- Hydraulics - Pneumatics >
- Valve >
- Metal solenoid valve
Metal solenoid valves
DN: 0.063 in
Voltage: 12 V - 240 V
Temperature: -10 °C - 50 °C
The VDW size 1 is available with resin, brass or stainless steel body with orifice size up to 1/16 inch. Resin body is offered with one touch fitting to reduce installation time. Maximum Cv is 0.07. •Normally Closed ...
SMC Corporation of America
DN: 0.79 mm - 1.59 mm
Voltage: 12 V - 24 V
Pressure: 0 bar - 69 bar
The AG Series solenoid valve gives you a highly adaptable design for practically all applications requiring flow between CV 0.019 and 0.300. This robust 2- or 3-way miniature solenoid ...
DN: 40 mm - 150 mm
Voltage: 24 V
Pressure: 250 psi
... LP). The BERMAD 1000 is at the leading edge of control valve design, providing a valve that is free of the typical limitations associated with standard control valves. A unitized flexible ...
Temperature: -54 °C - 204 °C
Pressure: 350 bar
SOLENOID VALVE POPPET, 2 WAY, NORMALLY OPEN Solenoid-operated, 2 way, normally open, poppet-type, screw in hydraulic cartridge valve, designed to function as a load ...
DN: 6 mm - 15 mm
Voltage: 230 V
Temperature: -5 °C - 180 °C
Sizes: 6mm (1/4") to 15mm (1/2") End Connections: Standard-BSP, Optional-NPT Construction -Body: Brass forged IS 6912, SS ASTM A351 Gr. CF8. Optional-SS ASTM A351 Gr. CF8M. Fluids: Air, water, gas, vacuum, light and heavy oil, mild corrosive ...
DN: 2 mm
Temperature: 5 °C - 60 °C
Pressure: 0 bar - 6 bar
This is a main model among our non-diaphragm valves. It is a 2 mm orifice-size class valve and both types of a moulded plastic body and a stainless steel body are available. *This is ...
DN: 0.125 in
Temperature: -10 °C - 130 °C
Pressure: 18 bar
... °C ÷ +130°C Ambient temperature: -10°C ÷ +50°C Body material: stainless steel (AISI 303 EN 10088-3) Orifice material: stainless steel (AISI 303 EN 10088-3) Operator material: stainless steel Seal ...
DN: 0.125 in
Voltage: 24, 220, 110 V
Temperature: -10 °C - 140 °C
The solenoid valves series "W" can be directly actuated, servo-assisted or with mixed actuation. These solenoid valves, produced in the 2/2 N.C. pneumatic function, are ...
DN: 12 mm - 80 mm
Voltage: 12 V - 400 V
Temperature: 140, 90, 80 °C
Body material Brass Diaphragm material EPDM PN (End) PN10 End BSP Female/Female Voltage 12-24-48-110-230-400 VAC / 12-24-48-110 VCC
DN: 15 mm - 300 mm
Voltage: 380, 220, 110, 24 V
Temperature: -25 °C - 185 °C
• Connection Type Screw BSP/NPT/DIN/RC Flange DIN, GB, ANSI, JIS • Regulation accuracy: 5% • Explosion class: Non-explosion-proof ,Flameproof Exd II BT4
DN: 0.8 mm - 2 mm
Voltage: 12 V - 230 V
Temperature: -10 °C - 80 °C
... to 80ºC (no freezing) Ambient : -10ºC to 50ºC Materials in contact with media Main Valve: Aluminium, Stainless Steel AISI 316, Brass Solenoid Operator Stainless Steel ...
BACCARA AUTOMATION
DN: 0.5, 0.25, 0.375, 0.125 in
Voltage: 12 V - 230 V
Temperature: -10 °C - 80 °C
CESI 03 ATEX 344 Extension No. 01/12 (other certifications e.g.EAC, INMETRO, CCOE etc. on request) VALVE CONSTRUCTION Seal material NBR - FPM - EPDM Housing Red colour alloy (painted with epoxy powder) FEATURES Maximum ...
ACL S.r.l.
