Mechanical thermostats

Temperature: -25 °C - 75 °C

PID Digital Thermostat 48x48mm ET4420; 48 x 48mm sized. Selectable dual setpoint. Selectable thermocouple types. Automatic calculation of PID parameters. (SELFTUNE). Three different specifications can be assigned ...

Temperature: -40 °C - 200 °C
Switching power: current: 6 A
Switching power : voltage: 250 V

Types of contacts : opening - closing Composition of contacts : solid silver Voltage proof between terminations and ground : 4 000 V Contact resistance : 10 m Ohm Connection : terminal for 2.8 mm clips - can also be soldered

Temperature: 5 °C - 30 °C
Switching power: current: 10 A
Switching power : voltage: 230 V

General Characteristics Sensor - Bilame with thermal heater Color - Blanc RAL 9010 Protection rating - IP 30 Run voltage - 230 V - 50-60 Hz Contact intensity - 10 A Hysteresis - 0.5 K Dimensions and Weights : Deph x high x width ...

Switching power: current: 16 A
Switching power : voltage: 250 V
Process temperature: -45 °C - 80 °C

The mechanical thermostats KTO 111 and KTS 111 are two state regulators for use up to 5,000 meters in altitude, thanks to optimized air gap and increased creepage distance. By use of Push-In terminals ...

Temperature: 0 °C - 310 °C
Switching power: current: 5 A - 16 A
Process temperature: 210 °C

Bimetal thermostats are housed small-size bimetal thermostat, belong to contact temperature sensing electric devices. It achieves the purpose of switching on or off in the principle of simultaneous jump ...

Temperature: 32 °F - 270 °F

Disc Thermostats Selco’s comprehensive line of highly reliable switches utilize a temperature sensitive bi-metal disc, electrically isolated from the switch. Contacts will close or open on temperature rise when the ...

Temperature: 0 °C - 40 °C

The Mechanical Thermostat Series T15 series and T10~3 is manufactured by Vostermanss Ventilation. The T15-WD switches has single phase and it has on/off at a set temperature. It is a combination of two ...

Temperature: 200 °C - 260 °C

These Snap Action Thermostats operate as a high limit, single operation (non-resettable) type control. Ultra fast thermal response times due to the unique positon of the bimetal element. The ceramic case allows them ...

Temperature: -20 °C - 55 °C
Switching power: current: 15 A
Switching power : voltage: 24 V - 250 V

... , please note that the fluid reservoir located in the thermostat is also temperature-sensitive and thus an integral part of the active measuring system. FT69 Single-stage protection thermostats for ...

Process temperature: 11 °C - 17 °C

Model SP155 is a thermostat for the heat traced cable outdoor Models 8317CTFP AXION and 8317CTFP.220V. It has hermetically sealed contacts. Opens (rising) at 62°F (17°C) and closes (falling) at 52°F (11°C).

Temperature: 3 °C - 30 °C
Switching power: current: 6 A
Switching power : voltage: 230 V

The IRM series Ex controllers are mechanical 2-point temperature monitors. The black glass-fibre reinforced polyester housing is mechanically robust and serves as a connection for self-limiting heating conductors. The ...

Switching power: current: 10 A
Switching power : voltage: 110 V - 230 V
Process temperature: 0 °C - 60 °C

Supply Includes : 1 x Fan Thermostat IP Rate : IP 20 Sensor Component: Bimetallic Thermostat • Conforms to the CE Norm • Mounting on 35 mm DIN rails • 0.75-1.50mm2 connection

Temperature: -20 °C - 99 °C
Switching power: current: 5 A
Switching power : voltage: 220 V

... signal. User can adjust temperature value very easily to use dial and a LED indicator to show the relay. -. Electromechanical thermostat, max with 2 control port for fan & heater -. Dial pad setting ...

Temperature: 50 °C - 175 °C
Switching power: current: 10, 16 A

KSD301 snap action thermostat is a reliable bimetal mechanical thermostat that provides a rapid response time when snapping open/close switch contacts. With fixation of working temperature, ...

Temperature: 4 K - 325 K

... nitrogen (helium) thermostat - continuous flow is mainly suitable for cooling liquids, powders, samples with poor thermal conductivity and irregular shapes. The Dexinmag continuous flow liquid nitrogen (helium) thermostat ...

... capillary thermostats is used in non-demanding applications where high accuracy and response time of the regulation are not very important (e.g. heating water in a storage tank). We can install adjustable thermostats ...

Temperature: 0 °C - 60 °C

The mechanical thermostat is used for controlling heating and cooling equipment filter fans or signal lamps. The thermostat registers the surrounding air and can switch both inductive ...

Temperature: -35 °C - 40 °C

... heaters, fan heaters and air curtains. We offer everything from processor controlled wireless thermostats with advanced functions to the simplest bimetal thermostats.

Temperature: -32 °C - 50 °C
Switching power: current: 16 A
Switching power : voltage: 230 V

The capillary thermostat EL-CT is approved for use in hazardous areas Zones 1 and 2 for gas and Zones 21 and 22 for dust as a surface thermostat on pipes and vessels. There are different temperature ranges ...

Temperature: 0 °C - 150 °C

Automatic reset, open on rise (normally closed) or close on rise (normally open) Single pole, single throw (SPST) Cost effective, compact, high reliability, long life, ROHS compliant The most versatile applications Applications Kitchen ...

Temperature: 20 °C - 80 °C
Switching power: current: 10, 15 A
Switching power : voltage: 250, 120 V

... monitoring filter fans,heat exchangers or a single temperature exceeds a set value, the closed circuit out signal. JWT6011F Thermostat(normally open):commonly used in the monitoring filter fans,heat exchangers,or when ...