... Heater ● Electric Instant Water Heater ● Heating System, Gas Boiler Heat Pump ● Radiant Floor Heating, Wall-hung Boiler ● Wall-mounted solar water heater ● Dedicated pump for pressure-bearing water ...
Flow: 0 m³/h - 90 m³/h
Pressure: 0 bar - 8 bar
Head: 10'00" ft - 150'00"
... Available in pure PP or E-CTFE+carbon Magnetic version for clean liquids The integral version (instead of the common plastic flanges) and the armored version (instead of the cast-iron) both allow ...
Flow: 2 m³/h - 50 m³/h
Pressure: 8 bar
Head: 0 m - 40 m
EQUIPRO series is made of plastic technopolymers, close-coupled with an inlet pipe at the bottom and outlet pipe at the top. These pumping solutions ensure a longer life cycle and less maintenance operations. Compact ...
Flow: 8, 10 us gal/h
Constructed of sturdy ABS plastic with comfort grip handle providing smooth, firm strokes. Available in 24" (610 mm) with hose and 48" (1220 mm) with hose.
Flow: 12 l/min - 125.4 l/min
Pressure: 8 bar - 250 bar
Weight: 13 kg - 56 kg
Axial Piston Pump, Piston Pump, Hydraulic Piston Pump CML V Series Axial Piston Pump, The unique design of the swash plate for changeable angle is widely used in various ...
Flow: 5 l/min - 60 l/min
Pressure: 3.7 bar
Head: 40, 60 m
... can be used for all premixed dry mortar and site-made mixes. The Putzmeister SP 11 LMR worm pump offers lasting value, thanks to its lightweight yet robust plastic hood, for example, which can withstand ...
PUTZMEISTER
Flow: 5, 2, 4 l/min
Pressure: 0.15, 0.18, 0.1 bar
Power: 3, 5, 1.8 kW
air pumps are ideal for small hydroponic tanks and aquariums; they are great for bubble features and sensory equipment. Available in 1 or 2 outlets the ACO77 series is by far the quietest pump ...
Flow: 80 l/min
Pressure: 30 psi - 995 psi
Power: 20 W
... EP1320C 1/10 Gallon Dual Cartridge Pump System is a powerful, medium-ratio system for controlled fluid transfer from 1/10th gallon (310 ml) plastic cartridges. Suitable for silicone-type fluids, this ...
Flow: 3.6, 3 l/min
Pressure: 102, 71 mbar
Fluid temperature: 0 °C - 95 °C
This pump is designed for dispense. The use of the pump allows for flexible siting of dispense valves inside the machine, including up to approx. 0,4 metre (15,7 inch) above the water level in the boiler. Varying ...
Flow: 12.5 l/min
Pressure: 120 mbar
... Quiet •Continuous Rated •Ignition Protected Flow rate: Nominal 12.5 Litres/min (2.7 gallons/min) at 0.12bar (1.68psi) Pumps water at 100ºC
Flow: 3 l/min - 12 l/min
Pressure: 0 psi - 50 psi
Head: 22'00"
... who are unable to fulfill their unique pump specifications with an off-the-shelf solution and require a custom-engineered pump specific to their application. Please click the "Pump ...
Gorman-Rupp Industries
Flow: 12 m³/h - 118 m³/h
Pressure: 31 bar
... slurries Details: High viscosity High pressure Runs dry without damage High temperature High vacuum External bearing chamber Shaft seals available Externally timed gears ...
Flow: 0.35 m³/h
Power: 10 W
Fluid temperature: 80 °C
... filtration of small volumes on standard cartridges (extruded or wound). Excellent chemical resistance Available in polypropylene or PVDF, this filter is resistant to both acids and bases. Long-lasting ...
Siebec
Flow: 130 l/min
Pressure: 8 bar
Fluid temperature: 65 °C
Diaphragm pump in polypropylene and AISI 316 stainless steel series PPIB-1, membranes in Teflon® and Hytrel®, balls in Teflon® and seats in AISI 316 stainless steel FLUIDSWASTE OIL | FRESH OIL | ANTIFREEZE ...
