Piston valves

DN: 10 mm - 50 mm

... 10000PCS/Mouth Croygenic Lift Check Valve JIEYU Forged Steel Check Valves are compact, sturdy and ideal for high pressure and high temperature applications. These valves ...

DN: 0.125, 0.25, 0.375, 0.5 in
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 70 °C

Throttle valve, in block shape, Anodised aluminium, Straight-way valves with restricted flow in both directions.

DN: 16 mm - 40 mm
Pressure: 0.1 MPa
Temperature: -30 °C - 150 °C

... than <1 seconds, working frequency is up to 6 times / min; As a on - off control valve using, usually mounted on the control node vacuum path; As an air gas valve using, can shorten the air charging ...

DN: 42.1 mm - 121.4 mm
Pressure: 5,000, 10,000 psi

... the well blowout or kick, the valve cover of float valve turn off the bore automatically, it will prevent well blowout accident. Float valve sub has two types: The Mode! F is a plunger-type ...

DN: 150, 300 mm

... ring on the piston and an O-ring in the body. The valve is hygienically clean thanks to targeted flushing of the piston and the secure shaft seal. Carefully positioned guide rails guarantee ...

... position-limit actuator that can reorient the pistons opening, limit, and valve flow. Furthermore, it is ideal for any angle seat valve and emergency brake in times of mechanical failures. ...

DN: 0.5 in - 2 in
Pressure: 0 bar - 7 bar
Temperature: -10 °C - 80 °C

Description 2/3-way valve Impulse without differential pressure Body Stainless Steel, Red brass

DN: 0.375 in - 3 in
Pressure: 3 bar - 16 bar
Temperature: -20 °C - 180 °C

... angle seat valves offer an excelent flow control with low pressure loss. Valves can be installed in any position preferably with actuator face up. Actuators can be rotated through 360° for tubing.   PROVAL ...

DN: 40 mm - 100 mm
Pressure: 6 bar - 10 bar
Temperature: 130, 150 °C

... one-piece valve housing and the two radial sealings of both valve seats allow, together with the balanced valve disks a perfectly safe CIP/SIP cleaning and an extremely high level of ...

USED FOR 1-2KG FIRE EXTINGUISHER

DN: 10 mm - 80 mm
Temperature: -10 °C - 250 °C

Classification:Angle valve Click:24 Date:2019/07/01 Orifice DN15-50 Pressure 0.03-1.6MPa Connection size 1/2-2、Flange

DN: 50 mm - 300 mm
Pressure: 10 bar - 16 bar

BELGICAST Float Valve Angle or straight body float valve balanced thanks to a piston, actuated by a PVC float. The construction and design have been optimized to provide a simple ...

... Angle Seat Valve Features: Compact and lightweight Large flow and low resistance long lasting... Interface: DN15--DN50 Body material: stainless steel 304 Pneumatic form: plastic head Spool seal: PTFE Stem ...

DN: 15 mm - 50 mm
Pressure: 40, 16 bar
Temperature: -10 °C - 400 °C

KLINGER KVN DN15-50 Piston valves, flange design. Features DN 15 - DN 50 piston valve valve rings KX-GT piston made of special ...

DN: 15, 25 mm
Pressure: 63 bar
Flow rate: 14, 16 m³/h

The Cryogenic Bellow Sealed Changeover Valves are made from solid stainless steel and has a PN63 flange. It is designed for the installation of two safety valves. It also includes an indicator with dual ...

DN: 0.5 in
Pressure: 2 bar - 16 bar
Temperature: 1 °C - 70 °C

Drain Valve Timer Type - Series CTD The CTD valve series represents the ultimate in valve performance. Decades of experience of valve manufacturing have allowed us ...

Pressure: 20 bar - 200 bar

Volumetric Metering Valves AXDV-C Ultimate process reliability at lowest dosage volumes – made possible by the new ABNOX Valve. It allows accurate placing of minute quantities of your complex lubricant ...

Pressure: 1 MPa

Irrigation hydrant valve is designed for the quick connection of inlet pipe of the pivot with irrigation system hydrant. Irrigation hydrant valve is installed on the pivot inlet hose with the clamps. ...

DN: 50 mm - 200 mm
Pressure: 0 bar - 160 bar
Temperature: -10 °C - 140 °C

The valves in the series EKOFLUX balance the flow in main circuits or single sections of heating or conditioning plants. They allow correcting irregularities in the supply of the single users (irregularities which might ...

DN: 0.375 in - 2 in
Pressure: 0 bar - 10 bar
Temperature: -20 °C - 150 °C

Pneumatically operated blocking valves - VNC-VDA series The pneumatically operated blocking valve provides the opening/closing function and the automation of this function in a single, space-saving ...

DN: 15 mm - 150 mm
Pressure: 16 bar
Temperature: -40 °C - 150 °C

... resistant control valve, the valve body and the inner part of the whole lining of fluorine structure, effectively blocking the corrosion of the valve in the medium of corrosion of metal ...

Pressure: 300 psi
Temperature: 149 °C

Overview This valve is installed in the downstream of sampling systems/heat exchanger. The valve responds only to temperature. Under normal operation, the valve is fully open. If the ...

DN: 15 mm - 200 mm
Pressure: 5.5 bar - 76 bar
Temperature: 38 °C

The Pennant Piston Valve (PPV) is a linear movement valve in which a stainless-steel piston travels between the upper and lower seal ring. These rings are separated by ...

DN: 1.411 mm
Pressure: 50 psi - 25,000 psi

... Pressures. Provide Air Signal. These valves perform a function similar to a pressure switch. The sensing piston or plunger movement is spring or air adjusted. When the sensed pressure ...

E-Motion valves line represents the generational shift from hydrodynamic valves. Highly recommended for hot forging, forming and extrusion presses. Possibility to use power from water with a fully ...