Piston hydraulic motors

Pressure: 0 bar - 420 bar
Rotational speed: 0 rpm - 400 rpm
Torque: 0 Nm - 13.6 Nm

... Hägglunds Atom brings your hydraulic drive system a maximum torque of 13.6 kNm. Since the motor can supply full torque at its top speed of 400 rpm, that gives it a maximum power of 394 ...

Pressure: 420 bar
Rotational speed: 14,000 rpm
Displacement: 5 cm³ - 19 cm³

The high efficient Parker bent axis design motors, with unique spherical piston concept gives thermal shock résistance. The motors are rated up to 420bar pressure levels, and speeds up ...

Pressure: 450 bar
Rotational speed: 2,400 rpm - 3,350 rpm
Torque: 737 Nm - 2,538 Nm

The DMVA motor with a swashplate design can be employed as a single or double motor. With an unrivaled adjustability of up to 22° it can be adapted flexibly to a broad conversion range according to its ...

Pressure: 0 bar - 450 bar
Displacement: 21 cm³ - 125 cm³

... variety of hydraulic circuits, such as those of hoists and fan drives. Key Features Axial piston motors can be fixed or variable displacement. Variable displacement motors ...

Pressure: 275 bar
Rotational speed: 2.41 rpm - 45.7 rpm
Displacement: 1.47 cm³ - 5.32 cm³

... displacements which can be chosen from a wide range to suit specific application requirements. Motor displacement can be changed with ease while the motor is running. > 3 displacement modes > 1,475 ...

Pressure: 1 bar - 6 bar
Rotational speed: 4,300, 4,150, 3,900, 4,000 rpm
Torque: 0.48, 0.56, 0.4, 0.6, 0.72 Nm

... existing and proven technology of the Danfoss L/K motor. These motors have been optimized with regard to options, life, package size and installed cost. The RDM is a two-position reversing motor, ...

Pressure: 280, 400, 330, 350 bar
Rotational speed: 300 rpm - 3,000 rpm
Torque: 0.15 Nm - 2.06 Nm

... DIN is a series of light weight casing axial piston motors, particularly suitable for mobile hydraulics. SAM 010-130 DIN is of the bent-axis type with spherical pistons. ...

Pressure: 500 bar
Rotational speed: 3,000 rpm - 4,500 rpm
Torque: 225 Nm - 1,100 Nm

... PMH MCF are flanged type motors PMH MKF are plug-in type hydraulic motor The geometry of the components is optimized to reduce wear and provide the most efficient oil flow. Similarly ...

Pressure: 450, 400 bar
Rotational speed: 3,600 rpm - 8,000 rpm
Torque: 28 Nm - 1,006 Nm

Hydraulic motors are of bent axis design with a 40° angle, they combine high performance and reduced size envelope. M series piston motors are designed for fixed and ...

Pressure: 0 bar - 400 bar
Rotational speed: 800 rpm - 3,000 rpm
Torque: 0 Nm - 3.9 Nm

A series of variable displacement radial piston motors with an integrated electronic control system supplied together with the motor. The variable displacement means ...

Pressure: 450, 500 bar
Rotational speed: 4,300, 3,800, 3,700, 3,200, 3,100 rpm
Torque: 374 Nm - 2,267 Nm

Standard hydraulic motors at low speeds in their starting phase cannot generate the necessary torque. Therefore, the power of the fast spinning hydraulic motors has to ...

Pressure: 23 MPa
Rotational speed: 105 rpm - 300 rpm
Torque: 3,324 Nm - 22,404 Nm

... Staffa and HMB motors. -The hydrostatic balance is built between the con-rod and eccentric sets, solving the problem of higher-power hydraulic motor of shaft con-rod, which overwhelmed ...

Pressure: 0 bar - 400 bar
Rotational speed: 3,400 rpm - 8,800 rpm
Displacement: 5 cm³ - 130 cm³

Compact Design, Economical Conception. High Power Density, High Overall Efficiency, High Rotating Speeds. High Output Pressure, Simple Change of Direction of Rotation, For Industrial & Mobile Market. Splined or Keyed Shaft.. 2PS ISO Bent ...

Pressure: 400 bar
Rotational speed: 3,600 rpm - 6,300 rpm
Torque: 126 Nm - 1,016 Nm

Piston motors interchangeable to A2FM Rexroth HA2FM Hydraut fixed displacement axial piston motors are suitable for mobile and industrial applications and for open or ...

Pressure: 0 bar - 450 bar
Rotational speed: 0 rpm - 4,160 rpm
Torque: 329, 439, 567 Nm

- High pressure hydraulic motor for hydrostatic transmissions - Low noise level - High efficiency Fixed displacement axial-piston motors in swashplate design for ...

Pressure: 250 bar
Rotational speed: 0 rpm - 3,600 rpm
Displacement: 21 cm³ - 64 cm³

Fixed displacement; can operate in open and closed loop; available in 2 design and 6 displacements of 21, 28, 35, 46, 50, 64 cc/rev; max. operating pressure 250 bar, peak 350 bar; max. output speed 3.600 rpm; SAE shafts and flanges.

Pressure: 350, 400 bar
Rotational speed: 2,700 rpm - 5,600 rpm
Torque: 681, 1,019, 1,391 Nm

Rexroth Hydraulic Motor Model A6VE Series Replace for Rexroth A6VE Series hydraulic motor Displacement 107cc - 250cc/rev The hydraulic ...

Pressure: 0 bar - 450 bar
Rotational speed: 0 rpm - 2,200 rpm
Torque: 0.62 Nm - 25.9 Nm

HCD is an High Performance Radial Piston Hydraulic Motor capable to work up to 450 bar in a wide speed range. Its Innovative Swivelling Cylinder System (Patented by Italgroup) grants ...

Pressure: 350 bar
Rotational speed: 216 rpm - 1,000 rpm
Torque: 3.3 Nm - 261 Nm

The SMA motor is able to satisfy the heaviest duty application. This is a radial piston/eccentric motor with a hydrostatically balanced rotating assembly. The efficient design includes ...

Rotational speed: 0 rpm - 2,000 rpm
Displacement: 98 cm³ - 246 cm³

Eight fixed displacement motors ranging from 6 in3 to 15 in3. Starting and stall torques equal to 90-94% of theoretical torque. Speed to 2,000 RPM continuous. Up to 75 HP continuous. Conforms to SAE 'C' ...

Rotational speed: 210, 250, 185 rpm
Torque: 305 Nm - 972 Nm
Displacement: 229 ml

HEM Motor DESCRIPTION Hydro-Gear's HEM Motors: The perfect choice for any medium-duty application. The industry's first bi-directional fixed displacement piston motor ...