Metal solenoid valves

DN: 3.6 mm
Voltage: 6, 12, 24 V
Temperature: 0 °C - 50 °C

... Manifold mounting » Long life Series K8B pilot operated solenoid valves represent the evolution of Series K8 which has been equipped with a flow amplifier. Their particular design makes these valves ...

DN: 0.5 mm - 0.7 mm
Voltage: 6, 12, 24 V
Temperature: 0 °C - 50 °C

... performances » Manifold mounting » Long life » Version for use with oxygen available Thanks to their particular design these valves can be used in applications where very compact solutions are required as well as ...

DN: 0.8 mm - 2.5 mm
Voltage: 12, 24 V
Temperature: 0 °C - 50 °C

The Series PD directly operated solenoid valves are available in the 2/2-way normally closed (NC) version. Pneumatic interfaces allow installation on manifolds in horizontal or vertical position. Also ...

Voltage: 12, 24, 220, 230 V
Temperature: -10 °C - 140 °C
Pressure: 0 bar - 50 bar

PNEUMAX offer a vast range of solenoid valves in brass and stainless steel designed to control air, water, steam and all fluids that are compatible with the materials (body and seals) ...

DN: 10, 15.5 mm
Voltage: 24 V
Temperature: -5 °C - 50 °C

... aluminium body and feature integrated electrical connections, manual override and solenoid valve on/off indicator LEDs. The 3000 EVO series extends Pneumax’s offer of solenoid valves ...

Temperature: -10 °C - 130 °C
Pressure: 10 bar

... following configuration: •Solenoid-spring valve •Solenoid-solenoid valve Pneumax solenoid valves have 1/4” ...

DN: 1 mm - 6 mm
Voltage: 24, 110, 230 V
Temperature: -10 °C - 80 °C

... controlled solenoid valve operates without differential pressure up to 90 bar, even in closed media circuits. It is therefore perfect for high-pressure and dispensing applications. • Extensive pressure ...

DN: 40, 50, 13.5, 27.5 mm
Voltage: 24, 230, 110 V
Temperature: -10 °C - 80 °C

... pressure: force pilot operated pneumatic valves VZWF control high pressures with high nominal diameters using relatively small solenoids. • High flow rates • Large nominal diameters with relatively ...

DN: 13 mm - 50 mm
Voltage: 110, 230, 24 V
Temperature: -10 °C - 60 °C

The poppet valve with diaphragm seal for control of air or water is suitable for all-purpose use with either medium. • Brass or stainless steel casting design • Electrical connection via solenoid ...

Temperature: -10 °C - 180 °C

... stopper pneumatic valves (series PV-FLUID*) and ball or butterfly valves with a rotary actuator (series RV-FLUID*). Solenoid valves can be classified according to their ...

DN: 8 mm
Voltage: 12 V - 220 V
Temperature: -15 °C - 50 °C

... Hz): 30 Max input pressure (bar): 010 Max torque for coil nut (Nm): 1 Response time (ms): 8÷15 Product series: Valve PIV on base Time (Cycles): 25 million Type: Electro-pneumatic on base Voltage tolerance: ...

DN: 15 mm
Voltage: 24 V - 220 V
Temperature: -10 °C - 50 °C

• Possible assembly on single and multiple bases • Monostable manual actuation as standard • Assembly in any position • Operation with filtered lubricated or unlubricated • Low power absorption Quantity per package: 0 Minimum ...

DN: 1.5 mm - 6.2 mm
Temperature: -10 °C - 140 °C
Pressure: 0 bar - 20 bar

DN: 0.25, 0.375, 0.5 in
Temperature: -5 °C - 60 °C
Pressure: 1 mbar - 1,500 mbar

... which is activated by an electric coil. The solenoid pilot valve shutter in NBR nitrile rubber or Vulkollan®, is an integral part of the actuator mobile core. Both the orifices of the 2-way solenoid ...

DN: 0.25, 0.35, 0.5, 0.125 in
Pressure: 0.5 mbar - 1,500 mbar

DN: 0.5, 1 in
Temperature: -5 °C - 60 °C
Pressure: 0.5 mbar - 1,500 mbar

... techniques and of the in-depth knowledge of our technicians. This series of solenoid valves is patented. The DDN solenoid valves are direct drive, two-way, two-position ...

DN: 1.3, 1.8 mm
Voltage: 12, 24 V
Temperature: 0 °C - 55 °C

... Fast response time • Low heat rise/low power • Robust stainless steel "Spider" flat armature spring • Designed to accommodate large flows with more stroke Specifications *********** Valve Type: ...

