Plastic sleeves

For PTFE heat shrink tubing we provide standard shrink ratios of 2:1 and 4:1. Larger ratios are technically possible, but not standard and custom made. The shrink ratio for FEP heat shrink tubing is lower, on average 1.3:1 up to 1.6:1. ...

Diameter: 10 mm - 59 mm
Temperature: 105 °C

DAPU galvanized steel conduit covered Polyurethan IP68 Degree of protection (IP) IP68 Material Steel Colour Black Sheathing material 1st coating Polyurethane (PUR) Approved according to DIN EN 61386-23

Diameter: 19 mm - 800 mm

100 % high tenacity synthetic polyester yarn, circular woven in twill weave alternatively plain weave, warp and weft threads multiple twisted (on request with woven copper wires) standard colour: white plain; others on request ...

Diameter: 16 mm - 63 mm
Temperature: -15 °C - 90 °C
Length: 3 m

RPVC rigid conduit for the protection of electrical cables in building applications. Made of plastic material (PVC) with an IP44 protection index, compression resistance of 1250 N and impact resistance ...

Diameter: 1 mm - 50 mm
Temperature: -30 °C - 150 °C

Polyurethane Fiberglass Sleeving (PU Fiberglass Sleeving) Description PU fiberglass sleeving is non-alkali fiberglass braided, which is coated polyurethane resin ...

... Nylon (PA) single strands, Nomex, Kevlar, Kevlar Aluminum, Fiberglass Braided treated at high temperature, nylon sheath Multi filament, Braided Fiberglass resin impregnated silicone, Braided Fiberglass ...

Temperature: -40 °C - 20 °C

These gaskets are realized wrapping with one or more metallic wire mesh a foam (polyurethane, neoprene and silicone). To use where the closing are irregular or where a weak is desired strength of closing, but also a certain degree of ...

Diameter: 18 mm - 110 mm
Length: 5 m - 50 m

LN-5(Ncr) PVC Covered Type flexible metallic conduit is coated one protective layer of soft polyethylene (PVC) on the surface of LN-4B metallic conduit by special method. Besides owning ...

Temperature: -20 °C - 80 °C

Sleeve made of PVC coated Polyester fabric PVC coated high tenacity Polyester fabric, grey. Thickness 1mm. Confection. Manufacturing by welding or sewing. Good résistance in acid and basic medium. Many possibles shapes, ...

PVC conduits are used for protection and distribution of electrical (orange) and cables for telecommunication (yellow). Made of special plastic, resistant to mechanical impacts, ageing and corrosion in ...

Diameter: 1 mm - 50 mm
Temperature: -30 °C - 155 °C

Fiberglass Sleeving Coated with Polyurethane and Acrylic Structure Fiberglass sleeving coated with polyurethane and acrylic is braided with non-alkali fiberglass yarn and then coated ...

Temperature: -25 °C - 80 °C

GREMARK® TAGPUR is a Polyurethane thermoplastic material, which is a halogen free, flame retardant, hydrolysis and micro organism resistant material. The raw material fulfills UL94-V0. GREMARK® TAGPUR offers excellent solution to identify ...

Diameter: 2 mm - 51 mm
Temperature: -55 °C - 220 °C

Fluoroelastomer heat shrink tubing suitable for use in electronic systems and components in military, aerospace, automotive, and industrial applications requiring outstanding heat and fluid resistance Flame retardant Flexible Highly ...

Temperature: -55 °C - 150 °C

DESCRIPTION IPROSOFT® is a very densely braided protection sleeve. The special material and design eliminates noise caused by vibration or other external mechanical influences. APPLICATION AREAS engine compartments ...

Diameter: 3.4 mm - 5.6 mm
Temperature: -60 °C - 180 °C

... housing made of stainless steel and silicone. These units are specially coated stainless steel with silicone protective sleeve to ensure reliable industrial performance. They offer high flexibility, tensile strength ...

Diameter: 6 mm - 88 mm
Temperature: -40 °C - 85 °C

... REIKU’s patented conduit profile allows for a tighter bending radius without reducing the conduit’s inside diameter. REIKU recommends a maximum 75% conduit fill capacity in order to prevent ...

Temperature: 0 °C - 105 °C

With polypropylene insulation Thermal resistance: to +105°C Material: galvanically tinned copper According to DIN 46228 part 4

... Conductive shrinking sleeves are used for cable and connector terminals to provide efficient EMI shielding. The sleeve is a combination of heat shrink polyolefin tube and a flexible conductive layer that ...

In addition to finished components, Fluorten also produces sleeves by injection and compression moulding, depending on the size, in natural F10PEEK and filled F10PEEK, standard and special on request. The use of first ...

Diameter: 12 mm
Temperature: -45 °C - 95 °C

... Industrial / outdoor • System Metal • Outer-Ø 14 mm • Bending radius 30 mm • Outer sheath specially modified polypropylene (PP) ○ UV resistant ○ Halogen-free • Inner sheath rolled strip of galvanised ...

Diameter: 13 mm - 80 mm
Temperature: -40 °C - 140 °C

Purpose To protect the hose from excessive external abrasion and mechanical damage in rough applications. Design A lightweight black HDPE (High Density Poly Ethylene) ‘Safegard’ strip is spirally wound along the hose and secured by ...

Hoses built to measure from thermocouple cable or heat resistance cable, with many configurations. Available with up to 50 channels protected by a cover. Option to integrate different types of connectors and shielding. • Type: J, K, ...

... coloured PTFE Heat shrink tubings according to Pantone references. PTFE Heat shrink tubings of ElringKlinger Engineered Plastics have standard lengths of 1.220 mm or we can deliver much longer lengths on spools to ...

Diameter: 1.5 mm - 26 mm

◆ Material: made from PE. ◆ Usage: fix one end with safety belt first, then circle the wires clockwise to make them tighen. ◆ Application: a protection wear for electric wires, and make them insulation and look nice.

Temperature: -30 °C - 125 °C

Tubes, Heat shrinking tubes materials: polyolefine Jacket Colour: RAL 9005 jet black