a single valve, eliminating the need for tubing and fittings Block valve isolates the downstream process fluids and the bleed valve exhausts upstream fluids enabling static pressure transmitters, ...
NOSHOK
Operating pressure: 5,000 psi - 25,000 psi
Port size: 3, 2 in
Cameron choke manifold systems manage well pressure fluctuations encountered during drilling by diverting flow through a series of valves and chokes. Cameron was the first to provide 20,000-psi and 25,000-psi choke and ...
Operating pressure: 0 psi - 3,500 psi
Port size: 0.12 in
sets the industry standard for quality, reliability, and ease of use features. It was the original modular-style series progressive divider valve–and is still the best! For use with mobile, industrial, food and beverage, wind, and ...
Operating pressure: 28 bar
Port size: 32, 38, 13, 19, 25 mm
... Division offers the M1 Inline Manifold and the M2, M3 and M4 Dual Stop Manifolds for use in conjunction with their full line of Safety Relief Valves. Parker's Refrigerating Specialties Division offers ...
Operating pressure: 0 Pa - 300 Pa
The ByWire modular system is composed by a wide range of standard modules that, properly assembled, obtains the logic circuit function required. This system solves even the more complex hydraulic demands. ByWire elements can be electro-proportional ...
Operating pressure: 414 bar
Port size: 0.25 in
... liquid or gas service. -Fully self draining. -Equalize and vent valves fitted with an anti tamper facility. -Choice of manifold configurations to suit the application: AS6 2/1 - Double isolate, equalize, vent AS6 2/2 ...
Operating pressure: 2,000 psi
Port size: 10 mm - 32 mm
... original Brass manifold features two 1/8 NPT (F) input ports and six 10-32 (F) output ports. Simply install fittings into the ports to produce an organized and convenient method of supplying multiple lines from a single ...
Bimba
Port size: 32 mm - 125 mm
Long radius manifold designed to allow vertical mounting of FL/FA filter (when blower is in horizontal plane).
Please specify:
Help us improve:
remaining