Oil pumps

Hand Pump The Hand Pump is ideal for those awkward or hard to reach oil top-off applications such as gearboxes, lathes, and milling machines. Supplied with outlet hose and anti-drip ...

Pressure: 1.7 bar - 3 bar
Length: 85, 132 mm
Width: 72, 99 mm

Volumetric manual pump; each activation tallies with the pre-set quantity of lubricant. The lubricant is delivered by a plunger piston driven by a mechanical spring, suitably sized and preloaded. Tank ...

Flow: 8 l/min - 180 l/min
Pressure: 2 MPa - 25 MPa

1. Combinning special internal designs and strict engineering disciplines has reduced noise level to new lows in whole pressure zone. 2. Depending on variety of application needs, multiple optional unique control methods are available. ...

Pressure: 300 bar

Hydraulic Gear Pump – B3 Series | 38 – 125cc/Rot • - Medium Size • - Fast to Mount • - Bidirectional • - Rear and Side Inlet/Outlet Bidrectional Hydraulic Gear Pump – B3 series First of all it’s ...

Flow: 0 m³/h - 100 m³/h
Pressure: 16, 24, 40 bar
Head: 80 m

Type KMB is a volute casing pump with housing dimensions according to ISO 2858 and simple magnetic coupling. The size selection is limited. The pump has a permanent magnet coupling, and the containment ...

Flow: 0 l/h - 1,800 l/h
Pressure: 15 bar
Power: 1.5 kW

... vegetables, sauces, starch, vegetable puree, whey, conserve, fat, eggs, wine, gelatine, malt, homogenenized food, olive oil, vegetal oil.

Flow: 0.15 m³/h - 30 m³/h

... gear design. Self priming pump. Bi-direction positive displacement pump. Application Refineries. All kind of mineral Oils. Printing inks. Dyes and Resins. Glycerin and Glycol. Bitumen. Fuel ...

Flow: 0.5 l/min
Pressure: 689 bar
Length: 387 mm

... allowing the addition of cooling fluid, these pumps can easily be used to pump both solvents and CO2 3. Remote Diagnosis Even with our robust designs, unforeseen problems can occur. In-order to ensure ...

Flow: 6, 1, 15 l/min
Length: 180, 165 mm
Width: 230, 160 mm

Electric gear pump for an intermittent use, for the transfer of low viscosity oil, antifreeze (A), diesel (D), water (W). Protection category IP55. Pump body in brass, gears in bronze ...

Flow: 25, 55 l/min
Head: 14, 19 m
Power: 0.37, 0.75 kW

... IP 44 MATERIALS - Pump body: Stainless steel AISI 304 - Pump body cover: Stainless steel AISI 304 - Motor support: Cast Iron - Impeller: Brass - Connectors: Brass - Shaft with rotor: Stainless ...

Flow: 700 m³/h
Head: 130 m
Power: 200 kW

Anti-corrosion standardized horizontal centrifugal pumps type PHN Construction Single-stage horizontal centrifugal pump, single, in conformity to EN 22858 / ISO 2858 standards Sold either with unfitted ...

Pressure: 0 bar - 7 bar
Head: 70 m

MIT air diaphragm transfer pumps have multiple applications which give opportunity to be used at high flow rated and particulated fluids. MIT air diaphragm pumps are very useful at cleaning oil ...

Flow: 1,054 m³/h - 25,884 m³/h
Head: 3.71 m - 10.1 m
Power: 45 kW - 860 kW

... efficiency. They are used to pump a liquid at moderate pressure from lakes, ponds, marine catchments The impellers are of the heliciodal type that guarantee the maximum water flow. Characteristics The SVH electric ...

Flow: 7 l/h
Pressure: max 0.3 bar

... Tiny footprints Description The EDS03 is a plunger pump. Spring-loaded valves on the intake and output side allow the pump to aspirate easily during operation. It is possible to operate the pump ...

Flow: 0.2 m³/h - 30 m³/h
Head: 0 m - 310 m
Power: 0.25 kW - 30 kW

... size. SKC pumps are designed for operation with medium inflow or as a normally sucking pump after prior installation of non-return valve in the suction pipeline and pump and suction system ...

Flow: 0 l/min - 25 l/min
Pressure: 0 Pa - 2,000,000 Pa

The Yamada air-powered pump is a reciprocating type pump that is driven by compressed air. The pump consists of an air motor section to drive the pump and a lower pump ...

Flow: 1,200 m³/h
Pressure: 16, 24 bar
Head: 160 m

Horizontal End Suction Pumps, design in accordance with ISO 2858. ​Materials : Cast Iron, Ductile Iron, Bronze, SS 304, SS 316 Flange : PN16/ PN 25 Applications : Petrochemical & Chemical ...

Monostage centrifugal pumps with closed impeller for thermal oil Max flow m³/h 350 Max pressure bar 10 Pumped fluids Thermal oil up to 320°C

Flow: 0.03996 l/s - 0.1577 l/s
Pressure: 75 psi - 2,000 psi

... while pump is stopped, as a safety precaution and for tamper resistance. Stroke length is adjustable for a turn-down ratio of 10:1. Available with or without motor. Oil bath gear lubrication eliminates ...

... air-driven pump produces medium to high liquid pressures and services oil, water and compatible chemicals. The Model S-216-J standard pump is offered in ten ratios (area of large air ...

Flow: 26 l/min
Pressure: 2 bar
Power: 80 W - 350 W

... eOP is a high power density cooling pump developed for oil cooling and lubrication applications in the market. It targets high flow low pressure conditions from the hydraulic perspective and includes ...

Pressure: 50 bar - 700 bar
Weight: 12 kg

... The foot pedal is operated in one movement and the system is activated and instead of manpower, it only serves to transfer oil to lifters. • Hydropneumati

Flow: 0.1 l/min - 2,400 l/min
Fluid temperature: -30 °C - 150 °C

... calls for reliable components. Whether in lubrication oil applications or in processing plants, a pump is required to work reliably and longlasting. Thanks to the extensive range of components and pump ...