Voltage: 12, 24, 110, 220 V
Temperature: -10 °C - 80 °C
Pressure: 0 bar - 50 bar
B SERIES SOLENOID VALVE B series solenoid valve is equivalent to Burkert type solenoid valve. It has a high protection class, IP ...
XHnotion
DN: 10, 12, 19, 25 mm
Pressure: 6 bar
NO DIFFERENTIAL PRESSURE SOLENOID VALVE FOR STEAM 2/2 NO differential pressure solenoid valve for STEAM - Brass Body and seat - Internal parts in stainless steel ...
TUNING Fluid Solutions SARL
DN: 13 mm - 40 mm
Voltage: 24 V - 230 V
Temperature: -10 °C - 80 °C
DN: 0.25 in - 2 in
Voltage: 24, 42, 110, 230 V
Temperature: -10 °C - 200 °C
... /C and pressure from 5 to 150 psi (0.3 to 10 bar) - Manual Override - Degreased Version - EEx Solenoid- Latching Coil ndumart Series SVP500 Solenoid Valves are suitable for processes ...
DN: 1 mm - 50 mm
Voltage: 220, 230, 240 V
Temperature: -10 °C - 130 °C
Body material: brass (CW617N EN 12165) Orifice material: stainless Steel (1.4305 EN 10088/AISI 303) Operator material: stainless Steel Protection class: IP 65 (with connector and gasket) OPTIONS Available ...
Genn Dih
DN: 0.25 in - 5.5 in
2 Way Solenoid valves • Internal pilot operated 2 way solenoid valves, suitable for air, water and oil. • a. 1/4" to 11/2" 2 way diaphragm operated valves. ...
DN: 1 mm - 5.2 mm
Voltage: 12 V - 230 V
Temperature: -10 °C - 180 °C
Body Material Brass CW617N Pipe size G1/8″, G1/4″, G3/8″, G1/2″ KV From 0,05m3/h to 0,47 m3/h Seal NBR, FPM, EPDM, PTFE Options Manual Override Electroless nickel plating Degreased for Oxygen use Others on request Applications Water ...
R2G Fluidics Srl
DN: 0.75, 1 in
Voltage: 12, 24, 48, 110, 230 V
Temperature: -40 °C - 80 °C
SV Series Solenoid Valves manufactured for jet pulse filter’s dust cleaning. Sizes from 3/4″ to 3″. Explosion Coils on request. Usage Areas Powders, Jet-Pulse Filters Etc.
DN: 0.25 in - 2 in
Voltage: 12 V - 230 V
Temperature: -10 °C - 80 °C
... -way valve Impulse with differential pressure Body Brass, Stainless Steel Pilot operated piston design valve. The mentioned minimum pressure difference between inlet and outlet ...
GSR Ventiltechnik GmbH & Co. KG
DN: 0.125 in - 0.25 in
Voltage: 12 V - 230 V
Temperature: -10 °C - 180 °C
S101 Series general purpose solenoid valves are direct acting type, developed for filtered water, low viscosity oils etc non-corrosive liquids as well as pressurised air, inert gas etc non-corrosive gas ...
Doruk Endustri Ltd.
DN: 0.3 mm
Voltage: 32 V
Temperature: 5 °C - 50 °C
P08 Spider µProp-Valve - 2-way proportional miniature NC valve - Compact geometry with an outside diameter of 8 mm - current controlled Technical Data Function: 2/2 NC proportional Connection: ...
Staiger GmbH & Co. KG
DN: 0.375 in - 2 in
Voltage: 5 V - 35 V
Temperature: 2 °C - 90 °C
... Features * Valves close automatically when leakage, and alarm. * Power Supply with 2 AA, 5 batteries. * Automatically alarm when power is lower, and valve close eight hours later * Controller ...
DN: 15 mm - 32 mm
Temperature: -10 °C - 150 °C
Pressure: 0 bar - 15 bar
... CW617N, magnetic parts in stainless steel and the seal in FKM (Viton®) YES: for water up to 150°C. NO: for gas and steam. No need for a minimum operating pressure. NC with FKM seal The 84 series consists of solenoid ...
Brandoni
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining