Temperature: 226 °F - 356 °F
Delivered length: 75 mm - 24,000 mm
... exhibits toughness when applied on subsea flowlines and risers, field joints, and equipment, such as jumpers, pipeline end terminations (PLETs), pipeline end manifolds (PLEMs), inline structures, shrouds, ...
PERMA PIPE
Inner diameter: 32 mm - 50 mm
Pressure: 10 bar
Material - PVC-U = Unplasticised Polyvinylchloride Manufacture - Made of tube
Inner diameter: 15.4 mm - 923.6 mm
Outer diameter: 20 mm - 1,000 mm
Pressure: 8, 6, 12.5, 10, 16 bar
PE Pipe For Water Supply plumbing tube pe pipe for drainage hdpe fittings plastic pipe tube Description： - Name of product ...
Huasheng Pipeline Technology Company
Inner diameter: 4, 6, 8, 10, 2 mm
Outer diameter: 10, 12, 8, 6, 4 mm
Pressure: 20, 30, 40, 60, 120 bar
Fluoropolymer tube is almost universally inert to industrial chemicals & solvents & can handle nearly any corrosive material with low permeability of the tube contents. This makes PTFE ideal for a vast ...
Colex International Limited
Outer diameter: 20 mm - 800 mm
Pressure: 8, 10, 12.5, 16, 20 bar
Specifications: Product ID :HD-PE GAS PIPE Size:20mm~800mm Specifications:PN8/PN10/PN12.5/PN16/PN20
Shie Yu Machine Parts Industrial Co., Ltd.
Temperature: 120 °C
... pre-insulated pipe Structure ①Service pipe ②Polyurethane insulation layer ③Polyethylene casing pipe Application Range： product application：Heating supply,cooling supply, Anti-corrosion ...
Tangshan Xingbang Pipeline Engineering Equipment C
Inner diameter: 1 in - 2 in
Temperature: 60 °C
Low vacuum rated to 5x10-3 Torr ISO compatible design Corrosion resistant material Applications include extended length roughing lines and mechanical pump venting Conforms to ASTM D-1785, Type 1 Refer to table for ...
Inner diameter: 27, 21, 14.1 mm
Outer diameter: 26.6, 19.1, 33 mm
Pressure: 15 bar
Stahlmann tubes bend easily without the need for special tools, without any effect on the clear opening, and without the development of microcracks and putting mechanical stress on the metal Stahlmann corrugated tubes ...
Inner diameter: 2.5, 4, 5, 6.5, 8 mm
Polyurethane Anti-Static Tube Hardness: 95A-98A Fluid: Air Environment and fluid temperature: -20℃~+80℃ Available by the meter or in 100 meter coils. It meets perfectly the requirements of electronic environments ...
XHnotion
Inner diameter: 100 mm - 600 mm
Outer diameter: 118 mm - 700 mm
Ridgidrain Plain Ended Pipes are available in diameters from 100-900mm. They are approved by the BBA, BBA HAPAS and Network Rail. Unperforated (U), half perforated (HP) and fully perforated (P) options are available. ...
POLYPIPE
Inner diameter: 16 mm - 500 mm
Pressure: 6, 10, 12.5, 16, 20 bar
Atoxic UPVC pipes for the construction of pipeline systems for fluids under pressure both for underground and above ground application. The different types of connection are: pre-inserted rubber ring ...
LARETER SpA
Temperature: -50 °C - 260 °C
Hose in Fluoride derivative by PTFE (Teflon) with a corrugated outer braid wire of stainless steel AISI 304 Maximum working temperature -50 ° + 260 ° C max Resistance to pressure as a function of the number of braids ...
Inner diameter: 10, 20, 18 mm
Outer diameter: 15, 24 mm
Temperature: -20 °C - 100 °C
... Rigid tube made out of special polyester food-grade wall, according to FDA and EU regulations, free of bisphenol A and phthalate. Applications : Very good resistance to shocks, to highly graded alcohol, wide resistance ...
... in Germany on the role of CAST IRON and PLASTIC PIPES against fire insulation to other floors through waste water pipe lines in buildings. With reference to fire insulation to other ...
Inner diameter: 80, 50, 40, 100 mm
Outer diameter: 110, 90, 63, 54 mm
Pressure: 1 MPa
the inner layer of the pipeline is lined with EVOH resin; •inner surface of the pipe conducting electrostatic layer resistance: 1.8ｘ1014 Ω • suitable for self-priming and pressure piping ...
Inner diameter: 1.666 in - 3.5 in
PTFE-pipes made by ElringKlinger Engineered Plastics, extruded or pressed, are availabe in all typical standard sizes. Other dimensions or finished parts according to drawing or special materials/compounds ...
Temperature: -57 °C - 104 °C
... Highlights Easy-to-install with precise fit Double-seal technology Built-in pressure sensitive adhesive Built-in PVC overlap tape with acrylic adhesive Scrim reinforcement on the seam surface Environmental-friendly, ...
Inner diameter: 15 mm - 600 mm
Temperature: -50 °C - 260 °C
The PTFE/PFA pipe and fittings use an improved process that adapts to the shape and dimension of the product. It can be used as a PFTE paste extrusion for spools, isostatic molding for big Tees and Elbows and for injection ...
Inner diameter: 15 mm - 100 mm
Outer diameter: 23 mm - 115 mm
Pressure: 16, 25, 40 bar
PTFE-spiral tubing (PN 10) Material: * PTFE (virgin or conductive) Other pressure rates: * PN 16 * PN 25 * PN 40
Inner diameter: 110 mm - 365 mm
Outer diameter: 110 mm - 400 mm
Delivered length: 3, 6 m
Stabilplastic SPA
Inner diameter: 15 mm - 600 mm
Pressure: 12.5, 10, 8, 6, 16 bar
SIZE: DN15~DN600 CONFORM TO: GB/T 13663.2-2018 GB/T 13663.2-2018 STANDARD: DIN
Xiamen Keheng Plastic Co., Ltd.
Inner diameter: 14 mm - 1,108.2 mm
Outer diameter: 20 mm - 1,200 mm
Pressure: 16, 12.5, 6, 25, 10 bar
... to 50% saving as compared to traditional laying) whilst still maintaining the advantageous characteristics of polyethylene pipes such as: lightness, flexibility, simple installation.
Idrotherm 2000
... The strength of the pipe is its reinforcement. Our RTP FactoryWe totally have 42 imported PE pipe production lines and 6 fully automatic film production lines. We are the largest professional production ...
CNPS.COM LIMITED
Inner diameter: 16 mm - 50 mm
BC end bush to be pressed into the end of STD & STDX pipes Material Plastic Colour Black Material quality Polyethylene (PE) Model Plug-in Halogen free Surface polished
Please specify:
Help us improve:
remaining