Organic mater levels by measuring UV absorption at the wavelength 254 nm Multiparameters : SAC254, BOD, COD, TOC and turbidity Sensor without reagent or consumable 2 optical path available : - 2mm : wastewater - 50 mm : natural waters Very ...
The new digital TRIPOD of AQUALABO (Brand Ponsel) allows to measure until 8 physico-chemical parameters in the same time dedicated to the quality of waters among the following ones: - pH, ORP, Temperature,- DO (by optical way),- Turbidity ...
The OPTOD (Optical Dissolved Oxygen technology) is based on luminescent optical technology. The OPTOD sensor is approved by the ASTM International Method D888-05 and compliant to ISO 17289. Without calibration requirements and thanks ...
... current traveling through the probe window area. For ease and convenience of performing conducted measurements, all of our current probes utilize the split type clamp-on design. Small ...
A.H. Systems
... -611 monitoring current probe is a great measurement tool for MIL-STD, CISPR and many automotive specifications. The 1V/A flat response of this current probe makes it ideal for a 1:1 ...
A.H. Systems
... means of clamp-on current probes. The BCP-614 Current Probe is designed to permit field intensity meters, spectrum analyzers, and other 50 ohm impedance instruments to measure quantitative magnitudes ...
A.H. Systems
... Description Ultrasonic probe for non destructive test (NDT) on concrete foundation poles. SUF52FRF model is an ultrasonic high efficiency active transducer which can be used both as emitting (TX) and as receiver (RX) ...
M.A.E. S.r.l.
THERMAL CONDUCTIVITY PROBE FOR SOIL , LENGHT 120 CM. Description CTS120 is a probe, for measures in the soil (lenght = 120 cm), that offers the possibility to perform a practical and fast measurement ...
M.A.E. S.r.l.
THERMAL CONDUCTIVITY PROBE ON SAMPLES, LENGHT 45 CM Description CTS45 is a probe for measuring the conductivity in laboratory on samples , length: 45 cm, that offers the possibility to perform a practical ...
M.A.E. S.r.l.
Energy: IEC/EN 62110 Railway: EN 50500 Welding: EN 50505 Induction heating (LF): EN 50519 Electric arc or induction smelting Household appliances: IEC/EN 62233, EN 50366 RFID/EAS: EN 50364, EN 50357, IEC/EN 62369-1 Medical: IEC 60601 Research/Labs Electronic/electrical ...
WAVECONTROL
... heated filter probe has an integrated filter chamber that accepts a glass fibre filter cartridge or a stainless steel sintered filter. Two stages of filtration can be achieved using a 20 micron (or 10 micron) SS sintered ...
The CleanAir single point heated EMC gas sampling probe is available with a 1/4″ or 3/8″ stainless steel heating jacket, a 1″ OD stainless steel sheath and a type K thermocouple. The probe is available ...
Used to locate buried plastic Water Pipes, Gas Pipes and any other non-magnetic utility, Sondes are self-contained transmitters that are used with our cable and pipe locators. Sondes are typically attached to a Flexrod, pushed along ...
Radiodetection
Compact in-situ probe Using heated ZrO2 sensor for wet O2 analysis up to 600°C flue gas temperature With optional special heated solid electrolyte sensor for combustibles measurement Basic-Equipment ...
An advanced Langmuir probe for plasma diagnostics Routine monitoring of the I-V plasma characteristic by the Hiden ESPion probe gives direct information relating to plasma stability and reproducibility. ...
Twin Element Ultrasonic Probe designed for high-temperature, in-service thickness measurements and corrosion surveys across oil and gas, refining, energy and process sectors. Great wear resistance allows ...
... eventually wear down. The gauge will automatically “Zero” the probe to compensate for wear (until there is excessive wear when the probe should be replaced). The gauge will indicate when the probe ...
... crystal probes are for use with the gauge in Multiple-Echo mode to read through and ignore coatings. These have one piezo-ceramic crystal. This crystal both sends and receives the ultrasound energy. The S2C single crystal ...
