Mixers

Capacity: 1.1 l - 15 l
Empty weight: 28 kg

STANDARD FEATURES: • 1 HP drive, 115 volt, 50/60 Hz, single phase, 20 amp motor. • Mixer and controls are wired and include a cord and plug. • IP55/NEMA 12 motor. • Variable speed control from 500 -10,000 rpm (+/- ...

Engine power: 1.5 ch - 100 ch
Empty weight: 41 kg - 955 kg

STANDARD FEATURES: • 1.5 HP through 200 HP. • Driven by an explosion proof inverter duty motor. • Standard single stage rotor/stator supplied with either disintegrating, slotted, square hole, or fine screen stator head. • Stainless ...

Engine power: 1.5 ch - 100 ch
Empty weight: 57 kg - 1,195 kg

STANDARD FEATURES: • 1.5 HP through 200 HP. • Driven by an explosion proof, inverter duty motor. • Designed to bolt to a standard ANSI fl ange. • Equipped with a single mechanical seal designed for vacuum operation. • Standard single ...

Engine power: 0 kW
Capacity: 200 l

... until the mixing target is achieved. The patented design allows to automatically and continuously adjust different parameters in order to actively control the mixing. Furthermore, it leads to a better system performance ...

Engine power: 0 kW
Capacity: 300 m³

... Process Pneumatic Blender is suitable for highly abrasive and fragile products, with different bulk density and particle size that need frequent cleaning cycles, (available in ATEX, DAIRY, GMP versions) and uses compressed ...

... an economical mixer that provides quality workmanship, design excellence, performance and reliability of high performance at an economical cost. The Chemineer QED Plus Mixer combines Quality, Economy ...

Capacity: 100, 1,000 l

... types. Mixer Support Lightweight stainless steel bridge which mounts directly onto the IBC frame and is secured in place with quick action toggle clamps. Lifting Options As standard the mixer ...

Capacity: 10 l - 40,000 l

... robust, high quality mixers. With mixing volumes from 10 - 40,000 liters and the ability to custom size mixers to suit your requirement, Chemineer has a mixing solution ...

Capacity: 100 l

Conical mixer / vertical cone mixer and powder blender (AM) Ideal mixing quality for dry, moist and viscous materials at variable filling levels The spiral mixing ...

Engine power: 1 kW - 346 kW
Capacity: 100 l - 50,000 l

amixon® powder mixer: Vertical mixer / vertical twin-shaft mixer (HM) "Very gentle and best mixing quality for dry, moist and viscous materials at variable filling ...

Capacity: 500 l - 3,000 l

amixon® powder mixer: KoneSlid® precision mixer "The amixon® KoneSlid® precision mixer is characterized by particularly short mixing and discharging times, amongst ...

The I-AMX MC-V is a two-component solvent based adhesives mixing equipment with viscosity control. Specially recommended for lamination industry. The system mixture in the desired ratio of adhesive and the catalyst ...

Engine power: 3 kW - 30 kW
Capacity: 3 l - 20 l
Flow: 3 m³/h - 20 m³/h

We have many different type of workhead stator-rotor design for top/bottom high shear mixer. If you need any more informations about our high shear mixer, please feel free to contact with us. High ...

Engine power: 3 kW - 37 kW

TRL-H SHEAR-PUMP produced by Xingsheng Company has the following characteristics ： 1. Enormous savings in time 2. Suitable for extremely varied batch sizes 3. Low noise, stable operation 4. For applications where low stress on products 5. ...

Engine power: 4 kW - 37 kW
Flow: 0.5 m³/h - 5 m³/h

The TRL-B EFFICIENT ONLINE MIXER SYSTEM produced by Xingsheng Company has the following characteristics: 1.Have mixed, stirring, decentralized, heterogeneous, emulsion, homogenized, and other functions, high ...

Engine power: 37 kW - 180 kW
Capacity: 1,500 l - 7,500 l

CONSTMACH Twin Shaft Mixers offer a robust and compact design with thorough mixing of all aggregates. With its large output capabilities from 1 m³ to 6 m³ and fast mixing time, CONSTMACH ...

