DN: 0.25 in
Voltage: 0 V - 30 V
Temperature: 0 °F - 174 °F
... proportional solenoid valve PSV proportional solenoid valve PSV proportional solenoid valve, PSV Valve - Product ...
DN: 0.125 in
Voltage: 12 V - 220 V
Temperature: -10 °C - 60 °C
... seals 6 bar flow rate with Δp 1 bar30 Nl/min Minimum power3W - 5VA Manual controlBISTABLE Torque of tightening the nut solenoid0.6 Nm
AIGNEP
DN: 3.18 mm - 12.7 mm
Voltage: 110, 24, 12, 230 V
Temperature: -30 °C - 180 °C
... coil changes coil lockable in 4X90 position or freely movable in between as require. > Coil Housing: - Epoxy square coil, Metallic round enclosure, IP-67 Flameproof enclosure, IP-68 Weatherproof enclosure. > Note: - ...
UFLOW AUTOMATION
DN: 0.25, 0.375, 0.5, 0.125 in
Voltage: 24, 12, 230, 110 V
Temperature: -30 °C - 180 °C
... Surges.Easy coil changes coil lockable in 4X90 position or freely movable in between as require. Coil Housing Epoxy square coil, Metallic round enclosure, IP-67 Flameproof enclosure, IP-68 Weatherproof enclosure. Note ...
UFLOW AUTOMATION
DN: 15 mm - 100 mm
Voltage: 24, 110, 230, 12 V
Temperature: -30 °C - 180 °C
... coil changes coil lockable in 4X90 position or freely movable in between as require. > Coil Housing: - Epoxy square coil, Metallic round enclosure, IP-67 Flameproof enclosure, IP-68 Weatherproof enclosure > Note: - ...
UFLOW AUTOMATION
DN: 8 mm - 150 mm
Voltage: 12, 24, 110, 120, 230 V
Temperature: -15 °C - 60 °C
VMR VMR60 Safety solenoid valves for air and gas, fast opening and fast closing type The VMR type valve is a fast opening solenoid valve that is ...
Elettromeccanica Delta S.p.A.
DN: 1.5 in - 56 in
Voltage: 12, 24, 110, 220 V
Temperature: -15 °C - 80 °C
Model BTE / BFE, a Solenoid Control Valve is an electromechanically operated valve which can substitute traditional gate, ball and butterfly valves. We manufacture both ...
DN: 1.5 in - 14 in
Voltage: 110, 220 V
Temperature: -15 °C - 80 °C
A Solenoid Control Valve is an electromechanically operated valve which can substitute traditional gate, ball and butterfly valves. Providing precise pressure control ...
DN: 1.5 in - 12 in
Voltage: 220, 110 V
Pressure: 0 bar - 144.2 bar
Model DTE / DFE , A solenoid control valve with diaphragm design, is an electromechanically operated valve which can substitute traditional gate, ball and butterfly valves. ...
DN: 0.05 mm - 2 mm
Voltage: 5 V - 24 V
Temperature: 0 °C - 50 °C
... up to 70 bars Applications: flow and pressure regulation, Venturi, vacuum Manifold mount, barb or flange on request Stainless steel or brass, FPM, EPDM, PTFE seal. Suited for precision dosing in instrumentation, gas ...
gevasol
DN: 4.5 mm
Voltage: 5 V - 24 V
Temperature: 5 °C - 50 °C
Pressure compensated, high turn-down ratio proporional solenoid valve. Designed primarily for flow and pressure regulations of non-corrosive gases. In a compact size of 17 mm diameter, it can regulate ...
gevasol
DN: 0.8 mm - 4 mm
Voltage: 12 V - 48 V
Pressure: -1 bar - 12 bar
General purpose high flow proportional valve. Orifice up to 4 mm. Versatile seal (NBR, FPM, EPDM, PTFE, etc...) and body material (stainless steel, brass, Aluminum or plastic) available to adjust to ...
gevasol
DN: 25 mm
Voltage: 220, 110, 24, 12 V
Pressure: 35,000 Pa
Solenoid Valve DCF3-20A, DCF3-20B, and DCF3-20B solenoid valve is the product with the latest design of our factory, the body of this electromagnetic valve ...
Zhejiang Datian Machine Co., ltd
DN: 20 mm
Voltage: 12 V - 240 V
D20 solenoid valve is the product with the latest design of our factory, the body of this electromagnetic valve is shaped by adopting brass forging, having the characteristics and use ...
Zhejiang Datian Machine Co., ltd
Pressure: 35,000 Pa
Solenoid Valve D20-U is the product with the latest design of our factory, the body of this electromagnetic valve is shaped by adopting brass forging, having the characteristics and use ...
Zhejiang Datian Machine Co., ltd
DN: 12 mm - 50 mm
Voltage: 12 V - 230 V
Temperature: -27 °C - 80 °C
Series 2/529 - Solenoid valve for hydrogen H2 and high pressure applications 2/2-way servo-operated piston valve - ATEX 2/2-way solenoid valve NC ...
ALPHA AUTOMATISMES Sarl
DN: 8 mm
Voltage: 12 V - 230 V
Temperature: -40 °C - 80 °C
... 071 - Solenoid valve for hydrogen and very high pressure applications 2/2-way solenoid valve with servo-controlled piston - ATEX 2/2 way valve NC ...
ALPHA AUTOMATISMES Sarl
DN: 1 mm - 8 mm
Voltage: 12 V - 230 V
Temperature: -40 °C - 80 °C
Series 8/100 - High-pressure solenoid valve for hydrogen, pneumatically operated 2/2-way valve, with piston, direct pressure operated - ATEX NC - Valve normally ...
