Discharge bends [KRC] are designed to be coupled to the pump's discharge port or inside plants, in both cases allowing a tight-radius 90° change in direction. They may be flange-flange or flange-thread type, with full free passage. Another ...
Zenit
COUPLERS The external coupler [DAC-E] consists of two parts: a fixed part for connection to the plant and a movable part connected to the pump by means of an optional threaded connecting pipe. The two parts can be connected and disconnected ...
Zenit
COUPLERS The bottom coupler with vertical discharge DAC-V is compact and rugged, suitable for installation in small pits. It allows the pump to be connected to the system and easily disconnected for servicing or storage even without ...
Zenit
Diameter: 50 mm - 300 mm
... extending, connecting and joining light to medium weight hoses Construction / Material Hose reduction design - made of metal Material of hose reduction - Sheet steel, galvanised Properties Chemical Properties ...
Diameter: 25 mm - 150 mm
... - made of highly abrasion-resistant material Execution of the nozzle - hose threaded connector design, cast on, made of metal, external thread according to DIN ISO 228 Properties Chemical Properties - stainless, ...
Diameter: 40 mm - 150 mm
Operating pressure: 16, 10 bar
HALF COUPLING WITH LOCKING RING - HOSE SHANK WITH COLLAR - NBR GASKET - ALUMINIUM - STAINLESS STEEL 316
BENE INOX
Diameter: 10 mm - 32 mm
Operating pressure: 10 bar
HALF EXPRESS COUPLING, MALE BSPP THREADED - STAINLESS STEEL 316 - BRASS Inox 316 - Laiton
BENE INOX
Diameter: 8 mm - 50 mm
UNIONS HOSE SHANK CONICAL SEAT - FEMALE HOSE SHANK - STAINLESS STEEL 316L
BENE INOX
Diameter: 3 mm - 14 mm
Operating pressure: 1 bar - 10 bar
ORIENTING FLOW REGULATOR FOR VALVE “UNIVERSAL SHORT” The fuction fittings of Aignep have been designed to suit a specific use. With a large variety of materials (brass, stainless steel, technopolymer, aluminium) they ...
AIGNEP
Adaptation of up to 12° in all directions. Independent return to zero position.
Diameter: 16 mm - 63 mm
Operating pressure: 16 bar
90° elbow with reinforced solvent weld socket d and BSP threaded female end R with STAINLESS steel reinforcing ring. Series of fittings designed for conveying fluids under pressure with threaded and ...
Diameter: 20 mm - 63 mm
... Series of transition fittings with element brass threaded molded in the polypropylene body, suitable to join hydraulic equipment and threaded metal pipes with polyethylene pipes from d 20 up to d 63 mm. The ...
Diameter: 10 mm - 20 mm
Barbed fittings used to connect the vacuum source to the vacuum tube to guarantee a rigid connection. Material: brass Models : . RVM: Straight Fitting (Male) . RVF: Straight Fitting ...
Diameter: 0.25 in - 1 in
Operating pressure: 0 bar - 1,550 bar
MAXIMATOR fittings and gland assemblies of the 1,550 bar series are designed for simple and safe connection of HP pipes up to a max. pressure of 1,550 bar. All gland assemblies are fit for multiple use. Fittings ...
Galvanised steel clamps for steel down conductors.
Brass clamps for copper lightning protection down conductors.
Diameter: 0.5, 0.75 in
Wall bearing elbows WALL BEARING ELBOW WITH FEMALE THREADED BRASS Wall bearing elbow with male/female threaded brass
OMI Officine Meccaniche Industriali
Diameter: 19 mm
Operating pressure: 5,075 psi
Manuli Hydraulics has long been established as one of the global leaders in the design and manufacture of premium quality quick couplings. The Q.Safe range of quick couplings is widely considered to represent the gold standard in both ...
MANULI HYDRAULICS
Diameter: 3 mm - 50 mm
Operating pressure: 6,000,000 Pa - 22,000,000 Pa
Connection by pulling back the sleeve Disconnection by pulling back the female sleeve Shut off by poppet valve Connection under pressure not allowed Disconnection under pressure not allowed Interchangeability according to ISO 7241-1 Part B
FASTER S.p.A.
Diameter: 11 mm
The system variacor®, patented internationally, allows, with these two joint-turning, to make flexible and directional all the rigid and semi-rigid pipes, whatever is their natures and applications. Cost saving : no more premature ...
MID - VARIACOR
Diameter: 11 mm
Operating pressure: 40 bar
... caused by the rigidity of the flexible, easy washing in places with difficult access. Durable, thanks to mechanical stainless steel components and Aluminium body for food application. Reduce the efforts, increases ...
MID - VARIACOR
Diameter: 25 mm - 65 mm
Operating pressure: 25, 40 bar
Passage of water, hydrocarbons, food liquids, in pressure or in vacum, very numerous uses for joins DynaVariacor® which return flexible and dirigible any types of flexible or rigid pipes. Less effort due to hose rigidity, make easier ...
MID - VARIACOR
KROMA MEC SRL
KROMA MEC SRL
... connections between female mouthpieces. Threads: - BSP TAPER BS 21 - NPT (ANSI B1.20.1) Materials: - Mild steel zinc plated - Stainless steel
KROMA MEC SRL
Diameter: 3.2 mm - 17.5 mm
Operating pressure: 0 bar - 1,400 bar
MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 ...
Diameter: 1.6 mm - 11.5 mm
Operating pressure: 0 bar - 7,000 bar
MCS® High-Pressure fittings were conceived due to the need of offering an extremely reliable product to the high pressure industry. They are made with cold worked AISI 316L and are available in NPT versions up to 1035 ...
