Inner diameter: 2 mm - 60 mm
Outer diameter: 4 mm - 70 mm
Temperature: -15 °C - 60 °C
Single layer multipurpose food quality tube in flexible, transparent, class A PVC. Applications Carrying various non-pressurised liquids: water, certain acids and bases, foodstuff liquids such as milk, fruit juices, ...
TRICOFLEX
Inner diameter: 2 mm - 10 mm
Outer diameter: 4 mm - 12 mm
Pressure: 6 bar - 20 bar
THIN-WALLED CALIBRATED TUBES MADE OF POLYTETRAFLUOROETHYLENE. APPLICATIONS For the transfer of chemical products For the passage of fluids in high-temperature conditions. SECTORS OF ACTIVITY Industry Laboratories ADVANTAGES PTFE ...
TRICOFLEX
Inner diameter: 4 mm - 38 mm
Outer diameter: 6 mm - 48 mm
Temperature: -15 °C - 60 °C
Single layer PVC tube in flexible, transparent PVC. Applications Carrying non fatty foodstuffs or light alcohols Carrying non-pressurised aqueous liquids Sectors of activity Industry in general Accords Barbed ...
TRICOFLEX
Delivered length: 0.5 cm - 6.5 cm
... with a balloon catheter used as a replacement of an existing gastronomy tube (PEG, G. Tube or an existing G. Button). Feeding via a gastrostomy tube is advocated when nutrition cannot ...
Inner diameter: 2 mm - 12 mm
Outer diameter: 4 mm - 16 mm
Pressure: 0 bar - 10 bar
Cut the tube - end burr free and square, using Tube cutter ( WC1 ) and clean the edge to ensure leak tight joints. (Do not use blunt tools / hacksaw / chisel etc,.) Ensure the tube is fully inserted ...
Inner diameter: 40 mm - 254 mm
Pressure: 0.08 bar - 0.7 bar
Temperature: -20 °C - 115 °C
Flexible hose produced with exclusive technology by TECNICA SRL made of: – Addivated polyolefin resins film with anti-bacterial and anti-mildew master. – Thermo-insulating coating in netted and closed-cell of polyethylene ...
Tecnica srl
Inner diameter: 40 mm - 254 mm
Pressure: 0 Pa - 1,961.33 Pa
Temperature: -20 °C - 115 °C
... External protection in addivated polyolefin resins film. The assembly of materials for the construction of the flexible conduit does not require the use of chemical agents, glues or adhesives. SPECIFICATIONS COLOUR: ...
Tecnica srl
Inner diameter: 40 mm - 254 mm
Pressure: 0 Pa - 1,961.33 Pa
Temperature: -20 °C - 115 °C
Flexible hose produced with exclusive technology by TECNICA SRL made of: – Addivated polyolefin resins film with anti-bacterial and anti-mildew master. – Thermo-insulating coating in netted and closed-cell of polyethylene ...
Tecnica srl
Inner diameter: 1.6 mm - 17.5 mm
Outer diameter: 6.35 mm - 25.4 mm
Pressure: 0 bar - 7,000 bar
... tapered tubings are in stock for all tubing versions. For some tubing pipes, a minimum order quantity will be necessary. All tube are suitable for hydrogen application
Inner diameter: 10 mm - 54 mm
Outer diameter: 14 mm - 63 mm
... 26x3, 32x3, 40x3,5, 50x4, 63x4,5. Deltall pipe is suitable for drinking water convey according to the hygienic/sanitary prescriptions of DM n°174 dated 06/04/2004 and other European regulations. Deltall pipe ...
Unidelta S.p.A.
Inner diameter: 3.5, 5 mm
Outer diameter: 11, 15 mm
Delivered length: 13 in - 36 in
Metal coolant tube Description: Megus provides professional (machine) coolant tube for CNC machine as a Taiwan supplier to global market. We specialized in CNC coolant hoses and machine ...
