Fans

Rotational speed: 2,800 rpm
Noise level: 10 dB

Don't give hearing damage a chance! The Sound Absorbing Fan (SAF) reduces noise by more than 10 dB, reducing the risk of hearing damage. The exhaust fans from the SAF series are equipped with sound insulation ...

Air flow: 3,000 m³/h - 22,000 m³/h
Rotational speed: 2,900 rpm

... by frequency inverter The SIF is a central fan with an insulated case made for general filtration- and welding fume extraction systems The SIF ventilation fans are designed for use as central fans. ...

Air flow: 2,400 m³/h
Diameter: 200, 160 mm
Rotational speed: 2,800, 3,400 rpm

... the UltraFlex, Flex, T-Flex extraction arms FAN-28 is a wall-mounted extraction fan FAN-28 is especially designed to fit the large diameter (200mm) arms in our extraction arm program. ...

Air flow: 500 m³/h - 1,870 m³/h
Noise level: 52 dB - 63 dB

... radial fans on KryosROOF provide high flow rates and heads to ensure the correct airflow within the cabinet. In addition, there is a high efficiency version with EC fans and an active control probe, ...

Air flow: 1,000 m³/h - 35,000 m³/h

The Extractair® is a centrifugal fan that allows the evacuation of polluted air to the workstations. Installed on the roof and connected to piping networks, it is used to: - Cleaning and air renewal; - Cooling ...

Air flow: 1,000 m³/h - 35,000 m³/h

... of hot environments, - acceleration of drying and evaporation, - extraction of vapours and steams. The Nylair® fans are axial fans covering a wide flow range (1000 to 35000 m3/h). They of course, ...

Air flow: 500 m³/h - 45,000 m³/h

The Chopperline is an automatically or manually cutter bar adjustable chopper. It is the central unit of any pneumatic waste management system. It is designed to carry out two separate functions. Its turbine chops the waste into small ...

Air flow: 1,200 m³/h - 1,200 m³/h
Rotational speed: 600 rpm - 1,300 rpm

DFB 16 Professional fans – battery powered This quiet running, battery powered fan is light and compact and can be used in public places like restaurants, bars, at events, workshops, as well as ...

Air flow: 2,200 m³/h - 19,200 m³/h

The highly durable Master mobile ventilators with high air flow are designed to support drying, heating and cooling equipment. It can be used in rooms to provide improved ventilation, air circulation and to dry moist areas. Available ...

Air flow: 2,600 m³/h

Master CD 5000 ventilator 2 600 m3/h Master portable ventilators support drying, heating and cooling equipment. Such devices can be used in rooms that need improved ventilation and air circulation, as well as help in drying moist areas. Available ...

Air flow: 0 m³/s - 198.218 m³/s

... EFFICIENCY WITH THE REVOLUTION HVLS FAN The Révolution® is Rite-Hite’s original Hiah Volume. Low Speed (HVLS) Fan and today’s standard for low cost, high-efficiency climate control, delivering the most ...

Designed for manual parcel loading and unloading CoolMan 2800 Trailer Fan swivels on unique bracketing to service two loading dock openings Easy vertical or horizontal adjustment using T-style handle for full access ...

Air flow: 8.5 m³/h - 1,000 m³/h
Noise level: 33 dB - 75 dB

... mounting system, for plates from 1 mm to 3.7 mm thick. The installation of FF Series filter fans does not require the use of tools. • The FF Series filter fans connect very quickly using a cage clamp ...

Air flow: 41 m³/h - 800 m³/h
Noise level: 43 dB - 62 dB

... • The GF Series filters and filter fans can be fixed using patented jacks. The fastening system works on plastic or sheet metal panels up to 16 mm thick. • Changing the media of the filters and filter fans ...

Air flow: 420 m³/h - 620 m³/h
Noise level: 63 dB - 64 dB

... limited space on the front and side panels. According to the ambient conditions these units can operated with fan (forced air) or without a fan (natural air convection). • The structure of the TP Series ...

Bomaksan branded BAF model fans are specially designed to work with extraction arms. Bomaksan BAF series fans are preferred thanks to their high suction power and their ability to serve for a long time ...

... type of fan in which air or gas enters axially and exits radially with the direction of the blades is called RADIAL VENTILATOR. Belt and pulley driven fans drive the rotor by means of a mechanical ...

Diameter: 1.5, 2, 2.5, 3 m
Rotational speed: 180, 130, 95, 70 rpm
Noise level: 35 dB

SUNON HVLS Fan has a lighter and stylish look. The airfoil combines aircraft-grade aluminum with a patented winglet design, it reduces the wind resistance and wind noise. Suitable for users who don’t have high ceilings, ...

Diameter: 4, 5, 5.5, 6.1, 7.3 m
Rotational speed: 115, 90, 65, 60, 50 rpm
Noise level: 50, 46 dB

Different from most large industrial ceiling fans on the market that rely on rapid turning speeds to generate unsteady and uneven airflows, Powerful HVLS Fan series 10 large industrial ceiling fans ...

Diameter: 4.2, 3.6, 3, 2.5 m
Rotational speed: 56, 70, 100, 150 rpm
Noise level: 40 dB

Powerful HVLS Fan series 3 is suitable for cooling a large space, it reduces body temperature efficiently and heat dissipation evenly. The high-efficiency BLDC direct-drive motor shows remarkable results and does not ...

Air flow: 0 m³/h - 1,000 m³/h

Fans are used in combination with duct on KEMPER welding smoke exhaust arms, telescopic arms and suction hoses. They are used for venting or ventilation wherever filtering the air is not important. Due to the cast silumin ...

