Pressure: 0 psi - 5,500 psi
The Series MV High Pressure Gas Control Valve is optimized for the demanding requirements of Gas Cylinder Fill Plants, Manifold, and Piping System applications. The High Pressure Oxygen Service Valve ...
Generant
Pressure: 29.4, 31.6, 35.7, 42.2, 49.6 bar
Temperature: 38, 100, 200, 300, 400 °C
... all stop valves and with test and drainage function. The TrapStation TS 36 encompasses the universal connector, two stop valves - which are accessibly positioned and clearly colour-coded to ensure easy ...
GESTRA AG
Pressure: 10 bar
Temperature: -5 °C - 70 °C
Should a sudden pressure failure happen. if the stop valves are assembled in pairs on the cylinder. the stop valves make sure, that the cylinder piston rapidily stops. By operating the override device, ...
The valves come in various types: The 5207065 valve this type is an adjustable valve with a remote-controlled air and abrasive cut-off system. The S898 valve on the other ...
Pressure: 5,000, 3,000 psi
Temperature: 0 °F - 225 °F
Use to slowly or quickly bleed pressure from a line after a calibration is complete • Easily connect between the end of a Quick-test hose and the process connection • Keep fluid or contaminates out of the hand pump, calibrator or ...
Ralston
DN: 100 mm - 400 mm
Temperature: -25 °C - 150 °C
Butterfly valves suitable for intercepting powdered products - Size DN100 - 150 - 200 - 250 - 300 - 350 - 400 - 2 half-bodies in cast aluminum with double flange: identical upper and lower flange - Possibility of ...
DN: 150 mm - 800 mm
Slide gate valves suitable for intercepting products in powder, granules, fibers and heavier materials - Size 150 - 200 - 250 - 300 - 350 - 400 - 500 - 600 - 700 - 800 mm - One-piece valve body in ...
DN: 250 mm - 300 mm
Temperature: -15 °C - 100 °C
Butterfly Valves for silos suitable for intercepting powder products - Valve body in carbon steel - Size DN250 - DN300 - With square or round fixing flange - Monobloc gasket in NBR for continuous ...
DN: 150, 200, 250 mm
Pressure: 67 bar
The emergency gate valves are widely used as safety systems during maintenance work. The valves fitted under the tanks offers easy dismantling of the part below them without the need to empty the tank. ...
Knife gate valves for isolating the flow of free-flowing dry powders and granules. This single-cylinder version features a self-cleaning blade that prevents accumulation of the product during opening and closing. The ...
DN: 1 in
Male-female straight ball valve complete with soft-seal fitting, butterfly operation (red)
Unidelta S.p.A.
DN: 15 mm - 50 mm
Pressure: 16 bar - 40 bar
Temperature: -10 °C - 180 °C
Type: Angle seat valves Functioning: 2/2 way pneumatically operated, Normally closed Body material: Stainless Steel AISI 316 series Port connection: G 1/2, G 3/4, G 1, G 1 1/2, 1 1/4, 1 1/2, 2 Flow Kv (l/min): 80, ...
DN: 3.96 in
Temperature: 35, 40 °F
... locomotive freeze protection valve in the world. This self-operating valve is designed to monitor the water temperature of the engine’s water-cooling system and automatically snap open to drain it if ...
Thermomegatech
Pressure: 0 bar - 16 bar
Temperature: 50 °C
Flow rate: 1,570 l/min
The block device is particularly useful during maintenance operations. It prevents the system from being accidentally or wrongly pressurized. It can be wall mounted using the relative holes. Discharge connection: G 1/8”. Maximum inlet ...
Aircomp by Stampotecnica
THROTTLE VALVE WITH FREE FLOW IN ONE DIRECTION DESCRIPTION The QTM7 valve is a one-way flow control valve with built-in non-return valve for reverse free flow, in ...
Pressure: 6,000 psi
... 'PSB' rated upto 6,000psi (414bar) The 3-way L-Port diverter valves are an economical and safe method of diverting high pressure lines, saving the use of several high pressure 2-way valves. Ensuring ...
Alco
ECONEX Manual Reset Shut-Off valves Normally Closed of the series MRVA are equipped with a new-concept powerful solenoid capable of functioning at high operating pressures and flow capacities than most ...
ECONEX S.R.L.
DN: 177.8, 76.2 mm
Pressure: 0 bar - 30 bar
Temperature: -20 °C - 80 °C
MANUAL EMERGENCY VALVE VEM CARTRIDGE VALVE FOR EMERGENCY MANUAL ACTING The manual emergency valve VEM is a 2 ways / 2 positions ...
