Piston valves

DN: 25 mm - 200 mm
Pressure: 10 bar
Temperature: -10 °C - 90 °C

Working position: Horizontal Features •high tightness (leakproofness class – A according to EN – 12266 – 1) •environment-friendly •no maintenance •flanges drilled according to EN 1092-2 •face-to-face dimension according to 558 series 1

Pressure: 315 bar
Temperature: -40 °C - 65 °C

... value up to 0.7 - Bigger stroke of Residual Pressure Device (RPD) piston (up to 7mm) - Improve your productivity - Fit to all existing RPV connections and common industrial gases - Piston stroke (Residual ...

DN: 10 mm - 50 mm
Pressure: 63 bar - 500 bar
Temperature: -10 °C - 580 °C

body without cover – rotating rising stem – two handwheels, large wheel for opening and closing, small for removal of dirt from the seat – sealing surface is welded by hard facing (13Cr) or Stellite 6 – straight-way pattern – complies ...

DN: 2, 4 in

... Seat design prevents ponding/puddling of media on the valve piston and allows for a slight trickle of fluid. This plunger-style valve is very compact, while still configured with optional ...

DN: 15, 20 mm
Pressure: 51 bar
Temperature: 425 °C

... accompanied by a Isolation valve for isolation to maintain/repair the trap and a Bypass valve to let out the condensate uninterrupted while the trap is being maintained. This was available in the form ...

Pressure: 8 bar
Temperature: -30 °C - 150 °C

... sample valve was designed in order to take samples in a sterile manner. Effective cleaning (CIP) is assured by its special configuration plus sterilization (with pure steam) of the product contact surface, seating plug ...

A needle valve is a type of valve which can be used to regulate flow of a substance, usually either gas or water, through an appliance or system. The unique feature of the value is the inclusion of a ...

DN: 15 mm - 150 mm
Pressure: 16, 40, 50 bar
Temperature: -40 °C - 280 °C

... lined or stainless steel Sampling Valves for safe and representative sampling of corrosive and aggressive process media from pipelines, pressurized or under vacuum. Gaseous samples can be provided by means of the Piston ...

Flow rate: 55 l/min - 600 l/min

The valves for the GMV power units are packed with technology meant to last over time and offering unparalleled reliability. Hundreds of thousands of elevator systems running with our products are an unequivocal proof ...

Pressure: 16 bar
Temperature: 20 °C - 200 °C

Acts as a re-circulation loop Works under pressure as well as vacuum Directly representative sample Max viscosity = 2,000 cP

DN: 15 mm - 32 mm
Pressure: 6 bar - 10 bar
Temperature: -30 °C - 120 °C

compact piston drive medium pressure of up to 10 bar with EPDM and medium pressure of up to 6 bar with PTFE (EPDM) visual position indicator NC, NO, DA NAMUR-compliant air connections resistant to contaminated medium market ...

DN: 10 mm
Pressure: 10 bar
Temperature: 65 °C

Front control valve, inlet and outlet copper tube 10x1mm, for water TECHNICAL FEATURES Media: Water Maximum pressure: 10 bar Maximum temperature: 65° C Fluid identification: EN 13792 Design: DIN 12918-1 Inlet ...

Pressure: 0 psi - 6,000 psi
Temperature: -423 °F - 1,200 °F

... air to open/spring to close). These piston air operators provide remote automatic on/off operation of valves and can be controlled by means of an air regulator, an electrical solenoid, or a manual low ...

DN: 50 mm - 600 mm
Pressure: 10 bar - 100 bar

STANDARDS OF MANUFACTURE EN 1074-1 VALVES FOR WATER SUPPLY EN 1074-5 REGULATING VALVES EN 558 S1 (ISO 5752) FACE TO FACE EN 1092-2 (ISO 7005-2) DRILLING FLANGES MATERIALS BODY S355JR CARBON STEEL ...

DN: 0.5, 0.75 in
Pressure: 0 bar - 350 bar
Flow rate: 0 l/min - 100 l/min

This device is an end stroke valve for tipper truck-steel 3/4".

Veson valve ltd 3 position pneumatic actuators provide an operation of 0°- 45°- 90°. The intermediate position is achieved by an external mechanical stop of movement on the 2 auxiliary pistons (for spring ...

DN: 15 mm - 100 mm
Pressure: 25 bar
Temperature: 0 °C - 80 °C

DZR brass pressure reducing valve Additional information Material - Brass Typology - Dynamic balancing Connection - ISO 228/1 Direct-acting brass pressure reducing valve Threaded F/F ...

... rating 4500#: Choke valves. Pressure reducing and overflow control stations. Upstream/downstream constant pressure keeping. Leak-off control valves for minimum flow on boiler feedwater pumps. Cooling ...

DN: 15 mm - 50 mm
Pressure: 25 bar
Temperature: 130 °C

high realiability measurement calibrated DZR VENTURI high precysion setting 40 stroke positions hand wheel environment-friendly 2 quicd test points easy reset memory stop device easy pressure reading using dogital manometer engineer ...

DN: 0.25 in - 0.5 in
Pressure: 0 bar - 440 bar
Temperature: -29 °C - 38 °C

... of GAUGES VALVES: Option with purge Option with check flange with sealing plug to fit a standard pressure gauge. Option with M20x150 test bore Pneumatic piston valve. ...

DN: 15 mm - 50 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 180 °C

... designed 2/2 off valve and Y-type steam valve specialist M & M. Y-type steam valve for a variety of fluids such as water, oil, air, steam, and other corrosive fluids. Liquid temperature ...

... VDU Diverter valve has a new style that is dead space free, since there are no more crevices, nooks and other rubbish to think of. Therefore, the diverter valve is a seamless extension of plant piping. ...

DN: 2 in

This valve has been designed for an efficient discharge of large air volumes from small water network systems, filters, containers and other devices where trapped air may impair the systems operation. The valve ...

DN: 15 mm - 50 mm
Pressure: 0 bar - 13 bar
Temperature: -10 °C - 180 °C

Functioning Body material Stainless Steel CF8M (Aisi 316) ACTUATOR Stainless Steel CF8 (Aisi 304) Pipe Size G1/2” – G3/4″ – G1″ – G1 1/4″ – G1 1/2″ – G2″ SEAL PTFE PIPE SIZE ACTUATOR G1/8″ Options 3/2 Command Pilot Visual Positioning ...

DN: 0.75 in
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 145 °C

proportional motorised valve 3/4" inch made of stainless steel to control the flow in the system up to 6000 l/h with an setpoint of 0 - 10 volt FKM/FPM seal: - FKM/FPM setpoint: - 0 - 10 volt voltage: - 24V DC ...