DN: 0.6, 1, 1.5 mm
Voltage: 6, 12, 24 V
Temperature: 0 °C - 65 °C

... ultra-low leak applications Specs: ------- Valve Type: 2-way bi-directional or 3-way normally-closed & universally ported Ports: Inlet and outlet through manifold + 3-Way: Exhaust through top of valve Operating ...

DN: 0.23 mm - 1.8 mm
Voltage: 20, 10 V
Temperature: 32 °F - 120 °F

Clippard's next-generation DV Series valve is now available in a 2-Way proportional control version! The new DVP Series provides a high degree of control and customization. Available in manifold mount or #10-32 mounting ...

DN: 6.5 mm
Voltage: 12, 24 V
Temperature: 49, 135 °C

This extended performance, high speed dispensing valve performs consistently under high pressure and high temperature conditions. Featuring a welded stainless steel construction with ports conveniently ...

DN: 6.5 mm
Voltage: 12, 24 V
Temperature: -20 °F - 275 °F

This miniature, 2-way, normally closed solenoid valve is capable of controlling small volumes of liquids or gasses. It can achieve response times as fast as 500 μs and operate at speeds up to 500 Hz. ...

Voltage: 24 V
Temperature: -20 °C - 80 °C
Pressure: 3 bar - 10 bar

Assists machine designers in complying with the European Machineries Directive Can help existing machinery to comply with PUWER (Provision and Use of Work Equipment Regulations) Controlled increase of downstream pressure ...

DN: 3 mm
Voltage: 230, 24 V
Temperature: -25 °C - 80 °C

... Suited for fine vacuum 1,33·10-3 mbar Assembled oil and grease-free For a.c. solenoid systems with integrated rectifier (40 to 60 Hz) These solenoids are ATEX and FM, CSA, XP approved Medium: ...

DN: 2 mm
Voltage: 230, 24 V
Temperature: -25 °C - 80 °C

... fine vacuum down to 1,33·10-3 mbar Assembled oil and grease-free For a.c. solenoid systems with integrated rectifier (40 to 60 Hz) These solenoid valves are ATEX and FM, ...

DN: 1.6 mm
Voltage: 24, 240 V
Temperature: -15 °C - 50 °C

Material: Housing: Brass · Pin and spring: Stainless steel · Seals: NBR Power input: DC 5 W / AC 6.5 VA

DN: 1.6 mm
Temperature: -20 °C - 90 °C
Pressure: 0 bar - 20 bar

Material: Housing: Brass · Pin and spring: Stainless steel · Seals: NBR Power input: DC 5 W / AC 6.5 VA

DN: 6 mm
Voltage: 24, 230 V
Temperature: -10 °C - 90 °C

Material: Housing: Brass · Pin and spring: Stainless steel · Seals: NBR LED - no Clock rate - 2000 cycles/min. AC [VA] - 10.0 DC [W] - 6.0

DN: 1.25, 1.5 in
Temperature: -30 °C - 75 °C
Pressure: 0 bar - 20 bar

Industries: Cement, Fertilizer, Fire Fighting Systems, Metal and Mines, Nuclear power, Oil and Gas, Thermal Power Certificates: ATEX | CCOE/PESO | CUTR-EAC | IEC Ex | INMETRO | UKRAINE | CE | UL

DN: 0.5 in
Temperature: -30 °C - 75 °C
Pressure: 0 bar - 20 bar

Industries: Metal and Mines, Thermal Power Certificates: ATEX | CCOE/PESO | CUTR-EAC | IEC Ex | INMETRO | UKRAINE | CE | UL

DN: 0.5 in
Temperature: -30 °C - 75 °C
Pressure: 0 bar - 20 bar

Industries: Oil and Gas, Thermal Power Certificates: ATEX | CCOE/PESO | CUTR-EAC | IEC Ex | INMETRO | UKRAINE | CE | UL

DN: 4.5 mm
Voltage: 12, 6 V
Pressure: 0 bar - 7 bar

Wetted metal materials - Nickel-plated brass, stainless steel, brass Wetted non-metallic materials - FKM(Optional) Dimension - 14.6*14.6*41.15 No. of ports - 2 Power - 2.5W Structure - N.C pressure compensation valve Main ...

DN: 4.5 mm
Voltage: 12, 5 V
Pressure: 0 bar - 7 bar

... materials - FKM(Optional) Dimension - 16*17. 55*51.46 No. of ports - 2 Power - 2.8W Structure - N.C pressure compensation valve Main Features - 1. Good sealing effect and large flow 2. Low hysteresis 3. High ...