... or metric sizes with various insertion lengths. Signal Group offer a large range of sample probes for various applications. These can be Heated or Insulated. Probe material include Stainless Steel, Monel, ...
• Three current ranges: 30A, 300A and 3000A. • Two output sensitivities (300mV and 1V), versatile for measuring instruments. • Input protection up to 600V. • Suitable for any electncal system. • Wide bandwidth, low phase shift. • ...
• Three current ranges: 60A, 600A and 6000A. • Two output sensitivities (600mV and 1V), versatile for measu ring instruments. • Input protection up to 600V. • Suitable for any electrical system. • Wide bandwidth, Iow phase shift. • ...
DIFFERENTIAL PROBE P9000 Easily Connect to Hioki Memory HiCorders and HiLoggers for High Voltage Testing Overview • - Compact probe for CAT III 1000V environments • - Wave mode: Observe instantaneous ...
HIOKI EUROPE GmbH
... , and common mode rejection, IsoVu Gen 2 probes are setting new standards for isolated probe technology. An Isolated probe uses galvanic (optical) or RF isolation to divorce the reference ...
Microcor® ER Probes are an integral component of the new high-resolution Microcor® system. Special design of the probes provides advanced thermal performance, and reliable operation in all environments ...
Rohrback Cosasco Systems
ATR tunnel cells provide a high degree of analytical accuracy. They are ideal for the chemical analysis of liquids in the IR range.
Hellma GmbH & Co. KG
DS280 Water Salinity Sensor Digital Salinity Probe adopts a new generation of four-electrode technology, with a wide measurement range and automatic range switching. Automatic temperature compensation ...
... different, e.g. for measurements in poorly accessible places. • The measuring range should be increased up to 9.99 Sv/h with the probe 6150AD-15/E, or decreased to 0.5 µSv/h with the probe ...
AUTOMESS GmbH Automation und Messtechnik
... location to be checked temporarily. An integrated short probe cable and the removable carrying strap are included in the delivery of the teletector probe but not with the 6150AD. Teletector Probe ...
AUTOMESS GmbH Automation und Messtechnik
... scintillator probe are the large energy range and high sensitivity. The scintillator probe is therefore particularly suitable for fast and accurate measurements of small radiation levels, ...
AUTOMESS GmbH Automation und Messtechnik
Geothermal proximity probe, designed and engineered to optimise the operation and performance of solar-assisted (helium-assisted) water-to-water heat pumps. Even small spaces of land (gardens) are sufficient for installation. GeoBond ...
Positional current probe, PCB track Touch & Measure • Current measurement from insulated probing of conductor • Suitable for observation and measurement of current in PCB ...
The PI-07P probe works in the frequency range 100 MHz – 60 GHz, covering most of the test requirements of MIL STD-464, RTCA-DO-160, FAA HIRF Rule & Advisory Circular 20-158, Boeing, Airbus and automotive EMC GM and ...
EMC Test Design, LLC
Probes to Measure Illuminance or Irradiance There are different optical quantities and a range of different measurement geometries that require the use of dedicated probes. As a full ...
GL Optic
The ROYALPROBE™ HFX is the world’s first liquid NMR probe switchable between single tune and dual tune mode on the High Frequency coil without compromising the NMR performance. The ROYALPROBE™ HFX operating in single ...
Jeol
... temperature compensation with on-board sensors leads to best CO2 measurement accuracy independently of the altitude or environmental conditions. EE872 incorporates the E+E dual wavelength NDIR CO2 ...
E+E ELEKTRONIK
... in vivo spectral probe can deliver full spectral measurements in the NIR-II range. Ideal for measuring fluorescence emission from nanosensors or new dyes, its small form factor and ergonomic benchtop ...
... hard surfaces). Each probe is fully manufactured in-house according to highest possible standards, carefully calibrated in factory (at several reference points) in order to provide maximum trueness. Additionally, all ...
Please specify:
Help us improve:
remaining