Metal check valves

DN: 15 mm - 100 mm
Pressure: 0 bar - 16 bar
Temperature: 0 °C - 90 °C

BRASS SPRING CHECK VALVE - MBV BRAND Specification Used for water Thread standard: BS 21/ ISO 228-1-2000 Max. working pressure: 16 bar Max. working temperature: 90oC Origin: Vietnam Manufacturer: Minh ...

DN: 50 mm - 500 mm

Cl. 150-300 FLANGED CHECK VALVE TRIM 8 Description •Body in Carbon steel ASTM A216 WCB or Stainless steel CF8M •Class 150-300 •Standard: API 6D •Face to face dimension: ASME ...

DN: 50 mm - 300 mm
Pressure: 10, 16 bar
Temperature: 0 °C - 80 °C

... sure to install a minimum of 5 x nominal diameter of straight pipeline in front of and behind the dual plate check valve. Do not install the valves directly onto a pump flange.

DN: 6 mm - 40 mm
Pressure: 350 bar
Temperature: -20 °C - 100 °C

SAE J 514 / ISO / DIS11926-1 Female thread Panel mounting kit

DN: 15 mm - 150 mm
Pressure: 0 bar - 10 bar
Temperature: -4 °C - 200 °C

Fully lined Ball Check Valves for safe non-return flow control of corrosive process media. Typical installations are in front of pumps, as overflow protection for liquids and in venting applications. Main ...

DN: 2 in - 8 in
Pressure: 8.6 bar - 155 bar
Temperature: -29 °C - 815 °C

Swing check valve, Bolted cover Renewable disc and seat (in S.S. construction, integral seat non renewable) STANDARDS PED Quality Standard MSS SP 55 All wetted component materials meet NACE MR0175 ...

DN: 10 mm - 100 mm
Pressure: 10, 12, 16, 25, 40 bar
Temperature: -20 °C - 100 °C

Full bore check valve, F/F threaded. Temperature range: -20°C +100°C

DN: 40 mm - 600 mm
Pressure: 16, 10 bar
Temperature: 100 °C

environment-friendly no maintenance Aplications hot and cold water plants oil plants

DN: 0.125 in - 4 in
Pressure: 0 bar - 255 bar
Temperature: -29 °C - 400 °C

Check valves, also known as one-way valves, non-return valves, or single-flow valves allow fluid to flow in the direction of the arrow but do not allow ...

DN: 10 mm - 100 mm
Pressure: 12, 16, 25, 40, 10 bar
Temperature: -10 °C - 150 °C

Full bore check valve, F/F threaded, Viton® seat suitable for application with not halogenated hydrocarbons and fuels (gasolines, kerosene...).

DN: 0.25 in - 3 in
Pressure: 12 bar - 40 bar
Temperature: -10 °C - 180 °C

... pressure switches, blocking valves, needle valves and gate valves. Coaxial valves and check valves also belong in the assortments as ...

DN: 2 in - 36 in

... Bellow Seals Globe Valves – Y-Pattern, Standard & Bellow Seals Swing Check – Wafer Check Valves, Dual Disc, Tilting Disc Piston Check – Ball Check ...

DN: 50 mm - 600 mm
Temperature: 0 °C - 80 °C

Silent check valve is an industrial valve designed to prevent backflow of medium. It is applicable to stop the back flow of water, oil products, sea water, sewage and other pipeline systems. Features 1.Due ...

DN: 18 in - 56 in
Temperature: 780 °C

The fluidised catalytic cracking (FCC) air blower line check valves are used to prevent the backflow of catalyst from the regenerator. IMI Remosa’s check valves guarantee ...

DN: 2, 3 in
Pressure: 3,000 psi - 15,000 psi

... standard. • The valve is casted by hard alloy steel and adopts union. Check Valves are installée! in high pressure lines to stop reverse flow by the automatic close of flapper or ...

DN: 50 mm - 400 mm
Pressure: 16, 25, 40 bar
Temperature: -20 °C - 200 °C

Flapcon CV32 Check valves are used to prevent the return of liquid due to a power failure or any change in the characteristics of the liquids. In flow back through the sealing system to seal in cases ...

DN: 0.25 in - 2 in
Pressure: 16, 40 bar
Temperature: -20 °C - 180 °C

Description Check Valve Body Brass, Stainless Steel

DN: 25 mm - 600 mm
Pressure: 0 bar - 16 bar
Temperature: -30 °C - 180 °C

... handling fresh,sea, waste water,steam,acids and alkaline liquid. • A minimum back pressure of 0,3 bar is required to keep the valve tight.

ERK Tilting Check Valve The ERK tilting disc check valve is the result of more than 50 years of experience in building and use of tilting-disc check ...

DN: 50 mm - 600 mm
Pressure: 16 bar

Eurocheck valve ECV Construction - Non-return valve Body type - Wafer type End connection - ISO, PN 6 / PN 10 / PN 16 ASME, CL 150 Design pressure - 16 bar / 232 psi Nominal diameter - ...

DN: 0.375 in - 2 in
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 160 °C

The Check Valves, PN16, DIN EN 3845-2 have a bronze body and attached cover in brass. It is perfect for non-lethal and non-combustible liquids, gases and fumes. The maximum working pressure is 16 bars ...

DN: 15 mm - 150 mm
Pressure: 10, 16, 25, 40 bar
Temperature: -15 °C - 100 °C

The valves in series W6 are disc wafer spring check valves, which are manufactured in accordance with the relevant product standards, and in conformity with the quality requirements of ...

DN: 0.375 in - 4 in
Pressure: 16 bar
Temperature: 0 °C - 95 °C

• Body in bronze CC491K • Thread : Female/Female ISO 228-1 • Seals in NBR • Working temperature • The valve is ideal for sanitary and pneumatic plants for one direction flow. It is ideal for pumps and autoclaves. • ...

Pressure: 350 bar
Temperature: -30 °C - 120 °C
Flow rate: 610 l/min

... . · Reverse flow through the valve from port 2 to port 1 is not possible under any condition. Operation This valve is a spring biased closed, pilot-to-close check cartridge that ...

DN: 32 mm - 600 mm
Pressure: 10, 16 bar
Temperature: 80, 120, 170, 200 °C

Wafer check valve. Light weight and small face-to-face. Easy to install and maintain.