MEGUS1989 International Corporation
High pressure coolant tube Description: Megus provides professional (machine) coolant tube for CNC machine as a Taiwan supplier to global market. We specialized in CNC coolant hoses ...
MEGUS1989 International Corporation
Glass-reinforced plastic coolant tube Description: Megus provides professional (machine) coolant tube for CNC machine as a Taiwan supplier to global market. We specialized in CNC coolant hoses ...
MEGUS1989 International Corporation
Inner diameter: 19 mm - 203 mm
Outer diameter: 28 mm - 225 mm
Pressure: 2.5 bar - 20 bar
Two-layer soft PVC-PHF hose with embedded galvanised steel spiral and polyester yarn reinforcement, for suction and delivery of food liquids, wine and alcohol to 20% proof.
MERLETT
Inner diameter: 0.75 in
Outer diameter: 30.2 mm
Pressure: 13.8 bar
ThermOmegaTech®’s Black Washdown Hose is a high-quality steam-rated hose used for steam/water mixing washdown applications in industrial and chemical plants. Design Features Boston Weatherhead 200 ...
Thermomegatech
Inner diameter: 125, 100, 160 mm
Special nozzles for vertical exhausts These are used as the connection between the crush-resistant rubber hose installed on hose reels or in-floor systems and vehicle exhausts. The wide range of choice ...
AERSERVICE EQUIPMENTS SRL
Inner diameter: 75, 100 mm
Positioners These are used as the connection between the crush-resistant rubber hose installed on hose reels or in-floor systems and vehicle exhausts. The wide range of choice makes it possible to ...
AERSERVICE EQUIPMENTS SRL
Inner diameter: 75, 120, 160, 150, 180 mm
Special nozzle for vehicles with dual exhaust These are used as the connection between the crush-resistant rubber hose installed on hose reels or in-floor systems and vehicle exhausts. The wide range ...
AERSERVICE EQUIPMENTS SRL
Inner diameter: 2.5 mm - 17.5 mm
Outer diameter: 7 mm - 24.5 mm
Pressure: 3 bar
... high heat resistance, highly flexible. Operating temperature: from -40º C to +125º C,peak temperature 150º C BIODIESEL HOSE ACCORDING TO DIN 73379 TYPE C Resistance against biodiesel, petrol and diesel fuel, ECO-DIESEL ...
Inner diameter: 10 mm - 100 mm
Temperature: -40 °C - 135 °C
Delivered length: 1,000 mm
EPDM - Ethylene Propylene Diene Rubber EPDM elastomers have excellent heat, ozone/weathering, and aging resistance. They also exhibit excellent electrical insulation, compression set, and low temperature properties, but only fair physical ...
Inner diameter: 6 mm - 200 mm
Pressure: 20 bar
Temperature: -20 °C - 220 °C
The metal hoses produced by DEWEL are designed for the inlet and outlet connections of rotary joints. It can avoid the tension and pressure generated by the hard pipe on the joint, thus ensuring the joint ...
Inner diameter: 99 mm
Outer diameter: 24 mm - 99 mm
Pressure: 20, 100, 40, 30 bar
... . Economical: last longer than standard pipes, no more premature wear. Supple: pipe won't buckle even in a vacuum. Efficiency: optimum flow rate for all pipe curves. Sturdiness: better resistance ...
Inner diameter: 2 mm - 18 mm
Outer diameter: 4 mm - 20 mm
The product range of plastic pipes and tubes includes many standard sizes with different temperature ranges and operating pressures, depending on the material. Versions are available in polyamide (PA 12-PHL), polyethylene (LD-PE), polyurethane ...
Pressure: 8 bar
Wire Bound Fire Hose with stainless steel wire With Storz Couplings and Plastic Sleeves for Protection of the User’s Hands. High Quality Heavy duty Fire hoses. Each fire hose comes in a white carton box.