Pressure: 60 psi
... Lubricator includes a spring return piston pump in a plastic reservoir. Pulling up slowly on the lever handle to the stop fi lls the cylinder with a predetermined volume of oil. Upon release, spring ...
BIJUR DELIMON INTERNATIONAL
Flow: 0 l/min - 1,400 l/min
Head: 13.5 m - 74 m
Power: 1.5 kW - 15 kW
... contact surfaces in the front and rear areas of the pump. Therefore high temperatures are avoided. This greatly improves resistance against dry running in comparison with conventional mag. drive fluororein ...
IWAKI Europe GmbH
Flow: 30 l/h - 6,000 l/h
Pressure: 0 bar - 250 bar
Power: 1.5 kW - 5.5 kW
... pressure gauge • Check valves double ball or cone depending on pump size • Connections: NPT (metallic) or flange (plastic) • Liquid-wetted material available as 316L type or plastic • ...
Bran+Luebbe
Flow: 0 us gal/min - 5 us gal/min
Length: 191 mm
Width: 139 mm
... non-stalling, lube-free air valve system in Versamatic’s ¼" (6mm) plastic air-operated double-diaphragm (AODD) pump. Engineered with original equipment manufacturers (OEMs) in mind, this AODD pump ...
WARREN RUPP
Flow: 100 l/min - 600 l/min
Head: 5.5 m - 42 m
Power: 0.4 kW - 3.7 kW
... be reduced effectively. Thus, thermal deformation and melt are prevented. Non contact system Unlike conventional magnetic drive pumps, the MXM series are designed to prevent contact between the ...
Flow: 1,181 l/h
Pressure: 12 bar
... metering pump, also known as the MACROY® pump, is now NSF/ANSI 61 and 372 certified for municipal compliance and safety assurance. Capable of handling pressures up to 175 psi (12 bar) and flow rates ...
Flow: 4 l/h - 35 l/h
Pressure: 0 bar - 10 bar
Weight: 2.9 kg
... 100% Level probe input Acid resistant plastic box IP65 protetction degree Wall or horizontal basement mounting Standard pump head: in PP or PVDF, diaphragm in ...
Etatron D.S.
Flow: 1 m³/h - 200 m³/h
Pressure: 1 bar - 16 bar
Head: 5 m - 70 m
Plastic Lined Horizontal - Single Stage - Centrifugal pump with Mechanical Seal Lining: PP (Polypropylene) Long-coupled and Close-coupled executions Versatility: Suitable for handling ...
CDR Pompe
Flow: 200 m³/h
Pressure: 10 bar
Head: 70 m
Compact and economical – the alternative to standardized pumps Close-coupled pumps MUNSCH close-coupled pumps provide many users with a compact and ...
MUNSCH Chemie-Pumpen GmbH
Flow: 48.1 l/min - 71 l/min
Pressure: 0 bar - 20 bar
Power: 0.4 kW - 2.5 kW
The 3-diaphragms pump ZETA 70 produces a flow of 71 l/min and operates at a maximum pressure of 20 bar. It is available with single or double splined/cylindrical shaft. Semi-Hydraulic diaphragm pump ...
UDOR S.p.A.
Flow: 4, 2 m³/h
Head: 14 m - 40 m
Power: 0.37 kW - 1.1 kW
Thermal protector：single phase Insulation：F ☆The impeller and middle section are high-strength engineering plastic,It's economy-oriented comparing with CMF,which is designed for domestic supply system.
Guangdong LingXiao Pump Industry Co., Ltd.
Flow: 4.8 m³/h - 31.2 m³/h
Head: 2.7 m - 23.8 m
Power: 0.33 kW - 2.2 kW
Horizontal self-priming centrifugal swimming pool pump with built-in prefilter. Perfect for ensuring water circulation in swimming pool filtration systems. Horizontal self-priming centrifugal swimming pool pump ...
Please specify:
Help us improve:
remaining