Diameter: 30 mm - 120 mm
with adjustment spindle, movable PlacoGrip® Machine levelling feet with adjustment spindle, movable Standard material Reinforced polyamide Adjustment spindle Steel zinc plated Special thread inserts upon request Standard ...
Bäcker
Diameter: 18 mm
... heavy duty and flexible, with a concentric pattern to provide grip from a large base. The Crutch Feet are easily fitted by hand and come complete with a metal washer moulded into the base to spread the weight out through ...
StockCap
Load capacity: 800, 500, 700 kg
Diameter: 40, 32 mm
Base material: PA black reinforced polyamide. Treated steel stud. Mounting with cross screwdriver on the base Optional: Non-skid rubber pad.
TECNODIN
Diameter: 100 mm
... the profiles For threads larger than M12, the hinged feet must be mounted in conjunction with the connection plate For profiles 45 x 90 und 90 x 90 a base and transport plate is required, if the feet are to be ...
Minitec
Load capacity: 75 kg - 1,000 kg
Diameter: 42 mm - 110 mm
Range of plastic feet. Reinforced polyamide Steel or stainless steel levelling rod. Fixed or tilting rod. LPP with anti-slip plate.
Diameter: 60 mm
Technopolymer Plastic Base Leveling Pads With Rubber Bottom For Anti-Skid (60mm Base)
Diameter: 30 mm
Material: Polyethylene (PE) Colour: Black Material screw: zinc plated iron Further lenghts/size upon special request All dimensions are in mm.
Load capacity: 800 kg - 1,800 kg
Diameter: 60 mm - 100 mm
JM Adjustable Feet D60mm Part# Refer to below Material of Rod: Steel Material of Base: Nylon Description: Swivel feet have a ball joint between the base and rod, thus allowing the feet to swivel to an angle of up ...
JM Aluminum Profile Accessories Co., Limited
Load capacity: 0 lb - 2,473 lb
Diameter: 50 mm
FOOT: Polyamide, Fiberglass Reinforced SCREW: 304 Stainless Steel BASE PAD: NBR Rubber FOR LOADS UP TO: 11000 N (2473 lbf) OPERATING TEMPERATURE: Standard: -5°C to +120°C (+23°F to +248°F) Nonslip: -5°C ...
Advanced Antivibration Components
Load capacity: 2,200 lb
Diameter: 3 in
Plastic feet Type HPA provides simple support of conveyors and small machines and equipment. Type HPA is available with a non-skid rubber pad and admits slopes up to 10° of floors and equipment. Dimensions in inches
Support Accessory - Support foot M8 diam. 80mm - Weight: 0.53Kg - Type of material: base in polyamide, stem in galvanized steel
Diameter: 60 mm
9 Fold Section Model : Levelling Feet Base : Special High Quality Polyamide Base with Black color. Articulated Stem: Threaded Zinc Plated Steel or Stainless Steel with regulation Hexagon Rubber Pad (N)-8lip Disks: NBR Rubber
Diameter: 30 mm
FIXED FOOT TPZP MATERIAL - SURFACE TREATMENT Pin: CI 4.8 (Steel) white galvanized Base: PA (Polyamide) COLOUR Base: Black NOTES Available in other materials, surface treatments, colours.
Berardi Bullonerie srl
Load capacity: 350 kg - 1,100 kg
Diameter: 40 mm - 100 mm
Features & Benefits Adjustable feet, as one of our initial OEM capability, we can offer widely level elements for machine and equipment customers, we can supply from a wide range of styles and sizes of stock. Application Widely used ...
HuZhou CCDM Logistics Company
Diameter: 6 mm - 20 mm
... wide range of levelling feet, latches, as well as hinges. These are all built from steel, stainless steel, plastics or even a combinations like plastic/steel. Some of the levelling feet they offer ...
pedestals are made of Polypropylen (PP-C) and can be used as a lightweight subconstruction. They can be easily installed. Heights can be adjusted accurately. BC-type pedestals can be applied as: • raised floors in industrial and commercial ...
Load capacity: 8 kg - 65 kg
Diameter: 20 mm - 60 mm
Mounting pads can be used as foot or thrust pad. Not parallel bearing surfaces up to 15° degrees can be compensated. Material Ball element Heat-treated steel, tempered, blackened Stainless steel 1.4305 Pad Heat-treated ...
Diameter: 36, 50, 70 mm
Flat base for surface mount with 10 cm extension 1 PR + 1 BS – with O-Ring, base gasket and two removable snap-shut stoppers
SIRENA S.p.A.
Designed for flat surface mounting when cabling occurs from the bottom of the device and where a compact design is required.
SIRENA S.p.A.
Designed for installation on a 1/2” NPT threaded pole.Also available in:BLACK part no. 32388WHITE part no. 32389Attention: WM wiring module and MB mounting base are essentialin the composition of the tower
SIRENA S.p.A.
Diameter: 40 mm - 120 mm
... one with the plastic bases. It is generally preferred in the heavy duty machinaries, machine tools,press machines, and so on. All the plastic bases are produced from the best raw material. As ALHAN®, ...
the best suppliers
Please specify:
Help us improve:
remaining