Ideal for pressure gauges with outlet on the back This horizontal output is very useful for connecting pressure gauges with an output on the back.
Rastelli Raccordi manufactures 37° fittings for flared tubes in carbon steel and stainless steel in compliance with SAE J 514/ISO 8434-2. The particular features of the SAE J 514 – 37° fittings ...
Rastelli Raccordi
Operating pressure: 0 bar - 8 bar
It’s a Safety accessory in according with Directives ATEX 2014/34/EU and PED 2014/68/UE. The dry Break coupling is used to prevent any possible leaking during the process of transferring hazardous fluids in different fields of application ...
Ridart srl
Diameter: 2, 3 in
Operating pressure: 0 bar - 8 bar
It's a Safety accessory in according with Directives ATEX 2014/34/EU and PED 2014/68/UE. The dry quick coupling is used to prevent any possible leaking during the process of transferring hazardous fluids in différent fields of application ...
Ridart srl
Diameter: 3, 2 in
Operating pressure: 0 bar - 8 bar
It's a Safety accessory in according with Directives ATEX 2014/34/EU and PED 2014/68/UE. The dry quick coupling is used to prevent any possible leaking during the process of transferring hazardous fluids in différent fields of application ...
Ridart srl
Diameter: 3, 10, 2, 1.8, 6 mm
Operating pressure: -0.1 MPa - 1 MPa
Mini-type fitting is 40% smaller than the standard type fitting. Even the ultra-small size, tube can be easily connected or disconnected. The elliptical, ultra-small release ring is employed. Easy ...
NIHON PISCO CO., Ltd.
Diameter: 3 mm - 6 mm
Operating pressure: -0.1 MPa - 0.5 MPa
Barb joint best suitable for space-saving piping. They are optimal for piping vacuum equipment. (Use with vacuum tube.) As for compression type, tube can be tightening by hands. Clean-room Package, best suitable for compact piping ...
NIHON PISCO CO., Ltd.
Diameter: 3 mm - 12 mm
Operating pressure: -0.1 MPa - 0.6 MPa
Tube Fitting EG type adopts antistatic resin material. Best suitable for the environment dislikes static electricity. For price options, please contact our distributor near your office. https://www.pisco.co.jp/en/company/network/
NIHON PISCO CO., Ltd.
Operating pressure: 25, 80, 200, 250, 390 bar
... are available in 1/2”, 3/4” and 1” and many thread types, so they can connect any combination of threads and pipes . The fittings are suitable for low and high pressure work. Compatible with plastic garden connector.
NITO Fitting - NITO stainless steel fluid quick couplings are suitable for food contact and are used in the pharmaceutical, food, cosmetic and chemical industries. Stainless steel fittings ...
NITO high pressure quick coupling Optimal solution for high pressure cleaners and fixed installations. NITO high pressure fittings are manufactured from materials with an exceptionally strong and secure locking mechanism ...
Diameter: 16, 12, 13.7 mm
Operating pressure: -0.99 bar - 20 bar
... connection style fitting is a perfect solution for all applications requiring the Cleaning in Place (C.I.P) sanitation procedure. The assembly and disassembly of a Clamp fitting is very easy and does ...
C.Matic S.p.A.
Diameter: 6, 8, 10 mm
Operating pressure: -0.99 bar - 20 bar
... connection style fitting is a perfect solution for all applications requiring the Cleaning in Place (C.I.P) sanitation procedure. The assembly and disassembly of a Clamp fitting is very easy and does ...
C.Matic S.p.A.
Diameter: 6, 8, 10 mm
Operating pressure: -0.99 bar - 25 bar
C.Matic S.p.A.
Compression fittings are used for connecting metal tubes useful for high and low temperature applications ad compatibility with aggressive fluids these can be seen in systems varying from gas lines in ...
PUSHNA INTERNATIONAL
... also for customers that take standard fitting and weld or thread non standard sizes on one end or make a custom fitting while embedding an RTD or thermocouple at the same time. Whether you are welding ...
PUSHNA INTERNATIONAL
... also for customers that take standard fitting and weld or thread non standard sizes on one end or make a custom fitting while embedding an RTD or thermocouple at the same time. Whether you are welding ...
PUSHNA INTERNATIONAL
Diameter: 3 mm
Diameter: 6 mm - 25.4 mm
Diameter: 1.5 mm - 7.95 mm
The Temperature Technology Ltd offers these compression fittings intended to be utilized for temperature sensor systems. This component is made in brass to deliver minimal running cost as an alternative to stainless-steel. ...
Operating pressure: 350, 700 bar
Connect 2 Quick-test XT 10,000 psi hoses together quickly and easily • Quick-test XT connection makes connecting two high pressure hoses together quick and easy • Note that these are not compatible with QT or QS hoses. Please ...
Ralston
Diameter: 3 mm - 14 mm
Operating pressure: 16 bar
... Hexagon socket for easy assembly Operating temperature : -20°C bis +70°C -20°C bis +80°C For fittings with PVC seal For fittings with NBR O-rings Vacuum : max 98% Materials : NBR seals Black ...
ITV
Diameter: 4 mm - 14 mm
Operating pressure: 16 bar
... Hexagon socket for easy assembly Operating temperature -20°C bis +70°C -20°C bis +80°C For fittings with PVC seal For fittings with NBR O-rings Vacuum max 98% Materials NBR seals Black ...
ITV
Diameter: 4 mm - 14 mm
Operating pressure: 16 bar
... Hexagon socket for easy assembly Operating temperature -20°C bis +70°C -20°C bis +80°C For fittings with PVC seal For fittings with NBR O-rings Vacuum max 98% Materials NBR seals Black ...
ITV
Please specify:
Help us improve:
remaining