Manual pumps

Flow: 40 l/min
Power: 0.75 kW
Fluid temperature: 60 °C

... a suction process. With Sealed classic drum or container pumps, it is not possible to empty full containment IBC’s, as there are no openings for inserting a drum pump. A self-priming pump ...

Flow: 750 l/min
Head: 35 m
Fluid temperature: 95, 50 °C

Stationary circulation and filter pump with impeller for flow rates of up to max. 750 l/min and extreme usage conditions The new F 728 series from FLUX-GERÄTE GMBH is a new generation of centrifugal immersion pumps. ...

Flow: 240 l/min
Head: 30 m
Output diameter: 40 mm - 41 mm

... container pump F 430 TR is ideal for conveying media from IBCs, tanks and other containers with low level outlet. E.g. if a tank is not accessible from the top, or if the spatial conditions do not allow use of a vertical ...

Flow: 0 l/min - 65 l/min
Head: 0 m - 12 m
Power: 260 W

The B2 Battery Drum pump is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister or hobbocks. The pump is ...

Flow: 0 l/min - 80 l/min
Head: 0 m - 8 m
Power: 260 W

The B2 Battery Drum pump is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister or hobbocks. The pump is ...

Blue color pump with polypropylene/EPDM seals. Can be used with AdBlue/DEF. Lever action pumps with a unique toggle mechanism that provides very a smooth operation. Pumps are manufactured ...

Lift action pump for chemical products, 205 litre drums with nylon covered piston and PTFE seals. 1000 mm suction tube, Ø 60 mm bung adaptor with three screws and outlet spout. Black pump with yellow ...

Flow: 4,000, 12,000, 1,500 l/h
Pressure: 6 bar
Fluid temperature: 80 °C

Eccentric Disc Pumps have been specifically designed for transferring sensitive products. These self-priming pumps feature quick and easy hand cleaning as well as clean-in-place (CIP) ...

Flow: 0 m³/h - 50 m³/h
Pressure: 0 bar - 16 bar
Fluid temperature: 180 °C

... , eliminating the need for manual alignment of the pump and motor. Why Choose Our Internal Gear Pumps? Superior Efficiency: Engineered for low-to-medium viscosity liquids, ensuring ...

Flow: 156 m³/h
Pressure: 15 bar

... and gear design - The complete pump is made of stainless steel. The shaft bearings are integrated into the rotorcase. Large shaft diameters and strong bearing design results in small shaft deflections ...

Input diameter: 0.75 in

Pump Material: Polypropylene Shaft: Polypropylene Seals: depending on the support Range: approx. 0.3 l/stroke* Hose connection: ¾” The telescopic suction tube is adjustable from 500 to 950 mm and has a max diameter. 34mm.

Flow: 0.3 l/s

Pump material: PVDF Seals: PTFE Flow rate: 0.3 l/rev* Suction hose length: 3 x 35 cm Pump complete with discharge arc and adapter for G 2" drums. Regular lubrication with PTFE is required.

Flow: 0.25 l/s
Input diameter: 53 mm

Material: cast iron pump body Seals: NBR Suction hose length: 1000 mm Therefore suitable for smaller containers and 200 liter drums. Pump complete with discharge arc and adapter for G 2" drums.

Pressure: 3 bar

Two-outlet piston pump with pin valves for setting the flow. Placed in a central position with respect to the two out-let lines, it allows system extension. It may operate on a single line while the other line is plugged, ...

Pressure: 5 bar

Positioned in the center of the installation compared to the two lines it allows to improve the length of the facility. It can be used with a single exit, another exit is closed by a special flip. Key features: - Output : 2 cm³ per ...

Pressure: 3.3 bar

Pump for applications with built-in reservoir and easy operation: simply pull the handle upwards with a quick movement and then release to deliver lubricant. Pump is applied with a seal on the flange ...

Flow: 112 l/min
Pressure: 1,500 bar
Power: 147 kW

... Z-series is a second shaft end which allows another pump to be connected and can double the performance if required. All gearboxes of WOMA pumps have an integral oil cooling system. Additionally, all ...

Flow: 133 l/min
Pressure: 1,500 bar
Power: 175 kW

... Z-series is a second shaft end which allows another pump to be connected and can double the performance if required. All gearboxes of WOMA pumps have an integral oil cooling system. Additionally, all ...

Flow: 319 l/min
Pressure: 1,500 bar
Power: 236 kW

... Z-series is a second shaft end which allows another pump to be connected and can double the performance if required. All gearboxes of WOMA pumps have an integral oil cooling system. Additionally, all ...

