Manual valves

... water valves, micro-valves, magnetic valves, mechanical valves, pneumatic valves. Check valves are available with various connections ...

DN: 2 cm - 3.5 cm

• Lower permeability and pressure loss compared to elastomer valves • High system safety and chemical resistance • Maximum residual drainage and reusability due to better gas tightness • Long and position-independent ...

IVEK’s Ceramic Liquid Valves offer a durable high-performance alternative to “plug valves” commonly used in instrumentation Traditional polymer valves have a limited life due to material ...

DN: 65 mm

The water stop valve is used to stop water of fire hose, controlled by ball valve, easy to operate with its strong practicality, light weight. It can block the water flow quicky when the fire hose bursts, ...

DN: 1, 2 in
Pressure: 2,500 psi
Temperature: 260 °C

... service time, thanks to top entry design and easy-to-service-seat Design offers choice of angle and globe valves Standardised 1" and 2" valves with variable trim options Choice of materials for body, ...

DN: 6 mm - 28 mm
Pressure: 414 bar
Temperature: -54 °C - 316 °C

Needle valve is a fine-tuning valve with a needle-shaped valve plug, which is mainly used to adjust the air flow. The fine-tuning valve requires the valve ...

... systems. They are normally operated remotely by air cylinders, electric or pneumatic actuators, although manual versions through the customary hand lever, handwheel and reduction gearboxes can be accommodated.

DN: 0.5 in - 8 in
Pressure: 0 bar - 20 bar
Temperature: -50 °C - 250 °C

Split body • Full Bore • Anti blow out stem • Autoadjustable packing • Self-relief seats • Low emission design Standards • Designs: ANSI B16.34 ISO17292 API6D • Face ...

DN: 40 mm - 300 mm
Pressure: 10, 16 bar
Temperature: 60 °C

Dueker gate valves – for water and gas.Reliable, safe and cost-effective. Dueker gate valves are used to great effect all over the world. There is a good reason for this – valves have ...

DN: 50 mm - 350 mm
Pressure: 1.6 MPa

DCL series high vacuum ball valves are widely used for silicon panel production equipments in Solar energy industry and semiconductor industry. Valves can be used for pipe pressure from 105Pa to 1.3*10-4Pa ...

PTFE high vacuum valve The properties of high vacuum and PTFE rubber O-rings at the top could arrive at the perfect effect of high vacuum and corrosion resistance. PTFE high vacuum rod with PTFE rubber O-ring YZ0501 ...

DN: 40, 50 mm

Butterfly valve No.1 ----Aluminum alloy interface butterfly valve Model Number:DN40 - Application:General - Material:HDPE Temperature of Media:Normal - Pressure:Medium Pressure - Power:Manual Media:Water ...

Depending on the version, the 5A venting valve is suitable for venting harmless gases, for drawing off aggressive media or for special drainage on manifolds. Important for the application: The valve is ...

The G84(5)F-10P/R manual three-way diaphragm valve has a maximum working pressure of 10 bar (in EPM or FPM) or 6 bar (in EPDM) and a maximum working temperature of 150℃. It features a tri-clamp and welding ...

DN: 5 mm - 38 mm
Pressure: 350, 400, 500 bar
Temperature: -20 °C - 100 °C

Body, Connecting Parts, Ball and Stem Stainless Steel, V4a (AISI 316) Each PH ball valve is subject to an inspection for resistance, sealing and special characteristics. Inspection control certificates 3.1 B or 3.1 ...

DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: -20 °C - 180 °C

Flapcon® BA102 Series Monoblock flanged ball valves are manufactured from cast iron, cast steel and stainless steel castings. Thanks to full-bore ball construction, they provide high capacity permeability. Due to the ...

DN: 6 in - 8 in
Pressure: 300, 750 psi
Temperature: -46 °C - 240 °C

Trunnion ball | Soft seated | Full bore | Bidirectional Fire safe design | Antistatic design Live loaded stem packing Double encapsulated body sealing ISO 5211 top works for automation Anti blowout stem Self relieving seats Optional ...

DN: 25 mm - 600 mm
Pressure: 0 bar - 16 bar
Temperature: -30 °C - 200 °C

... seats of double eccentric high performance valves today,butterfly valves are used from basic water applications to industrial applications and highly corrosive severe service applications    Butterfly ...

DN: 6.35 mm - 25.4 mm
Pressure: 300, 350 bar
Flow rate: 200, 120, 60, 90 l/min

4 ways inverter valve, cast iron painted body. Zinc plated stem. Available in 1/4 – 3/8 – 1/2 – 3/4 – 1G both open and closed center.

DN: 0.25 in - 8 in
Pressure: 150 psi - 4,500 psi
Temperature: -254 °C - 1,038 °C

The HI-100® Control Valve features an in-line Straight-thru, venturi flow design. The control element, a spherical ball, is contained by a cage that positions the ball relative to the downstream seat by means of linear ...

DN: 0.25, 0.125 in
Pressure: 1,000,000 Pa
Temperature: 0 °C - 120 °C

... offers simple-type, precision-type and various other needle valves, and also manufactures flow controllers having a combination of a needle valve and diaphragm as well as proportional solenoid valves ...

DN: 6 mm - 16 mm
Pressure: 45 bar
Temperature: -40 °C - 130 °C

Check valves and stop valves are designed for installation on commercial refrigeration systems and civil and industrial air conditioning systems employing the following refrigerants: R22, R134a, R404A, ...

DN: 0.75, 1, 0.5 in

Brass ball valve Lever of aluminium Brass full-bore ball valve, 1⁄4” drain valve and extra 1⁄4” connection for pressure gauge. Aluminium lever. Brass ball valve, ...

DN: 20 mm - 110 mm
Pressure: 10, 16 bar

... Ball Valve For Water Supply Application area 1. water supply 2. irrigation, swimming pool, agiculture 3. wastewater treatment 4. chemical industry Description： - Name of Items - PVC Socket True Union Ball ...