DN: 2.3, 0.8, 1.6 mm
Voltage: 24 V
Temperature: 0 °F - 149 °F

Electrically controlled valves, Series 3/2 A-EVC, for vacuum and compressed air applications. Three body styles to choose from: • Manifold Mount A-DI: For mounting directly to a Mounting Plate. Gaskets and screws ...

DN: 0.05 mm - 2 mm
Voltage: 5 V - 24 V
Temperature: 0 °C - 50 °C

... up to 70 bars Applications: flow and pressure regulation, Venturi, vacuum Manifold mount, barb or flange on request Stainless steel or brass, FPM, EPDM, PTFE seal. Suited for precision dosing in instrumentation, gas ...

DN: 4.5 mm
Voltage: 5 V - 24 V
Temperature: 5 °C - 50 °C

Pressure compensated, high turn-down ratio proporional solenoid valve. Designed primarily for flow and pressure regulations of non-corrosive gases. In a compact size of 17 mm diameter, it can regulate ...

DN: 0.8 mm - 4 mm
Voltage: 12 V - 48 V
Pressure: -1 bar - 12 bar

General purpose high flow proportional valve. Orifice up to 4 mm. Versatile seal (NBR, FPM, EPDM, PTFE, etc...) and body material (stainless steel, brass, Aluminum or plastic) available to adjust to ...

DN: 6, 4, 8 mm
Voltage: 12 V

The solenoid valve is the ideal solution for applications requiring many rapid actuation cycles and installations in confined spaces. Thanks to the absence of metal parts in contact ...

DN: 4, 6, 8 mm
Voltage: 110 V

The solenoid valve is the ideal solution for applications requiring many rapid actuation cycles and installations in confined spaces. Thanks to the absence of metal parts in contact ...

DN: 4, 6, 8 mm
Voltage: 230 V

The solenoid valve is the ideal solution for applications requiring many rapid actuation cycles and installations in confined spaces. Thanks to the absence of metal parts in contact ...

DN: 0.25, 0.125 in
Voltage: 12 V - 230 V
Temperature: -10 °C - 130 °C

Seals: NBR, EPDM, FPM, PTFE Ambient temperature: +55°C max Viscosity: 21 mm2/s max. Response time: 10 to 20 ms Duty cycle: continuous (ED100%) Cycling rate: 1000 cycles/min max Electrical protection: IP65 (with plug to ISO 6952 ...

DN: 0.25, 0.375 in
Voltage: 12 V - 230 V
Temperature: -10 °C - 130 °C

Internal parts: stainless steel Seals: NBR, EPDM, FPM, PTFE Viscosity: 21 mm2/s max. Response time: 10 to 20 ms Duty cycle: continuous (ED100%) Cycling rate: 1000 cycles/min max Electrical protection: IP65 (with ...

DN: 0.375, 0.25 mm
Voltage: 12, 24, 230 V
Temperature: -10 °C - 130 °C

Seals: NBR, EPDM, FPM, PTFE Viscosity: 21 mm2/s max. Response time: 10 to 20 ms Duty cycle: continuous (ED100%) Cycling rate: 1000 cycles/min max Electrical protection: IP65 (with plug to ISO 6952 / ISO 4400) Long term use in ...

DN: 0.75 in - 3 in
Voltage: 12 V - 230 V
Temperature: -10 °C - 160 °C

... CONTROL PULSE SOLENOID VALVE, NORMALLY CLOSED Application : Compressed Air , dust collector services Size : 3/4"..3" Working Pressure : 0,5…8 Bar (3/4”…1 1/2”); 3…8 Bar (2”…3”) Coil, Tube ...

DN: 0.5 in - 2 in
Voltage: 12 V - 230 V
Temperature: -10 °C - 80 °C

The S8011 (NO) is a 2/2 way manual reset solenoid valve that is suitable to use in applications that deal with gas or fuel oil such as natural gas lines, factories, and houses. The unit is also suitable ...

DN: 0.75 in - 3 in
Voltage: 12 V - 230 V
Temperature: -10 °C - 160 °C

... Series TORK dust collector valve, pulse solenoid valves are normally closed position. (shaker valves, diaphragm valves are another names of pulse valves) ...

DN: 0.25, 0.125, 0.375 in
Voltage: 0 V - 30 V
Temperature: -10 °C - 50 °C

... propotional electromagnetic valve for flow regulation of gases or liquids Design Features leak integrity 1 x 10-9 smL/sec of helium rigid metallic construction Description PSV ...