Flow: 50 l/h - 990 l/h
Pressure: 0 bar - 10 bar
Weight: 38, 48 kg

... Standard versions are with the head located on the left-hand side. dosing pumps with the head on the right-hand side can be supplied. Duplex dosing pumps are available with the head combinations shown ...

Pressure: 0 bar - 4,000 bar

... -speed hand pumps for very high pressure up to 4000 bar PMS-PDS Series are the FPT hand pumps on very high pressure. • Hand pumps with ...

Pressure: 0 bar - 3,000 bar

... high pressure hydraulic hand pumps 1600 bar – 3000 bar and 4000 bar. • Manual pumps for very high pressures, light, compact and easy to carry, made ...

Pressure: 1,600 bar - 4,000 bar

... high pressure hydraulic hand pumps 1600 bar – 3000 bar and 4000 bar. • Manual pumps for very high pressures, light, compact and easy to carry, made ...

Flow: 10 l/min

... solvent pump engineered by Burkle, is a hand operated barrel pump, suitable for the withdrawal of organic solvents and flavoring components. This device features a gas tight construction ...

Flow: 20 l/min

... air filters for ultra-pure drawing-off available as accessory Barrel pump for solvents with discharge hose and stopcock made of stainless steel/PTFE. Solvent pump foot operated ...

Flow: 4 l/min - 30 l/min

OTAL container pumps are characterized by its basic stopper system that can be used in most common containers. During the pumping process, only the tube comes in contact with the liquid. This means that liquids that are ...

Pressure: 700 bar

• Easy to carry – Made of aluminum. • Ergonomic – Easy grip pump lever and relief knob. • High Speed – The pumps have 2-step function that automatically switches between high speed and high pressure. • ...

Pressure: 1,000, 1,500, 2,800 bar
Weight: 7.9 kg

... tensioner. • Oil reservoir in aluminum and valve made in steel (AHP705 and UHP2800). • Ergonomic – Easy grip pump lever and relief knob. • The pumps have a 2-step function that automatically switches ...

Pressure: 700 bar

... operated by hand or foot. • When operating with foot you get both hands free to hold the tool, (nut splitter, puller, cylinder etc) which is a great advantage for the operator. • Tank sizes from 0,75-3 liters. • Integrated ...

Flow: 5, 2.7, 0.9, 2, 1.3 m³/h

Bare semi-rotary manual pumps Descriptive Construction materials Body, cover and lever: cast iron Inner mechanism: brass Waterproofing: graphite braid NBR flange O-ring, Viton® ...

Flow: 2.7, 1.3, 2, 0.9 m³/h

Bare semi-rotary manual pumps Descriptive Construction materials Body, cover and lever: cast iron Inner mechanism: brass Waterproofing: nitrile O-ring Seal: nitrile O-ring, ...

Flow: 2, 1.3, 2.7, 0.9 m³/h

Bare semi-rotary manual pumps Descriptive Construction materials Body, cover: bronze Inner mechanism: bronze Lever: bronze (brass as an option) Flange: bronze threaded oval ...

Pressure: -950 mbar - 140,000 mbar

Pneumatic pressure test pump LMP 140 is a hand pump operated and designed to generate pressure range -950 mbar ... 100 /140 bar. 0,1 mbar pressure resolution. Build-in filters to protect from dirt and ...

Flow: 0 l/min - 1.5 l/min
Fluid temperature: -60 °C - 120 °C
Length: 210 mm

... tubing size based on the following chart. Support manual mode Support fully automatic cycle Semi-automatic cycle Manual start/stop Speed control Basic Parameters Current: 2A max Pump ...

Flow: 0.32 l/min - 6 l/min
Power: 150 W
Fluid temperature: -20 °C - 60 °C

... Semi-automatic cycle ★ Manual start/stop ★ Positive/Reverse ★ Speed control ★ Parameter memory Basic Parameters Voltage: 220V Power: 150W max Current: 2A Flow rate: 320-6000ml/min Pump tube: Silicone/BPT ...

Flow: 0.064 l/min - 0.452 l/min
Power: 50 W
Fluid temperature: -20 °C - 60 °C

... Semi-automatic cycle ★ Manual start/stop ★ Positive/Reverse ★ Speed control ★ Parameter memory Basic Parameters Voltage: 24V Current: 2A max Pump tube: Siiicone/BPT Multi-machine Interconnection: ...

Hand pump 25 l/stroke Order-number: 1452 Details Hand pump, accessories for UNI- and MULTI-Tank, pumps and accessories specially adapted for DWT diesel filling stations -robust ...

Steel drum-pump Order-number: 7892 Details Hand pumps for diesel and lubricants -robust construction -no energy source required -low-cost -2” connector -suction tube can be ...