MOBIAK
Inner diameter: 0.5 mm - 34 mm
Outer diameter: 2 mm - 40 mm
Pressure: 6 bar - 80 bar
FEATURES Bio-Polyamide 11 of vegetable origin derived from castor oil. We produce a wide range of flexible hoses in 12 different colors, linear hoses, spirals, and polytubes for various applications, thanks to the excellent ...
MEBRA PLASTIK ITALIA SPA
Inner diameter: 0.042 mm - 1.25 mm
Temperature: -18 °C - 105 °C
Offering protection from flammability, high heat, abrasion, and chemicals. Alpha tubing has the size for your wire and cable routing needs.
MöllerWerke designs and offers extruded coolant hoses according to DIN 73411.
MöllerWerke GmbH
MöllerWerke offers various models of charge air hoses with different connection types. Our charge air hoses are resistant to temperatures up to 240° C.
MöllerWerke GmbH
Our raw and clean air hoses for intake systems have a wireless connection interface resulting in tight sealing. In addition, inner wire rings ensure vacuum pressure stabilization.
MöllerWerke GmbH
Outer diameter: 5 in - 36 in
Titanium & Titanium Alloy, Nickel & Nickel Alloy, and Stainless Steel seamless & welded Pipes/Tubes with different diameters.
Inner diameter: 2.5 mm - 12 mm
Outer diameter: 4 mm - 16 mm
Pressure: 7, 12, 10, 6 bar
... Aliphatic Hydrocarbons, Oxygen and Ozone. Flexibility of PU tube is good under very low temperature. Inner wall of PU tube is very smooth for transportation of air. PU tube ...
Inner diameter: 4 mm - 8 mm
Outer diameter: 6, 8, 10, 12 mm
Pressure: 9.8 bar - 11.76 bar
... Flexibility of PU tube is good under very low temperature. Inner wall of PU tube is very smooth for transportation of air. PU tube is much lighter than rubber. ...
Inner diameter: 2 mm - 12 mm
Outer diameter: 4 mm - 16 mm
Delivered length: 100 m
Flexible and Vibration reducing Exact Dimensions Excellent Texture Maintenance free, easy to inspect visually Axial plug-in, easy assembly Long lasting Technical Data PU Spiced Joint O ...
Inner diameter: 0.3 mm - 700 mm
Outer diameter: 0.6 mm - 950 mm
... diameters up to approx 950 mm will be molded. Maximum length depends on the diameter and ranges from 100 mm to 300 mm.\ PTFE Tube Key properties Excellent chemical resistance Working temperature from -180°C to +260°C FDA ...
Inner diameter: 25 mm
Delivered length: 3 m
... the max load capacity on the RS PRO datasheet to ensure your planned constructions will be stable. • RS PRO steel square tube • Made from stainless steel • Black in colour • Length of 3 m • Width of 25 mm • Height ...
RS PRO
Vulcane Express extension hose Cat. No. 4770 Reference : 4770 With this blowtorch extension hose, designed for use with the Vulcane Express Cat. No. 472 blowtorch, for plumbing, heating and air conditioning jobs, it's ...
GUILBERT EXPRESS
Inner diameter: 0.5 mm - 25.4 mm
Temperature: -20 °C - 80 °C
Delivered length: 15 m - 152 m
Designed for secure, cost effective peristaltic pumping and transfer duties, PureWeld XL tubing provides exceptional life and accurate flow rates compared to other TPE tubing. PureWeld XL provides excellent chemical resistance making ...
Watson-Marlow Fluid Technology Group
Inner diameter: 1.59 mm - 57.15 mm
Outer diameter: 3.18 mm - 69.85 mm
Pressure: 19 psi - 100 psi
Tygon S3™ B-44-3 tubing for beverage transfer from Saint-Gobain is phthalate-free and specifically formulated to ensure it does not affect the taste nor odor of liquids moving through it, including soft drinks and juices. It is non-wetting, ...
Saint-Gobain Performance Plastics - Process System
Please specify:
Help us improve:
remaining