Air flow: 0 m³/h - 3,000 m³/h

Fans are used in combination with duct on KEMPER welding smoke exhaust arms, telescopic arms and suction hoses. They are used for venting or ventilation wherever filtering the air is not important. Due to the cast silumin ...

Air flow: 2,000 m³/h - 4,000 m³/h

Central fans are the ideal solution when large amounts of air need to be moved. They are put to use in combination with duct on welding fume extraction tables, hoods and arms. Fans are used everywhere ...

NESTRO fans are the heart of every extraction system - proven, efficient and durable. If the fan is installed on the raw gas side, it blows into the filter system and is referred to as an overpressure ...

NESTRO transport fans transport the material to be filtered, e.g. in long pipelines or in the event of high volume flow requirements. They support/relieve the burden on the extraction fans.

NESTRO fans are the heart of every extraction system - proven, efficient and durable. If the fan is installed on the clean gas side, it sucks air through the filter system and is referred to as a vacuum ...

Air flow: 15,000 m³/h
Rotational speed: 2,755 rpm - 2,950 rpm
Noise level: 70 dB - 94 dB

FUMEX FBE – an energy-efficient fan designed for industrial environments which can be installed both indoors and outdoors. For expelling non-explosive gases, fumes and lighter particles with an airflow of up to 15000 ...

Air flow: 6,600 m³/h
Rotational speed: 2,890 rpm - 2,940 rpm

Radial fan for high concentrations of dust-laden air FUMEX FTE is a range of radial fans for use at high concentrations of dust-laden air. Fan housings and impellers are made from heavy-duty ...

Air flow: 600 m³/h
Rotational speed: 2,800 rpm

Centrifugal fan for smaller applications FUMEX C 600 – a compact and sturdy fan which can be installed both indoors and outdoors, designed for industrial environments. The forward-curved impeller ...

Air flow: 400 m³/h - 4,900 m³/h

Our extraction fans are produced in sizes from 400 m³/h to 4.900 m³/h in the low and medium pressure ranges. The fans are ideal for both individual extraction and larger central extraction systems. The ...

Air flow: 0 m³/h - 24,000 m³/h

... The fully galvanized fans come with galvanized grill and inlet, vibration pads, and bracket for outlet flange as standard. The fans can be used with or without our unique soundbox system. The LEX/MEX ...

Air flow: 0 m³/h - 24,000 m³/h

... The fully galvanized fans come with galvanized grill and inlet, vibration pads, and bracket for outlet flange as standard. The fans can be used with or without our unique soundbox system and are available ...

Air flow: 2,500 m³/h - 20,000 m³/h

... only the suction part of the Booth, while the assembly and production of the cabinet remains for you to handle. Our motor-fan unit is engineered to meet the required suction speed of 0.5 m/s, as specified by Carsat ...

Air flow: 3,180 m³/h - 44,430 m³/h
Diameter: 470 mm - 1,340 mm
Rotational speed: 385 rpm - 1,460 rpm

K and AC air circulators are available in different versions, with diameters ranging from 18" to 53". Noise levels are low and efficiency is high. The body is available in galvanized or stainless steel for maximum corrosion resistance. ...

Air flow: 9,600 m³/h - 52,500 m³/h
Diameter: 638 mm - 1,385 mm
Rotational speed: 393 rpm - 942 rpm

K air extractors are available in several versions, with diameters ranging from 26" to 56", direct-drive, belt-driven or cone-driven. Noise levels are low and efficiency is high. The body is available in galvanized or stainless steel ...

Air flow: 2,000 m³/h

•High power thanks to the possibility given by hydraulic motors to give a high speed to the fan •Hydraulic motor has no exhaust so can be placed directly in closed ambient •Absence of electricity makes it implicitly ...

Air flow: 2,100 m³/h

•Can be power by common home electric sockets or from small generators •Electric motor has no exhaust so can be placed directly in closed ambient •Quiet, no vibration, minimal maintenance need • Can be used in many positions or in ...

Air flow: 2,100 m³/h

... inlets in just a few moments and without the need for tools thanks to the exclusive quick eyelet system •The volute and the air fan can be washed without problems Practical centrifugal ventilator/aspirator with gasoline ...

Air flow: 120 l/min
Diameter: 24 mm
Rotational speed: 26,000 rpm

Tube fan with high airflow, economic motor and integrated power electronic. Compared to a flat fan, the Micronel D-Line offers much higher pressure and still high volume flow at the same time. Typical ...

Air flow: 313 l/min
Diameter: 30 mm
Rotational speed: 21,420 rpm

The D-line stands for continuity in terms of airflow volume and pressure. In the power axial blowers, high flow rates are combined with high pressure – in a compact package. The qualities of these wide-ranging solutions are in particularly ...

Air flow: 492 l/min
Diameter: 34 mm
Rotational speed: 21,370 rpm

The D-line stands for continuity in terms of airflow volume and pressure. In the power axial blowers, high flow rates are combined with high pressure – in a compact package. The qualities of these wide-ranging solutions are in particularly ...

Air flow: 20,700 m³/h - 36,700 m³/h
Noise level: 64 dB

... warehouses, farms, greenhouses, etc. The equipment consists of a structure made of galvanized steel and incorporates a helical fan with overpressure shutter with an automatic opening system. In addition, it incorporates ...

Air flow: 20,700 m³/h - 36,700 m³/h
Noise level: 64 dB

This type of fans provide significant air flows for the extraction and/or ventilation of industrial, livestock or agricultural premises. Main features - Structure and overpressure slats in galvanized steel to avoid ...

Air flow: 69,000 m³/h
Diameter: 1,400, 900 mm

Ceiling fans to cool in summer and save in winter DVW ceiling fans allow them to be used to ventilate in the summer and recover the stratified heat on the ceiling in winter, using the fan ...