Plastic caps

Diameter: 1.5, 1.25, 1 in
Operating temperature: 0 °C - 80 °C

VAE plastic caps are specially used to close pipe ends. Besides, 1-1/4″ VAE 1250 D6 plastic caps can seal pipe ends when the number of swivel nozzles needed to manufacture ...

... The connector cap has non-slip gripping surfaces that allow fast removal, can be fitted on both sides and impresses with a functional registered design. The plastic used consists of post-consumer recycled ...

... The connector cap has non-slip gripping surfaces that allow fast removal, can be fitted on both sides and impresses with a functional registered design. The plastic used consists of post-consumer recycled ...

... gripping surfaces that allow fast removal, can be fitted on both sides and impresses with a functional registered design. The plastic used consists of post-consumer recycled material. HV connector covers for external ...

Diameter: 6 mm - 91 mm
Operating temperature: -35 °C - 50 °C

HOME - THERMOPLASTIC PROTECTIONS - TAPPI SALVA FILETTO PUNTALI - PUN PRINT PVC, black.

Diameter: 14.5 mm - 112 mm
Operating temperature: -30 °C - 50 °C

... shaft-protection caps are designed to provide high level of protection for a wide range of components. The caps are manufactured from high grade, yellow L.D. Polythene and are equipped with a fitting ...

Diameter: 1.8 mm - 23.8 mm
Operating temperature: -60 °C - 200 °C

The Gamm Hhgh temperature pipe protection caps are made of natural and silicone materials. They are available in various sizes upon request. The maximum size available is at a diameter of 50.8. Material Natural color silicone.

Here you have all the tools specifically designed for professional field installation of the entire Original MC4 product family. The assembly of eBOS components can make or break a PV project. It is often the small details that have ...

Diameter: 0.48 in - 4.19 in

CEC series conductive caps are for all common sizes of threaded electrical and electronic connectors. In addition to dissipating electrostatic charges, they provide an electrical shield over the end of the connector. Meet ...

DCC series caps are designed to provide electrostatic discharge protection of rectangular D-subminiature input/output type connectors. Molded with an integral flange to enable easy application and removal, Series DCC ...

DCF Series caps are designed to protect electrical connectors from dust and impact damage. DCF is available in a black conductive polyethylene copolymer or pink static dissipative ethylene vinyl acetate. * ...

Diameter: 16 mm - 40 mm

Push fit. With continuous sealing lip and strong flexible side-tab for quick and easy removal. Fit threaded or plain ports. Low-abrasion fit. Std. Color: red, RAL 3000

Diameter: 8 mm - 116.7 mm

These caps cover nuts and exposed bolts and provide effective protection against damage and weathering and improve the finished appearance of your product. Easy to fit and to remove. Std. Color: black

Diameter: 2.54 mm - 19.81 mm
Operating temperature: 177, 316 °C

Silicone Washer Caps are designed to cover threaded studs and even plug plains and threaded holes; they will mask off the stud/hole and leave a circular grounding or earthing area around it. Can be used to both cover ...

Material cap in reinforced polyamide, threaded insert in nickel-plated brass State of supply complete with prefitted threaded insert

Diameter: 60.3, 48.3 mm

Material cap in reinforced polyamide, threaded insert in nickel-plated brass State of supply complete with threaded insert

Use: for profiles part. 8018, 8018F, 8018P Material ABS Fitting:snap-fitting or gluing with epoxy or cyanoacrylate glue

Cover and protective caps for the mounting screws of the K5.3 clamping modules.

Closing the profile’s front end with an end cap protects against sharp cut edges and provides an aesthetically pleasing closure. Closure strips and cover profiles keep dirt from getting in the system slot while serving ...

Diameter: 12 mm - 55 mm

The SILICOSEN ® and BIO-SILICO ® are produced by a special process culture plugs that have regular pores and thus ideally suited for the preparation and sterilization of culture media. Due to the uniform pores and good air permeability, ...

... does not only handle plastic Plugs, but can also manufacture articles in plastic for customer design for small lots. The site www.panozzosrl.com allows the customer and/or potential customer to find ...

Diameter: 12 mm - 90 mm

... more than five thousand articles of plastic printed in various materials (pvc, hdpe, epdm, silicone, etc.) Where to find threaded protection caps? Our threaded protection caps of ...