Engine power: 18.5 kW - 37 kW
Capacity: 750 l - 3,000 l

... gearbox to the main shaft of the mixer. Thanks to the automatic lubrication system, bearings of the mixer shaft is always lubricated as long as the mixer is operated regularly. As all ...

Engine power: 15.5 kW - 37 kW
Capacity: 750 l - 3,000 l

... one or two mixing stars that rotate themselves while also rotating around a central point, allowing each arm to cover the whole mixer floor in a number of revolutions. This powerful mixing ...

SK3000E E Type Blade Intermeshing Kneader is a state-of-the-art mixing equipment designed to integrate multiple functions in a single machine for high-volume processing of high viscosity polymers and ...

Engine power: 0.37 kW - 800 kW

SK3000S Kneader is ideally suited for operations involving mixing, kneading, reaction, polymerization, crystallization, compounding and heating or cooling of materials up to many million centipoise viscosity. SUNKAIER ...

... filling level, speed, geometry and mixing tool adjustment as well as the throughputs but is extremely short compared with a continuous Ploughshare Mixer. The mixing chamber is divided ...

... cncrgy savings. Other important features arc thc degree of protection IPC5, reduced dimensions andrcduccd maintenance. Thc agitator is designed for quick tool change according to the various processing stages: heating ...

EVO propeller stirrer with electric speedvariatorContinuous motion tool for milk processing and cheese making. It allows tovary the speed of the treatment in a precise and reliable way accordingto the working times. Speed regulation is ...

Propeller stirrer Milk processing tool and continuous motion milk processing and cheese making tool. It allows to vary the speed of the treatment in a precise and reliable way according to the working times. The propeller stirrer ...

The Supramix vertical ribbon mixer for solids and powders by Bachiller, is especially suitable for the mixing and industrial homogenisation in short time of powdery products and those with similar particle ...

... horizontal turbulence ploughshare blender for solids and powders ideal for intense and fast mixes, suitable for all types of products, including very disperse granulation and densities. Its high performance makes this ...

... high accuracy double shaft paddle blender for solids and powders, suitable for all kinds of mixing products, especially for those with a fragile morphology that need to be respected. The Instamix double ...

Engine power: 30 kW - 100 kW
Capacity: 2, 4, 6, 8, 10 m³

Blend concrete agitators are designed for use inside tunnels. The constant and homogeneous mixing of the materials is guaranteed by a high efficiency Hardox mixer in the hopper, and is ...

Capacity: 5,000 l

pre-owned, new SUMMIX conical screw mixer Type DF-500_M3B, 5.000 litre volume - complete sanitary welded vessel, conical vessel part with dished head, - designed for FV/+3,5 bar, +10/+150°C incl. - bottom outlet ...

Capacity: 100 l - 30,000 l

... industries, it ensures a unique and gentle mixing process. Small drive power without mechanical or thermal product demolition by wear/attrition High mixing result and effciency, perfect blending ...

Capacity: 100 l - 20,000 l

... CCD with a central shaft agitator was developed to be used both as a dryer (e.g. for filter cake) and also an evaporator when products have to pass a critical phase change from fully liquid to final bulk solid. The robust ...

... industries - automotive, furniture, building materials, etc Static mixers are a plastic tube with a spiral inside. It is applied for the mixing of 2K polymer products of various viscosity. Mixers ...

Static mixers Sulzer Quadro - a new generation of mixires for mixing two-component polymer materials. The design of mixers Sulzer Quadro provides more efficient mixing ...

Engine power: 1.1, 0.75, 0.55 kW
Capacity: 0.1 l - 55 l
Empty weight: 58 kg - 800 kg

... of these 3D shaker mixers results in the shortest mixing times and thus an extremely gentle mixing process. The mixers are easy to operate and enable hygienic work. You ...

Engine power: 3, 4, 5.5 kW
Capacity: 40 l - 1,000 l
Empty weight: 1,200, 2,000, 4,600 kg

... cardanically suspended mixing vessel and ensures exact implementation of the three-dimensional mixing movements. The mixing movements of the dyna-MIX® enable gentle, uniform and always ...

... to work with paste-fill and allowing the input of a grease flow into the bearings and seals of the mixing shafts assuring a perfect isolation of the mixing tan; Exit drains with adapted flanges designed ...

