DN: 0.125 in
Pressure: 0 bar - 400 bar
Mini Needle Valve, Tradinco T1700 Special instrumentation-needle valve for vacuum and pneumatic pressures up to 400 bar. Excellent feel and low torque allows high ...
Pressure: 125 psi
Nickel plated brass micro needle valves offer adjustable flow in a small package. MNV-10-32MM 10-32 Male UNF x 10-32 Male UNF Max Pressure 125 psi Orifice Size Flow Coefficient: Cv: Cracking ...
Pressure: 35 bar
It is used to control the flow for regulator or pipe system
DN: 0.125 in
Pressure: 70 psi - 300 psi
... Adjustable Needle Valve is a pneumatically triggered single-acting valve that can be used with an internal spring close (single action) or may be connected for air closing without the ...
DN: 0.25 in - 4 in
Pressure: 10,000 psi
Temperature: -54 °C - 538 °C
... of lightweight Monoflange isolation valves that are ideally suited to a wide range of instrumentation applications via standard flanged pressure take-off points. The compact design incorporates the Isolation valve ...
Budenberg
Pressure: 310, 210 bar
Flow rate: 10 l/min - 380 l/min
This valve is a non-pressure compensated, fine-metering, adjustable flow control valve.
Comatrol
DN: 2.5 mm
Smooth operating spindle made of PTFE, valve bore: 0-2,5 mm, with retaining device to avoid complete unscrewing, screw cap and retaining device made of PP, operating temperature: -20 to +150 °C, made of DURAN® tubing, ...
... High stability The needle uses linear motion for high reproducibility and no hysteresis. There will be no fluctuations in the valve opening even if there are sudden pressure fluctuations or vibrations. ■Maintenance ...
DN: 2, 1.5, 1.25, 1 in
BEULCO gate valves enable safe shut-off of parts of the pipeline network or a system. The slides are designed so that spindle overruns and spindle breaks are not possible. The gate valve is equipped ...
DN: 0.5 in - 2 in
Pressure: 209 bar - 690 bar
Temperature: -54 °C - 538 °C
... mounting of bonnets not wetted to avoid seizure and leaks Smooth valve actuation, even under high pressure, leads to fault-free operation and long service life Metal valve seat with leak-tested ...
DN: 6.35 mm
AIR LINE SHUTOFF VALVE, NEEDLE AIR VALVE, BSP (FF) Air valve, BSP (FF). Needle air valve.
DN: 0.25 in
AIR LINE SHUTOFF VALVE, 1/4" BSP (FF) Needle air valve 1/4" BSP (FF).
Pressure: 0 bar - 4,200 bar
Temperature: -20 °C - 80 °C
... aforesaid valves allow not only to fill, but also to carry out the delivery under pressure with nominal diameters being double compared with the valves that are normally on the market for the pressure ...
Pressure: 1,400 bar
MULTI-COUPLING SYSTEM S.r.l. designs and manufactures oil-hydraulic and hydrodinamic groups and plants for the most varied industrial sectors and for specific applications. The company was established in Legnano (MI), but soon the development ...
Pressure: 16 bar
Temperature: -20 °C - 40 °C
Outlet valve for gas cartridges • Adjuster for metallic gas cartridges • according to DIN EN 417:2012 • outside thread M 10 x 1 • CE-0085CQ0255
DN: 0.5, 0.25, 0.75 in
Temperature: -20 °C - 50 °C
Opening / closing system: The most frequent application of these valves is in installations where the flow is interrupted regularly. Valve design: Needle valve Maximum ...
DN: 20 mm
... accessory for valves manufactured by Aplisens. It is constructed using 316 stainless steel. This needle valve operates with a medium temperature. Order codes for VM-1 are 1/M, 1/G, ...
DN: 12, 14 mm
One kind of fitting accessories is a needle valve VM-1-R7R with 316ss materials used. This product can operate in medium temperature and it works on pressures. It has no vent port and is packed by graphite. ...
DN: 50 mm - 100 mm
Pressure: 0 bar - 200 bar
Temperature: -20 °C - 100 °C
Needle valve Flow regulation for liquids and gases Operation: Seat and plug of the needle valve NV are conical shaped. By lifting or lowering the plug, the available ...
POMTAVA valve is a pneumatic needle valve, closed at normal state and opened with pressurized air. The closing is done with a spring. Version VPT1-04S is designed with a bellows sealing ...
POMTAVA valve is a pneumatic needle valve, closed at normal state and opened with pressurized air. The closing is done with a spring. Made in stainless steel, o'ring in FFKM. Version ...
Temperature: 60, 100 °C
Flow rate: 4 l/min - 15 l/min
... of flow control valves offers excellent, economical, independent flow control, which can be used in any application where a needle flow control valve is required. SERIES CV100 ...
MPB INDUSTRIES
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 90 °C
... thread, as well as flange adapters. Slanted seat valves (free flow valves) Valve casing and top made of stainless steel, gunmetal or silicon bronze, valve seat made ...
DN: 0.375 in
Pressure: 700 bar
⅜" - 18 NPT connections Ensures system safety and control
DN: 0.5 in
Pressure: 0 bar - 8 bar
Temperature: 4 °C - 90 °C
Fine Flow Needle Valve Product Code - 22272908011 Name - Fine Flow Needle Valve Material - Reinforced Polypropylene Color - Orange Hydraulic Connection - BSP 1/2″ Seal ...
TEFEN
DN: 16 mm
Temperature: -40 °C - 125 °C
... engine, battery, cabin, e-machine. Coolant Flow Control Valves are needed inside this system for shutting off the coolant flow, switching over coolant circuits and regulating the coolant flow. The valve ...
DN: 80 mm
suction valve for horizontal, subterranean storage tanks, with siphon protection (liquid column up to 2.5 m) and pressure relief valve.
BelGAS Standard Needle Valves offer four choices in 316 stainless steel, as well as one piece forged carbon plated steel, soft seat and hard seat, angle and globe styles. The Mini valve ...
Please specify:
Help us improve:
remaining