Outlet valves

DN: 80 mm - 250 mm
Pressure: 0.4 MPa - 0.8 MPa
Temperature: 150 °C

... 4" butterfly valves are operated with 80x90, and the square outlet of the output shaft is 12x12mm. 5 "and 6" butterfly valve adopts 125x90 degree head, and the square outlet ...

Temperature: 37 °C - 41 °C

Model SP157A is a scald protection bleed valve. Recommended for high ambient temperature locations where extreme heat or hot sun might cause internal water overheating. Flushes water through line when internal water temperature ...

... maintenance Energy-efficiency Product details Shuttle valve is used to automatic switchover the high pressure pipeline and low pressure pipeline. Valve has A inlet、B inlet and C outlet. ...

DN: 150 mm

Our divider "Quadripok" has four outlets equipped with ball valve shutoffs. It allows to split one supply into several outlets. There is almost no pressure loss thanks to its full waterway. ...

Pressure: 0 psi - 220 psi
Temperature: 0 °C - 60 °C

Inlet NPT : 3/4" Max Pressure : 0-220 PSI Mesh Size : 2.5-3 Outlet NPT : 3/4" Temp. Range : 33-140°F

Temperature: -29 °C - 121 °C

... Sealant 24 Injector 25 One Way Outlet Valve 26 Emergency Seal Device 27 Sealant 28 Worm 3. 2 The valve makes plug rotate in the chamber by hand wheel so as open or close. 3.3 - The hand ...

DN: 50 mm - 600 mm

Use : Handling used/Gate used for the handling of solids (ganular, pulverulents…), and main application in exit of silo. Body shape : Wafer Type : 1511 Tightness: Metal/metal Face to face : According to manufacturer standard Operation ...

DN: 15 mm - 150 mm
Pressure: 16, 40, 50 bar
Temperature: -40 °C - 280 °C

Fully lined or stainless steel Sampling Valves for safe and representative sampling of corrosive and aggressive process media from pipelines, pressurized or under vacuum. Gaseous samples can be provided by means of the ...

DN: 10 mm
Pressure: 10 bar
Temperature: 65 °C

Front control valve, inlet and outlet copper tube 10x1mm, for water TECHNICAL FEATURES Media: Water Maximum pressure: 10 bar Maximum temperature: 65° C Fluid identification: EN 13792 Design: ...

DN: 15, 20 mm
Pressure: 10 bar
Temperature: 0 °C - 65 °C

... connection of plastic and gunmetal according to DIN EN 1717 inlet and outlet with check cartridge free from dead spots for horizontal installation, drain valve down maintenance requirements ...

DN: 150 mm - 250 mm
Temperature: 310 °C

... presented angle valve works in the Pątnów Power Plant on the water vapour installation with the temperature of 310ºC. In order to maintain working parameters and meet the permissible volume standards, two silencing ...

DN: 15 mm - 50 mm
Pressure: 25 bar
Temperature: -20 °C - 120 °C

... ON/OFF differential pressure control valve DPCV Additional information Material - DZR Brass Typology - Dynamic balancing Connection - ISO 7/1 DZR brass ON/OFF differential pressure control valve ...

DN: 1 in - 18 in
Temperature: -10 °C - 230 °C

The Disc Bottom Outlet Valves used for draining vessels, tanks and pipelines. It is mostly used in chemical, petrochemical and pharmaceutical industries. The disc valves is suitable to ...

DN: 80 mm - 300 mm
Flow rate: 20 m³/h - 1,200 m³/h

Hydraulic control valve used to reduce the inlet pressure to a preset lower level pressure in the outlet by means of a three way plastic reducing pilot incorporated. This valve controls ...

DN: 12.7 mm - 76.1 mm
Pressure: 10, 8, 6 bar
Temperature: -20 °C - 140 °C

... through the body. The valve can be actuated either manually or pneumatically and controlled by control units and solenoid valves. A standard diaphragm valve is used to shut the flow ...

Vatac Resilient Seat Through Conduit Gate Valve are designed and manufactured API 6D, the gate is under closing status, and the seat surface PTFE Sealing Ring forms an initial sealing, when the gate valve ...

DN: 1, 2, 3 in
Pressure: 3,000 psi - 15,000 psi

... torque and rapid opération. The plug valve consists of the valve body, plug cap, plug and etc. The plug valve is available with the union inlet and outlet connection and ...

Although Rotolok manufactures a stock range of round and square outlet valves 165, 215, 265, 320, 370 and 420mm, mainly to match Screw Conveyor outlets, a full range of standard and heavy ...

DN: 25 mm - 300 mm

Dueker gate valves – for water and gas.Sophisticated technology. Fully-fledged gate valves. Dueker service connection valves are essentially the same as gate valves ...

DN: 50 mm - 300 mm
Pressure: 10 bar - 40 bar
Temperature: 70 °C

... functions air valve TALIS TWIN AIR ensures air control in the network: its efficiency and robustness have been proven by field experience. TWIN AIR offers the possibility of connecting additional pipes to both degassing ...

DN: 80 mm - 500 mm
Pressure: 40, 16 bar
Temperature: -29 °C - 225 °C

... top flange DIN EN ISO 5211 full bore INTEC K200 - 2-piece Flanged Ball Valves INTEC K23x: Free outlet, clearance volume free. The ball valve revolution for all condition ...

Suction Valve Cconnects the tank and the piping. Attach this accessory to the chemical tank outlet to easily and reliably connect the tank and the piping. The built-in strainer also prevents the ...

Pressure: 0 bar - 7 bar

... microfluidic valve for injection or selection of up to 10 different fluids or chips. The flow is bidirectional in the valve. The device can be used as a selector or as a distributor for either multiplexing ...

DN: 4 in
Temperature: -51 °C - 204 °C

Railroad tank car low profile bottom outlet valve Features Robust engineering design Special tank car low profile interface Self relieving seat technology Low emissions stem seal technology High ...

Pressure: 60 psi - 100 psi

Positive Displacement Dispense Valve with Luer Lock Style Outlet The MV250-LL Positive Displacement Valve is a true positive displacement metering valve capable of ...