... a long life. Our pneumatic cylinders are made of aluminium, stainless steel and also surface-treated steel. The piston rods in a standard cylinder are made of hard chrome-plated stainless ...
Stroke : 5 mm - 165 mm
Force: 0.95 kN - 13 kN
Speed: 0 m/s - 0.3 m/s
EPK 12: 7,3 kN - EPK 21: 13 kN • EPK 21 unità idropneumatica / EPK 21 hydropneumatic unitEPK 12 unità idropneumatica / EPK 12 hydropneumatic unit • EPK 12 Model - EPK 21 Model • Driving Force EPK 12: 7,3 kN (730 kg) at 6 bar • Driving ...
LDP Italia - Thrust Technology srl
Stroke : 200 mm
Bore: 12 mm - 50 mm
Pressure: 0.1 MPa - 1 MPa
Compact Guide Cylinder - MGPK Space efficient rigidity Optimise your space - Compact and lightweigh design Achieve high performance and rigidity - ±0.03° of non-rotating accuracy Get high degree of mounting and design ...
SMC
Stopper D28L, N10 To stop material shuttles ergonomically at just one point All-purpose option for attachment to different round tubes and profile cross-sections Stopper tension path: 34 mm Packaging unit 1 Scope of delivery Incl. ...
Stroke : 10 mm - 200 mm
Pressure: 1 bar - 10 bar
Rod diameter: 8 mm - 25 mm
The pneumatic cylinders feature magnetic pistons and are available in the following versions: double-acting with fixed end position damping, double-acting with adjustable end position damping According to DIN 6432
Pressure: 7 bar
Force: 0.23, 0.37, 0.56, 0.76, 1.35 kN
Link clamp pneumatic screw-on with flange Material: Body aluminum. Piston steel. Version: Body black anodised. Piston hard chrome-plated Note: Screw-in pneumatic link clamps with flange find ...
norelem - Éléments standard mécaniques
Pneumatic cylinder DIN ISO 15552 standard cylinder Description Material: Cylinder tube: aluminium. Endcap: die-cast aluminium. Piston rod: carbon steel 1.0503. Piston ...
norelem - Éléments standard mécaniques
DIN ISO 21287 pneumatic compact cylinder double-acting with magnetic piston Description Material: Cylinder tube: aluminium. End cover: die-cast aluminium. Piston rod: stainless steel ...
norelem - Éléments standard mécaniques
Stroke : 5 mm - 100 mm
Bore: 20 mm
Pressure: 4 bar - 10 bar
is a simple and reasonably priced component with a lot of automation. It is torsion-proof and has a universal holder for all our suction cup models with a 1/8" or 1/4" outside fitting (SG..., SH..., SO..., and SR...). Version "V" has ...
Stroke : 1 in - 2 in
Pressure: 0 psi - 250 psi
Force: 0.71 N - 0.79 N
... of early failure in cylinders. Dynamic lip seals have a U-shaped cross section. These Beswick cylinders are rebuildable, fit most standard mountings, are ideal for long life service applications and ...
Stroke : 0.15 in
Pressure: 0 psi - 250 psi
Force: 0.14 N - 0.15 N
The 7/16″ bore air cylinder is available with 5/32″ stroke and features a spring return option. Force Factor: 0.150 in extension, 0.138 in retraction. Approximate Weight: 31g in brass. Weight will ...
Force: 43 kN
Schmidt® Double-acting barrel units are valuable segments for the development of exceptional machines. They could be mounted freely and are outfitted with a magnet unit for discovering the comparing end position utilizing a chamber switch. ...
Torque: 0.38, 0.8, 2.25 Nm
Vane rotary units Compatct Rotation 180° or 90° Special angle on request Push-rod to adjust the angle Shock absorbers
Stroke : 25 mm - 200 mm
Force: 38 N - 961 N
Speed: 0.1 m/s - 0.5 m/s
Pneumatic linear unit Cheaper Sliding on linear bearing or bushes Push up to 1200 N Stroke up to 200 mm
Stroke : 20 mm - 150 mm
Force: 400 N - 6,230 N
Speed: 0.1 m/s - 0.5 m/s
Pneumatic linear unit Fluid feed-through the shafts Rigid 4 shafts Pneumatic or hydraulic Push up to 1550 N Stroke up to 150 mm
Stroke : 0 mm - 40 mm
Force: 4.5 kN
capacity: 4,5 kN stroke: 40 mm - 120 mm depending of model DAF press cylinders are ready-to-use building blocks for plant and special machine construction. DAF press cylinders have a modular design ...