Mixer-RAP 2530 system is a specially designed solution for adding recovered asphalt pavements directly into the asphalt plant’s mixers. Equipment configuration: RAP Cold bin RAP Feeding belt Scalper Elevating ...

... famous ARCEN's mixers expertise applied to the asphalt mixing; Solid quality that runs smoothly: solid steel body preciously machined, cast iron elements with generous thickness, powerful gearmotors; Batch mixers ...

Engine power: 1.1 kW
Capacity: 10 m³ - 50 m³
Empty weight: 18 kg

LV Lateral Agitator The LV Lateral Agitator is assembled to the tank ball valve, the shaft is inserted into the tank and is operated by simply pressing the stop/start switch, it is designed as a portable ...

Empty weight: 17 kg - 24.5 kg

... the mechanical sealing system allows these agitators to provide optimum mixing capacity in a wide variety of applications. All this makes LMDS agitators economical and high performance. ...

Engine power: 0.25 kW - 5.5 kW

Lateral Agitator LMD/LECO The LMD and LECO side agitators are particularly suitable for the maintenance and mixing of products in medium and large volume tanks. Both models are installed ...

... particular shape to allow a complete mixing of the product. • Stainless steel hopper easily removable for clearing and washing; special seal on the transmission shaft in order to avoid product leakage from the mixing ...

Engine power: 0.2 kW - 2.2 kW
Capacity: 300 l - 1,000 l

Agitator supports for IBC tanks are specifically designed for this type of tank, and consist of a bridge where the agitator is anchored and sockets for the shafts of a mechanical forklift or a stacker, ...

Engine power: 0.1 kW - 90 kW

Lateral agitators are units with a short agitation shaft, with a single agitation element at the end. Pimecsa has side agitators that allow the mechanical seal to be dismantled in the event of a breakdown, ...

Engine power: 0.8 kW - 30 kW

The bottom stirrers are equipment with a short tree, with a single stirring element at the extremity, either marine propeller, dispersing disk or ananas microniseur (bottom microniseur). APPLICATIONS In processes where a minimum agitation ...

Capacity: 1,600 l

With a capacity up to 1600 L and 1000 kg product load, CMS MCSP blender is the perfect match for pharmaceutical OSD medium batches powder blending: - All electrical architecture (no hydraulic components) - From ...

Capacity: 2,200 l

With a capacity up to 2200 L and 1500 kg product load, MCS blender is well-suited for large batches pharmaceutical OSD production with simple handling devices thanks to its ground loading ability: - All electrical ...

Capacity: 3,000 l

... architecture) - All electrical or hydraulic actuators - 30° blending angle (2 pedestals configuration) - Automatic loading of container in cage with trolley (option) - Several blenders ...

Capacity: 50 l - 15,000 l

... such as mixing tank, mixing tank lid, agitator, shaft seal, etc. can be made of carbon steel or stainless steel according to different process requirements. A transmission device (motor or reducer) is ...

Engine power: 2.99 ch
Capacity: 1,000 l
Flow: 100 m³/h

Mixing Tank Characteristic ● Internal shape: vertical drum shape (inner cylinder is in contact with liquid medicine) ● Inner material:316L(imported from Japan) ● Outer material: 304 mirror board or matt plate ● ...

Capacity: 30 l - 150 l
Flow: 250 l/min
Empty weight: 10 kg

A stirrer excellent in stirring with a foaming suppressed. Stirring of about 30 to 150L is possible. ○ Adopts a stirring body that is excellent for stirring that does not involve air. ○ Uses an aluminum air motor that can be stirred ...

Capacity: 36, 65 l
Empty weight: 20, 40 kg

... attaches a lever band type CTL-36,43 container, rotates the entire container and mixes the contents. ○ It can be used for mixing powder and granules in the pharmaceutical manufacturing process that cannot be done with ...

Capacity: 30 l - 200 l

... Accessories: Pressure mouth, safety valve, pressure gauge [PPS-P]/peep window [NM]/manual two-sided ball valve [BV]/stirrer [mixer] Vertical stirrer connection part ... 4.5S Helle Liquid part material ... SUS316 ...