... use of products such as metal-threaded inserts and images Plugs in plastic well in evidence. Panozzo has a warehouse of over 700 sqm. which counts more than 5,000 articles of plastic printed in various ...

Diameter: 5 mm - 110 mm

Ideal for the protection of exposed bolts and threads. When choosing the caps please note that the inner diameter should be 0.2 - 0.8 mm smaller than the outer diameter you want to protect.

Diameter: 2.9 mm - 90 mm

... external influences such as liquids or dirt. PVC pipe caps Soft PVC is particularly suitable for plugs, plug-in feet and pipe caps due to its high flexibility. It can ...

Diameter: 2.4 mm - 28.6 mm

"These caps are applicable at continuous operation up to +200°C and short-time up to +300°C. General wall thickness approx. 1.4 mm, tolerances +/- 0.25 mm"

Diameter: 0.89 mm - 9.53 mm
Operating temperature: -40 °C - 315 °C

... used over EPDM Caps for their heat resistance properties, these are a cost effective masking solution. Round Silicone End caps are a versatile product that are able to stretch over a range of diameters, ...

Diameter: 3.3 mm - 16 mm
Operating temperature: 0 °C - 315 °C

... efficiently. These Silicone Cone Caps are produced using a premium form of Silicone rubber and come with a tapered interior, allowing them to fit over a range of diameters. We stock these High Temp Silicone Cone ...

Diameter: 2.7 mm - 19.5 mm
Operating temperature: 315 °C

... high temperature Silicone Range of sizes available Colour coded Commonly Used For: As caps for masking off a stud As caps for high temperature masking

Diameter: 30 mm - 65 mm

The CAPS_TR is a polyethylene protective cap with hole, manufactured by PLASTEM. This product is generally designed for inside protection. The dimensions of this polyethylene protective cap ...

Diameter: 10 mm - 63.7 mm

EXTERNAL THREAD AND SMOOTH OPENING PROTECTION WITH PULL-OFF EAR Material: LDPE Colour : Yellow - Natural - Blue Dimensions : mm Standard : Metric (DIN13), Gas/BSP (DIN259), UNF/JIC(B1.1) Ref. AR with pull-off ear are intended for ...

Diameter: 10.7 mm - 33.6 mm

... request Dimensions : mm Standard : Metric (DIN13), Gas/BSP (DIN259), UNF/JIC (B1.1) Ref. CAPU_C is a flanged protection caps for outside cover. Quick fitting and removal Easily pushed onto usual threads

Diameter: 14 mm - 59.3 mm

Threaded caps that effectively protect external threads where, in most cases, the liquid is inside the application that is tested under pressure. Some products are available with sealing features to ensure tight closure. ...

Diameter: 13 mm - 82.6 mm

Threaded caps that effectively protect external threads where, in most cases, the liquid is inside the application that is tested under pressure. Some products are available with sealing to ensure tight closure. Soft ...

Diameter: 15 mm - 39.3 mm

Threaded caps that effectively protect external threads where, in most cases, the liquid is inside the application that is tested under pressure. Some products are available with sealing to ensure tight closure. Soft ...

Cover cap for die cast angle 27x27x28 Material: PA Color: black Packaging Unit: 10 pcs. Extras: Perfect fit with corner angle 4010 A 2727 EL 03

Cover caps for die cast angle Material: PA Color: black Packaging Unit: 10 pcs.

Optical upgrading of the profiles and protection from dirt. Material: PA Packaging Unit: 100 pieces

Diameter: 28 mm

Diameter: 9 mm - 20 mm

Combine SCAP-PT Cover Caps and SNCPS Socket Head Cap Screws for Cover Caps. The PTFE (Teflon） cover protects the screw head from corrosion caused by chemicals. PTFE is a plastic ...

... - black material: - soft Safe our HSYS caps reduce leakage currents increase the safety of employees by protecting them from physical contacts insulate conductive connection parts Clean our HSYS caps ...

Diameter: 12 mm

... cross section: - 35 mm² Safe our HSYS caps reduce leakage currents increase the safety of employees by protecting them from physical contacts insulate conductive connection parts Clean our HSYS caps ...

Diameter: 34 mm - 35 mm

... 5120351, V0 cable cross section 120 mm² height 35 mm cable outside Ø 19 – 27 mm application for: - for cable lugs assembly: - pre-assembly necessary, unlosable colour: - black material: - soft flame retardant Safe our ...