Stroke : 1 mm - 30 mm
● High-speed cylinder with integrated solenoid valve. 100 Hz maximum operating frequency. Perfect for removal of heavy defective products, etc
Koganei Corporation
Stroke : 25 mm - 3,000 mm
Force: 160 N - 12,270 N
ALPHA AUTOMATISMES Sarl
Stroke : 50 mm - 1,000 mm
Force: 150 N - 80,000 N
Speed: 0 m/s - 1 m/s
ALPHA AUTOMATISMES Sarl
Stroke : 50 mm - 1,000 mm
Force: 200 N - 7,900 N
Speed: 0 m/s - 1 m/s
ALPHA AUTOMATISMES Sarl
Stroke : 107 in
Bore: 2.3, 2.8, 3.4, 4.5 in
Pressure: 10 bar
... low-friction dynamic sealing has led to the development of ControlAir’s line of Diaphragm Air Cylinders. These cylinders provide virtually frictionless conversion of pneumatic ...
ControlAir
Stroke : 10 mm - 250 mm
Pressure: 1 bar - 10 bar
Rod diameter: 12 mm - 25 mm
Guided cylinder type FDG with plain bearing Guide: Plain bearing Construction type: Piston rod cylinder Cushioning: Elastic cushionung on both sides Position sensing: for proximity switch in ...
Rod diameter: 20 mm - 26 mm
Force: 4,000 N - 6,300 N
... locating cylinders to be ideally adjusted to suit the clamping task. Due to the small diameters, the spacing between the locating cylinders can also be reduced. The 3 clamping balls are mechanically ...
Stroke : 150 mm - 5,500 mm
Rod diameter: 63 mm - 500 mm
The mining cylinder series includes single-acting, double-acting, and telescopic cylinders . They have been awarded many national certificates.
Shandong Mining Machinery Group Company
Stroke : 5 mm - 48 mm
Bore: 12 mm - 116 mm
Torque: 2 Nm - 2.95 Nm
... in linear axes, in toolmaking and tool machines, in hydraulic and pneumatic equipment, handling equipment and other applications. Application field Linear slides, Pneumatic cylinders, ...
ACE
Stroke : 20, 10 mm
Bore: 5 mm
... to install and save room, thickness only 7mm,can stall assembly. · With sucker port and shock absorbing structure slim cylinder · Inpect part cleaning,strengthen non-rotating accuracy · The body thickness is 7mm, ...
Force: 4,000 N
Short-stroke cylinder PM-100 | Pneumatic clamping apparatus SHG / SH pneumatic Specifications For more rapid cycles and a greater clamping force Can be supplied with already mounted ...
Stroke : 0 mm - 305 mm
Bore: 32 mm - 250 mm
Pressure: 0.1 MPa - 1 MPa
Standard cylinder used in all walks of life, specifically with the lift valve on the dust removal equipment, customized according to customer's specific requirements and demand different cylinder flange ...
Speed: 30 mm/s - 500 mm/s
... which is convenient for installation. 4.Terminal position with precise stroke adjustment, and can ease the impact of the cylinder 5.With a magnetic induction groove around the coffin, convenient installation induction ...
Stroke : 1 in - 16 in
... is our PVC Air Cylinders. Catalog selections are: * 1 inch to 16 inch stroke lengths * Ext/Int O-Ring Type (4 available) * Rod End Connection Style (8 available) * Optional Sensor Pack & Clevis ...
Stroke : 1 mm - 100 mm
Pressure: 0 bar - 5 bar
... energy saving compared to conventional pneumatic cylinders. In fact, the Eclore actuator does not generate friction and therefore does not lose “useless” energy which penalizes current solutions. The ...
Force: 4,500 N - 34,000 N
DAF direct-acting press cylinders with flange have been designed for flexible use in special machines. DAF press cylinders are equipped as standard with all advantages of modern pneumatic ...
Please specify:
Help us improve:
remaining