ALPHA AUTOMATISMES Sarl
DN: 0.5 in - 2 in
Temperature: 180 °C
Pressure: 0.3 bar - 16 bar
... pneumatic valve works: Valve body: The pneumatic valve has a body that contains all the necessary components. The body is designed to allow the passage of air or gas and to accommodate ...
DN: 13 mm - 50 mm
Voltage: 24, 230 V
Temperature: -20 °C - 130 °C
• Seat valve with diaphragm • Pilot operation. • Closed without current (NC) • Special joints NBR FKM, EPDM • Material: brass, stainless steel
DN: 8 mm
Voltage: 6 V - 240 V
Temperature: -10 °C - 50 °C
Series of spool valves with hard anodized aluminum body, with static seals and high flow for NAMUR interface mounting. Available according to ATEX 2014/34/EU, in calssifications Ex nA, Ex ia, Ex dm, Ex d, Ex mb. For ...
DN: 8 mm
Voltage: 22 V - 28 V
Temperature: -25 °C - 70 °C
Series of valves with NAMUR interface in stainless steel AISI 316L, especially suitable for food, chemical, pharmaceutical, OIL&GAS and mining industry. Conforming to 2014/34/EU Directive, certified II ...
DN: 1.2, 1.5 mm
Voltage: 24, 12 V
Temperature: -10 °C - 50 °C
Direct control valves 2/2 or 3/2 are used for operation of pneumatic cylinders with little bore size or for auxiliary functions. Available in the version with solenoid operation , with M5 and 1/8” ports ...
DN: 0.125 in - 2 in
Temperature: -10 °C - 140 °C
Pressure: 0.1 bar - 20 bar
... Protection class IP65 When using a connector Materials Brass housing (CW617N) Valve seat made of brass (CW617N) Interior components made of stainless steel Sealing material made of NBR or ...
Temperature: 0 °C - 60 °C
Pressure: 0 psi - 131 psi
• Solenoid valve with explosion proof structure, for safety and reliability. Original poppet system virtually eliminates air leaks.
DN: 1 mm - 2.3 mm
Temperature: -10 °C - 140 °C
Pressure: 40 bar
Connections:M5 Body Material:Brass Valve functioning:2 Way Direct Acting Valve type:General Purpose Solenoid Valves
ODE
DN: 3 mm
Temperature: -10 °C - 13 °C
Pressure: 0 bar - 16 bar
The direct-acting solenoid valve made of plastic The combination of high-performance plastic with particularly corrosion-resistant magnetic steels makes the EAV 800 perfect for demanding applications ...
AVS Römer
Voltage: 12 V - 230 V
Pressure: 0 psi - 120 psi
... Technology manufacturers the SV series solenoid valves offering a complete range of options designed according to NAMUR VDI/VDE 3845, as well as non-NAMUR style valves. For NAMUR style ...
Voltage: 27 V - 32 V
Temperature: 0 °C - 55 °C
Pressure: 2 bar - 8 bar
... pneumatic module. The outputs and the compressed air supply are connected to the module via a 8 mm plug-in tube connector. All metal parts accessible from the outside are made of stainless steel. Sealing material is Viton. ...
DN: 9 mm
Voltage: 12 V - 240 V
Pressure: 210, 100 bar
Solenoid Operated Directional Valves, Actuated Directional Spool Valve, Directional Control Spool Valve CML High Back Pressure Type Solenoid Valve ...
DN: 6 mm
Voltage: 12 V - 240 V
Pressure: 210, 100 bar
Solenoid Operated Directional Valves, Solenoid Actuated Directional Spool Valve, Directional Control Valves CML solenoid valves ...
DN: 20 mm - 200 mm
Voltage: 24 V - 240 V
Temperature: -30 °C - 105 °C
... and S4X are pilot operated valves made for easy field servicing. Parker’s S4 solenoids are the refrigeration industry’s standard for solenoid valves and have provided decades of safe ...
Parker Refrigerating Specialties Division
DN: 2.59, 0.76, 1.27 mm
Voltage: 5, 12, 24 V
Temperature: 0 °C - 70 °C
Parker’s 11/25/26 miniature solenoid valves are designed for medical, analytical, and clinical devices that require reliable consistent performance with low outgassing. Parker’s 11/25/26 miniature ...
Parker Precision fluidics Division
DN: 0.3 mm - 8 mm
Voltage: 24 V - 230 V
Temperature: -10 °C - 190 °C
... Normally Closed G 1/4" Solenoid Valves are used in a wide variety of applications with or without pressure differential. Ideally suited for air, liquids and gases, these valves are mainly ...
Parker Fluid and climate Controls Europe
DN: 0.625 in - 2.125 in
Voltage: 120, 24, 240, 208 V
Temperature: -40 °C - 82 °C
Sporlan offers a wide array of high quality replacement. Each Solenoid parts kit is factory tested to ensure trouble-free performance. Markets: • Refrigeration Features and Benefits: • Class F coils • It has ...
Parker Sporlan Division
DN: 0.125, 0.5 in
Voltage: 24, 12 V
Temperature: -40 °C - 40 °C
... installed as a single valve for point-of-use applications or mounted on aluminum bar manifolds for centralised applications. Viking Xtreme is a fully featured valve that has multiple ...
DN: 1.5, 2.2 mm
Voltage: 24 V
Temperature: 5 °C - 90 °C
... tube. This design avoids using the traditional valve seat and membrane which can cause turbulence in the fluid flow and create dead areas in the valve housing where medium or dirt can collect. The valve ...
A. u. K. Müller
Please specify:
Help us improve:
remaining