Oleoweb Srl
DN: 15, 8, 10 mm
Pressure: 8, 10, 6 bar
Temperature: -20 °C - 140 °C
The ball and shut-off valves are available in 2-way and 3-way configurations and in a wide variety of threaded connections – including push-in. The different flow capacities ensure a reliable solution to the specific ...
DN: 0.25, 0.125, 0.43, 0.56 in
Pressure: 10,000, 6,000 psi
Compact size valve built for maximum durability and robust performance in the toughest applications 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability Hard seat valves ...
NOSHOK
DN: 10 mm - 600 mm
... CERAMIC INDUSTRY, as a shut-off valve for solids, sludge, etc. ENVIRONMENTAL TECHNOLOGY, for sealing waste water, dust, sludge, etc. WATER TREATMENT/SEWAGE TREATMENT PLANTS, as a shut-off valve ...
AKO ARMATUREN
DN: 15 mm - 1,200 mm
Pressure: 3 bar - 40 bar
... closing process causes any incrustations inside the sleeve to break away. This means that the manual and control Pinch Valve is a practically blockage-free valve solution. Furthermore, ...
AKO ARMATUREN
DN: 15 mm - 250 mm
Pressure: 5, 3, 4, 2 bar
... of manual and conrol Pinch Valves OV series A selection of different elastomer grades for the sleeve (e.g. rubber, neoprene, nitrile and EPDM) ensures that the valves have a very wide ...
AKO ARMATUREN
DN: 5.5, 3 mm
Pressure: 20 bar
Temperature: -20 °C - 80 °C
2/2-way socket ball valve Micro brass design chromed with connection connector and male R-thread Producer Material of ball: Brass hard-chromium plated Material of ball seal: PTFE Material of spindle seal: NBR ...
Mader
DN: 15 mm - 76 mm
Temperature: -10 °C - 170 °C
2/2-way ball valve brass design nickel-plated in medium heavy design with female G-/R-thread Producer Material of casing: Brass nickel-plated Material of ball: Brass hard-chromium plated Material of ball seal: PTFE Material ...
Mader
DN: 10, 25, 15, 20 mm
Temperature: -20 °C - 150 °C
2/2-way ball valve brass design nickel-plated with butterfly handle with male thread Producer Material of ball: Brass hard-chromium plated Material of ball seal: PTFE Material of spindle seal: PTFE Material ...
Mader
... also offers a range of tools for tank and kegs like high quality spunding valves with 2.5 bar gauge which allow to maintain a set pressure in the vessel from 0 to 2.5 bar, or valves groups for kegs filling ...
DN: 0.25, 0.375 in
Pressure: 275 bar
Install at the pump high pressure area, discharges the air in the pump and water intaking pipe line,enhance the sucking capability, and allow to suck water from a barrel and even pond. Brass body,1/4" hose barb discharge port,360°swivel, ...
Pressure: 4,000 psi
... triplex plunger pumps into a sewer cleaning pump by turning the handle on the valve. Install on the pump central intaking valve, when fully engaged the pin stops the valve from operating. ...
... with various end connections for easy system integration Specifications : Material: Stainless Steel Type: Gate Valve Operation: Manual (handwheel or lever) Pressure Rating: Depends on exact model specifications Dimensions ...
DIXON GROUP EUROPE
... flexibility Specifications : Material: Brass (Body), Stainless Steel (Disc) Type: Wafer-Style Butterfly Valve Pressure Rating: 150lb Operation: Manual or Actuated Options Available Dimensions : Model: ...
DIXON GROUP EUROPE
... construction for long service life. • - Reliable leak-tight performance with tight shutoff. • - Easy operation with a quarter-turn valve handle. • - High-quality ball and seat design for improved sealing and flow control. • ...
DIXON GROUP EUROPE
DN: 6 mm - 25 mm
Flow rate: 25 l/min - 180 l/min
These valves are used to divert the inlet flow towards 2 alternate ports (L scheme). Applications: Connect P to the pressure flow, A and B to the circuit ports where flow has to be diverted. With lever at 90° flow ...
DN: 80 mm - 1,200 mm
Pressure: 50 bar
Temperature: -196 °C - 260 °C
Triple-offset butterfly valve, metal-seated (fire-safe), without gland packing, maintenance-free, with lever or manual gearbox, pneumatic, electric or hydraulic actuator. Body made of steel or stainless ...
KSB S.A.S. - France
DN: 15 mm
Pressure: 68 bar
Temperature: -20 °C - 200 °C
Introducing the RS PRO general purpose manual ball valve designed for industrial applications. Manual ball valves are used to operate shut off valves ...
the best suppliers
Please specify:
Help us improve:
remaining